- Methodology article
- Open Access
g you The direct determination of haplotypes from extended regions of genomic DNA
© Stirling and Stear; licensee BioMed Central Ltd. 2010
- Received: 10 August 2009
- Accepted: 6 April 2010
- Published: 6 April 2010
One of the major obstacles to the exploitation of genetic variation in human medicine, veterinary medicine, and animal breeding is the difficulty in defining haplotypes in unrelated individuals.
We have developed a Multiplex Double Amplification Refractory Mutation System combined with Solid Phase PCR on Fluorescently labelled beads. The process is inherently amenable to automation. It provides a high degree of internal Quality Control, as each PCR product is represented in duplicate on the bead array, and each SNP is tested against multiple partners. This technique can resolve very complex genotypes into their constituent haplotypes; it defined all the alleles at 60 SNP in exon 2 of the ovine DRB1 MHC locus in a sample of 109 rams. These 60 SNP formed 33 DRB1 exon 2 alleles; two of which had not been previously identified; although both of them have been independently confirmed.
This technique has the same resolution as allele specific sequencing. Sequencing has the advantage of identifying novel polymorphic sites but where all SNP sites have been identified this novel procedure can resolve all alleles and haplotypes and identify novel combinations of polymorphisms. This method is similar in price to direct sequencing and provides a low cost system for direct haplotyping of extended DNA sequences.
- Amplification Refractory Mutation System
- Linkage Phase
- DRB1 Locus
- Bead Population
- Allele Specific Sequencing
One of the major priorities in genome analysis is to determine the joint inheritance and the population-wide associations among contiguous alleles on the same chromosome. This is known as the haplotype structure of a population and it is an essential part of the genetic architecture. The haplotype structure determines the usefulness of closely linked markers in identifying disease-susceptible individuals or genetically superior livestock. It also influences genetic interactions. For example, a polymorphism in a promoter, an enhancer or another regulatory element may interact differently with an allele on the same or on an opposing chromosomal strand.
Either deductive or direct approaches can be used to define haplotypes. The deductive approach infers haplotypes from the inheritance patterns in families or from the observed associations among genotypes . This approach is widely used. However, the algorithms can have error rates between 2 and 48% [1, 2].
Direct approaches analyse single chromosomes. The first techniques used cloning and sequencing , but this is time-consuming and impractical for large populations. Subsequently, SNP were used to design allele specific primers and the resulting products were then sequenced. This approach was used to haplotype a 6.4 Kb fragment spanning the APOE gene  and a 19 Kb portion of the human glucocorticoid receptor . Lo et al  used allele-specific forward and reverse primers to haplotype two SNP's <500 bp apart. This work was further developed by Eitan and Kashi  who determined the haplotypes of 14 SNP in a 653 bp segment of the chicken HSP 108 gene. While this method allows long regions of DNA to be haplotyped, it is a two stage process, requiring initial sequencing or genotyping to define suitablele SNP that can be used for allele specific PCR. Unfortunately, the fragments that can be analyzed are of limited size, and the dependence on electrophoresis as the end point greatly limits sample throughput. Clearly, a simple, reliable and rapid method for direct haplotyping is urgently needed.
The approach that we have developed has two stages. In the first stage, PCR is performed in the presence of all forward and reverse primers both in solution and linked to the beads. This overcomes some of the difficulties of solid phase PCR [8, 9] by allowing in-solution amplification of products, which are subsequently 'kidnapped' to the solid phase. In the second stage, the beads are washed free of non-covalently linked DNA, interrogated by allele specific primer extension with individual fluorescently labeled primers, washed and analyzed. This is a fully automatable procedure with a high degree of internal quality control.
We chose to test this procedure on the DRB1 locus of the sheep major histocompatibility complex. This locus and its homologues is among the most polymorphic in the mammalian genome. In sheep, over 100 alleles have been identified at this locus but additional alleles are believed to exist. The combination of high levels of diversity with unknown alleles provided a rigorous test of our procedure. In addition, sheep are an important commercial species and the DRB1 locus is associated with resistance to nematode infection [10, 11], which is a major disease of livestock including sheep . Therefore any results would have both scientific and commercial relevance.
The direct haplotyping procedure identified 33 exon 2 alleles at the DRB1 locus in 109 Scottish Blackface Rams. PCR using allele-specific primers and sequencing gave identical results. Both techniques identified one or two exon 2 alleles in all animals. Therefore both techniques appeared to identify all alleles in the population.
Alleles identified in Scottish Blackface sheep.
