 Methodology article
 Open Access
 Published:
Weighted pedigreebased statistics for testing the association of rare variants
BMC Genomics volume 13, Article number: 667 (2012)
Abstract
Background
With the advent of nextgeneration sequencing (NGS) technologies, researchers are now generating a deluge of data on high dimensional genomic variations, whose analysis is likely to reveal rare variants involved in the complex etiology of disease. Standing in the way of such discoveries, however, is the fact that statistics for rare variants are currently designed for use with populationbased data. In this paper, we introduce a pedigreebased statistic specifically designed to test for rare variants in familybased data. The additional power of pedigreebased statistics stems from the fact that while rare variants related to diseases or traits of interest occur only infrequently in populations, in families with multiple affected individuals, such variants are enriched. Note that while the proposed statistic can be applied with and without statistical weighting, our simulations show that its power increases when weighting (WSS and VT) are applied.
Results
Our working hypothesis was that, since rare variants are concentrated in families with multiple affected individuals, pedigreebased statistics should detect rare variants more powerfully than populationbased statistics. To evaluate how well our new pedigreebased statistics perform in association studies, we develop a general framework for sequencebased association studies capable of handling data from pedigrees of various types and also from unrelated individuals. In short, we developed a procedure for transforming populationbased statistics into tests for familybased associations. Furthermore, we modify two existing tests, the weighted sumsquare test and the variablethreshold test, and apply both to our familybased collapsing methods. We demonstrate that the new familybased tests are more powerful than corresponding populationbased test and they generate a reasonable type I error rate.
To demonstrate feasibility, we apply the newly developed tests to a pedigreebased GWAS data set from the Framingham Heart Study (FHS). FHSGWAS data contain approximately 5000 uncommon variants with frequencies less than 0.05. Potential association findings in these data demonstrate the feasibility of the software PBSTAR (note, PBSTAR is now freely available to the public).
Conclusion
Our tests show that when analyzing for rare variants, a pedigreebased design is more powerful than a populationbased case–control design. We further demonstrate that a pedigreebased statistic’s power to detect rare variants increases in direct relation to the proportion of affected individuals within the pedigree.
Background
In the last few years, researchers have conducted many GenomeWide Association Studies (GWAS) to identify common variants underlying common human disorders. Although earlier analyses of GWAS data revealed that this approach can detect common variants with modest effects, only a small portion of significantly associated common variants prove to be functional. In addition, GWAS typically requires large sample sizes to achieve reasonable power [1].
Therefore, to detect rare variants associated with common disorders, researchers are increasingly turning to next generation sequencing (NGS) [2]. In recent years, advances in NGS technology have generated large amounts of data on the exome and on wholegenome sequencing, moving us ever closer to an understanding of how rare variants contribute to human traits and diseases. While NGS technology holds great promise, its platforms suffer from a number of drawbacks including high rates of calling error (particularly for the rare variants) and many missing values (due either to variants’ low quality or their location in difficult regions). However, the familybased designs proposed in this study, can be used to reduce error rates by detecting Mendelian errors and to impute missing values.
Statistical approaches currently available for the analysis of rare variants’ contributions to the development of complex traits include: the Combined Multivariate and Collapsing (CMC) Method [3], the Multivariate test of collapsed subgroups, the Hotelling T^{2} test [4], MANOVA, the Fisher’s product method, the Weighted Sumsquare (WSS) [5], the KernelBased Adaptive Test (KBAT) [6], the VariableThreshold (VT) test [7]; the Sequence Kernel Association Test (SKAT) [8]; and the Functional Principal Component Test [9]. In addition, Neale et al. [10] proposed a method for testing the variance of the effects and Wu et al. [8] suggested a similar test using a slightly different approach. Han and Pan [11] modified Liu and Leal’s [3] original burden test to include the effect’s direction. More recently, Lin and Tang [12] have developed a generalized framework for the conduct of the