The fluorescent signal from the amplified products was readily distinguished from the background. The mean number of positive events in the absence of the SNP allele across all primers was only 9 ± 5. In contrast, the number of positive events in the presence of the SNP allele was 195 ± 12. Non-specific amplification was readily distinguished from allele-specific amplification by setting a threshold of 100 events.
A Multiplex double ARMS reaction on solid phase (Trans-Cistor) was used to determine the linkage phase of each pair of polymorphic sites and to resolve complex genotypes into constituent haplotypes. Essentially this technique determines whether the alleles at two linked SNP loci are in a trans or cis relationship. (Trans-Cistor). This approach has the same resolution as allele specific sequencing. In addition, unlike direct sequence based genotyping, it does not require the time-consuming and error prone assignment of alleles from a single polymorphic sequence. However, direct sequencing does have the advantage of identifying novel polymorphic nucleotides but for loci such as the MHC, the vast bulk of the variation is the result of novel combinations of polymorphisms at well-described positions. We have demonstrated that this technique (Trans-Cistor) is capable of identifying such novel exon 2 alleles. Importantly, both of the novel exon 2 alleles have been independently confirmed.
An alternative bead-based method has been developed independently . In this procedure, oligonucleotides specific for SNP allele are attached to differently-coloured fluorescent beads and use to probe amplicons which have been generated from the test genome. This procedure relies on allele-specific hydridisation and like the double ARMS procedure described here allows high-throughput determination of SNP haplotypes.
ARMS based techniques can be prone to both false positive (due to promiscuous priming) and false negative results (due to PCR failure). VOSS addresses these potential problems in a number of ways. Each PCR reaction uses at least four specific primers. When the sample is heterozygous at both SNP pairs, four positive reaction products are produced. Heterozygosity at only one of the pair produces 2 reaction products, whereas homozygosity at both members of the pair produces a single product. Each SNP is tested multiple times within the same reaction. In addition, there is a minimum of two positive fluorescent bead populations for every expected reaction. This inherent quality control greatly aids the confident assignment of haplotype. Such built in redundancy might generally be thought to be expensive. However the cost of the fluorescent beads (£1.60 or $3.00 per test) is in the same order as single sequencing reactions, and with all other reagents and consumables being common to both techniques, Trans-Cistor compares favorably in economic terms. Moreover, it is the potential to automate from PCR set up to haplotype identification that shows the greatest potential advantage.
Solid phase PCR has been reported to have an efficiency less than half that of liquid phase . We have adopted two strategies to address this. As each reaction is represented in both the liquid and solid phase, there is always a more efficient liquid phase reaction, producing template for the solid phase reaction. Additionally, the use of laser detection of fluorescent product on beads, allows detection of extremely small quantities of DNA, far less than could be visualized with ethidium bromide stained electrophoresis gels. Furthermore, while multiplex PCR reactions are prone to produce many spurious products that cannot be easily identified by electrophoresis, the detection system used here only identifies those products with the expected priming site at each end, eliminating the 'multiplex noise'.
PCR based techniques are always limited by the size of the DNA region which can be amplified efficiently and this may be a specific limitation on Solid phase PCR. We have tested this by amplifying portions of exon 14 of the human clotting factor VIII gene. Solid phase amplicons up to 10 Kb could routinely be produced, and amplicons up to 3.5 Kb could be readily produced in multiplex reactions (data not shown), demonstrating the power of the technique to determine haplotype over extended regions.
The double ARMS  method is a general approach to determining linkage phase of polymorphic markers. Trans-Cistor offers the ability to automate all the way through to haplotype. Its application extends to all uses of haplotype information including linkage analysis for the diagnosis of genetic diseases. Population studies on the geographical distribution of haplotypes can be performed without pedigree analysis. Haplotype information over extended regions may also be used to study genetic recombination.
The solid phase double ARMS is a robust method that has been applied to the complex DRB1 locus in sheep. However, this method could be used routinely for haplotype determination and could have many diagnostic applications. Potential applications include genotyping of viral strains in mixed infection, chimaerism following bone marrow or stem cell transplantation, and mapping the boundaries of translocations in malignant cell clones.
The Trans-Cistor procedure improves the accuracy with which linkage disequilibrium can be estimated. We compared linkage disequilibrium between SNP at positions 8 and 233. The first method used in individuals whose haplotypes are unknown, uses a composite linkage disequilibrium coefficient . In our sample the most common haplotype was AA with a frequency of 0.31 and a correlation coefficient of 0.23. In contrast, when the directly determined haplotypes were used the correlation coefficient was 0.17. As linkage disequilibrium is widely used to identify genetic markers for disease, the ability to obtain correct estimates in unrelated individuals without testing extended families will be invaluable.
The solid phase double ARMS approach combines exquisite sensitivity with the specificity to detect a minority DNA population. High accuracy results from multiple testing of each SNP and the repeated checking of phase against multiple sites.
We examined 109 rams. All rams were purebred Scottish Blackface rams from 12 Scottish farms in the 'Blackface Elite Sire Reference Scheme'. This is the largest sheep breeding scheme in the UK. Twenty-two different farms have the same breeding objectives and they share and exchange rams every year to facilitate comparisons among lambs from different farms. Over 10,000 lambs are produced every year. Blood sampling was covered by Home Office personal and project licences to M. J. Stear.
Primers for PCR amplification were purchased from MWG (Ebersberg, Germany), Expand long range Taq DNA polymerase from Roche Diagnostics (Burgess Hill, UK) and GoTaq Taq polymerase and dNTPs from Promega (Southampton, UK). Multiplex PCR Buffer was obtained from Point-2-Point Genomics (Edinburgh UK). Luminex beads were purchased from BioRad (Hemel Hempstead, UK). Standard reagents were from SigmaAldrich (Gillingham, UK) or BDH Laboratory Supplies (Poole, UK) in analysis grade, if not otherwise stated.
Sequences of allele specific primers used in this study.
Position in Reference sequence
13 - 30
25 - 40
35 - 53
35 - 53
36 - 54
45 - 61
56 - 71
71 - 86
71 - 87
104 - 121
158 - 176
172 - 157
172 - 155
165 - 146
165 - 146
216 - 199
Conjugation to Beads
Luminex (xMAP) suspension array technology is based on polystyrene beads with a diameter of 5.6 μm that are internally dyed with various ratios of two spectrally distinct fluorophores. Thus, an array of 100 different bead sets with specific fluorescent ratios is created. These sets are combined to a suspension array and, due to their unique fluorescence pattern, allow up to 100 different analytes to be measured simultaneously in a single reaction. Conjugation of oligonucleotides to carboxylated microspheres was done by a minor modification of the Luminex protocol [18, 19]. Briefly, 5 × 106 unlabeled, carboxylated microspheres, were vortexed in a 1.5 ml microcentrifuge tube, dispersed by sonication for 30 s, centrifuged at 8000 g for 1 min and, after supernatant removal, adjusted to 0.1 M 2-(N-morpholino) ethanesulfonic acid, pH 4.5. An aliquot of 1 nmol 5' amino-modified oligonucleotide was added, followed by 2.5 μl of fresh 1-ethyl-3-(3-dimethyaminopropyl)carbodiimide-HCl (Perbio Science, Cramlington UK) from a 10 mg/ml stock. After 1 h at room temperature the microspheres were repeatedly washed by centrifugation and stored at 4°C in the dark. A control oligonucleotide, with 5' amino link C12 spacer and 3'fluorescent label was conjugated with each batch of reactions to estimate conjugation efficiency.
Phase-1 reaction conditions
Reaction conditions, with MgCl2 concentration, primer concentrations, annealing temperature, and additives (e.g., bovine serum albumin and DMSO, TEMAC) were tested extensively to optimize the PCR reactions. Optimal conditions were 1× Multiplex PCR buffer, 2 nM MgCl2, 200 μM of each dNTP, 25 mU/μL of GoTaq DNA Polymerase, and sterile deionized water to the appropriate volume. Optimum primer concentrations were determined empirically. Each reaction included 2,000 beads of each specificity. After an initial denaturation at 95°C for 3 min, there were 10 cycles of 95°C for 15 s, 60°C for 20 s, 70°C for 45 s, and 20 cycles of 10 cycles of 95°C for 15 s, 55°C for 20 s, 70°C for 45 s. On completion of thermal cycling, the beads were washed 3 times by dilution in 200 μl TE (10 mM Tris, pH 7.4; 1 mM EDTA) and 30 s incubation at 95°C.
Phase-2 reaction conditions
For the second phase reaction, the beads were resuspended in a 25 μL reaction volume containing 1× Multiplex PCR buffer, 1 nM MgCl2, 50 μM of each dNTP, 25 mU/μL of GoTaq DNA Polymerase and 0.05 μM specific labeled primer. The reaction mixture was then incubated at 95°C for 15 s, and 65°C for 30 s. Beads were subsequently washed 3 times by dilution in 1× Multiplex PCR buffer and 30 s incubation at 75°C.
Analysis of beads
Following the final wash, the beads were resuspended in 0.5 ml TE, and analysed by flow cytometry on a FACSCalibur Flow cytometer (BD Biosciences). A single bead population was gated on forward and side scatter. 100,000 events from this population were then analysed on FL3 and FL4 to discriminate each of the bead populations. These individual bead populations were then gated, and analysed for FL1 and FL2 for the reporter fluorescence. A positive fluorescence was defined as being at least four fold higher than background fluorescence (measured in un-reacted beads). For a reaction to be scored as positive, both the beads representing that reaction (ie with the forward or reverse primer in the solid phase) had to be positive.
PCR of Sheep DNA for sequencing
DNA was extracted from jugular blood samples from 109 sheep, using standard phenol/chloroform methods. The second exon of DRB1 was amplified using a semi-nested PCR technique. The first round of PCR was performed with primers ERB3 (5'-GGAATTCCTCTCTCTGCAGCACATTTCCT-3') and HL031 (5'-TTTAAATTC GCGCTCACCTCGCCGCT-3') . 100 ng of genomic DNA was amplified by PCR in a total volume of 25 μl of PCR buffer (1× multiplex buffer, 1.5 mM MgCl2, and 120 μM dNTP), to which 0.2 mM each primer, and 25 mU/μL of GoTaq DNA Polymerase, and sterile deionized water to the appropriate volume had been added. Reactions were performed under the following conditions: 5 min at 94°C, followed by 15 cycles of 94°C for 15 s, 50°C for 30 s, and 72°C for 60 s, with final extension at 72°C for 5 min. We amplified 3 μl of the resulting mixture with primers ERB3 and SRB3 (5'-AAGTCGACCGCTGCACAGTGAAACTC-3') for the second round of PCR. The conditions for the second round of PCR were one cycle for 5 min at 94°C, followed by 30 cycles of 94°C for 30 s, 60°C for 30 s, and 72°C for 60 s with final extension at 72°C for 10 min. PCR products were checked by agarose gel electrophoresis, before being sequenced with primers ERB3 and SRB3. Forward and reverse sequences were aligned with Sequence Navigator Software (ABI), and where heterozygous bases were identified, a third sequencing reaction using an appropriate allele specific oligonucleotide (Table 2) was performed. Analysis of all sequences allowed haplotypes to be assigned.
Conventionally, a locus is the site of a gene on a chromosome while an allele is an alternative form of a gene and a haplotype represents a contiguous set of genes on a chromosome. The size of a gene can vary from a single nucleotide in an SNP allele to over 150,000 nucleotides in the Huntington's Disease locus. Some loci such as the MHC class II genes contain many SNP even within a single exon. Therefore a protein-coding allele can also be considered as an SNP haplotype. Usually, the context makes matters clear but to minimize potential confusion, we occasionally refer to SNP alleles, SNP haplotypes and protein-coding alleles.
This study was financed by a Department of Trade and Industry SMART award. Brendan Hamill assisted in the design of this study and Point-2-Point Genomics provided access to the patent.
- Niu T, Qin ZS, Xu X, Liu JS: Bayesian haplotype inference for multiple linked single-nucleotide polymorphisms. American Journal of Human Genetics. 2002, 70: 157-169. 10.1086/338446.PubMed CentralPubMedView ArticleGoogle Scholar
- Tishkoff SA, Pakstis AJ, Ruano G, Kidd KK: The accuracy of statistical methods for estimation of haplotype frequencies: an example from the CD4 locus. American Journal of Human Genetics. 2000, 67: 518-522. 10.1086/303000.PubMed CentralPubMedView ArticleGoogle Scholar
- Martinez-Arias R, Bertranpetit J, Comas D: Determination of haploid DNA sequences in humans: application to the glucocerebrosidase pseudogene. DNA Sequence. 2002, 13: 9-13.PubMedView ArticleGoogle Scholar
- Perez J, Garcia PM, Hernandez S, Mozos E, Camara S, Martinez-Moreno A: Experimental haemonchosis in goats: effects of single and multiple infections in the host response. Veterinary Parasitology. 2003, 111: 333-342. 10.1016/S0304-4017(02)00385-0.PubMedView ArticleGoogle Scholar
- Nagano M, Nakamura T, Ozawa S, Maekawa K, Saito Y, Sawada J: Allele-specific long range PCR/sequencing method for allelic assignment of multiple single nucleotide polymorphisms. Journal of BIochemical and Biophysical Methods. 2003, 55: 1-9. 10.1016/S0165-022X(02)00114-8.PubMedView ArticleGoogle Scholar
- Lo YM, Patel P, Newton CR, Markham AF, Fleming KA, Wainscoat JS: Direct haplotype determination by double ARMS: specificity, sensitivity and genetic applications. Nucleic Acids Research. 1991, 19: 3561-3567. 10.1093/nar/19.13.3561.PubMed CentralPubMedView ArticleGoogle Scholar
- Eitan Y, Kashi Y: Direct micro-haplotyping by multiple double PCR amplifications of specific alleles (MD-PASA). Nucleic Acids Research. 2002, 30: e62-10.1093/nar/gnf062.PubMed CentralPubMedView ArticleGoogle Scholar
- Shchepinov MS, Case-Green SC, Southern EM: Steric factors influencing hybridisation of nucleic acids to oligonucleotide arrays. Nucleic Acids Research. 1997, 25: 1155-1161. 10.1093/nar/25.6.1155.PubMed CentralPubMedView ArticleGoogle Scholar
- Southern EM, Mir K, Shchepinov MS: Molecular interactions on microarrays. Nature Genetics. 1999, 21: 5-9. 10.1038/4429.PubMedView ArticleGoogle Scholar
- Schwaiger FW, Gostomski D, Stear MJ, Duncan JL, McKellar QA, Epplen JT: An ovine major histocompatibility complex DRB1 allele is associated with low faecal egg counts following natural predominantly Ostertagia circumcincta infection. International Journal for Parasitology. 1995, 25: 815-822. 10.1016/0020-7519(94)00216-B.PubMedView ArticleGoogle Scholar
- Stear MJ, Innocent GT, Buitkamp J: The evolution and maintenance of polymorphism in the major histocompatibility complex. Vet Immunol Immunopathol. 2005, 108: 53-57. 10.1016/j.vetimm.2005.07.005.PubMedView ArticleGoogle Scholar
- Perry BD, Randolph TF: Improving the assessment of the economic impact of parasitic diseases and of their control in production animals. Veterinary Parasitology. 1999, 84: 145-168. 10.1016/S0304-4017(99)00040-0.PubMedView ArticleGoogle Scholar
- Hurley JD, Engle LJ, Davis JT, Welsh AM, Landers JE: A simple bead-based approach for multi-SNP molecular haplotyping. Nucleic Acids Research. 2004, 32: e186-10.1093/nar/gnh187.PubMed CentralView ArticleGoogle Scholar
- Shapero MH, Leuther KK, Nguyen A, Scott M, Jones KW: SNP genotyping by multiplexed solid-phase amplification and fluorescent minisequencing. Genome Res. 2001, 11: 1926-1934.PubMed CentralPubMedGoogle Scholar
- Weir BS, Cockerham CC: Estimation of linkage disequilibrium in randomly mating populations. Heredity. 1979, 42: 105-111. 10.1038/hdy.1979.10.View ArticleGoogle Scholar
- Newton CR, Graham A, Hepstinstall LE, Powell SJ, Summers C, Kalsheker N: Analysis of any point mutation in DNA. The amplification refractory mutation system (ARMS). Nucleic Acids Research. 1989, 17: 2503-2516. 10.1093/nar/17.7.2503.PubMed CentralPubMedView ArticleGoogle Scholar
- Sjöroos M, Ilonen J, Reijonen H, Lövgren T: Time-resolved fluoremetry based sandwich hybridisation assay for HLA-DQA1 typing. Disease Markers. 1998, 14: 9-19.PubMed CentralPubMedView ArticleGoogle Scholar
- Fulton RJ, McDade RL, Smith PL, Kienker LJ, Kettman JR: Advanced multiplexed analysis with the FlowMetrix system. Clinical Chemistry. 1997, 43: 1749-1756.PubMedGoogle Scholar
- Smith PL, Walker-Peach CR, Fulton RJ, DuBois DB: A rapid, sensitive multiplexed assay for detection of viral nucleic acids using the FlowMetrix system. Clinical Chemistry. 1998, 44: 2054-2056.PubMedGoogle Scholar
- Konnai S, Nagaoka Y, Takesima S, Onuma M, Aida Y: Technical note: DNA typing for ovine MHC DRB1 using polymerase chain reaction-restriction fragment length polymorphism (PCR- RFLP). Journal of Dairy Science. 2003, 86: 3362-3365. 10.3168/jds.S0022-0302(03)73939-3.PubMedView ArticleGoogle Scholar
- Ellis SA, Bontrop RE, Antczak D, Davies CJ, Kaufman J, Kennedy LJ: ISAG/IUIS-VIC Comparative MHC Nomenclature Committee report, 2005. Immunogenetics. 2006, 57: 953-958. 10.1007/s00251-005-0071-4.PubMedView ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.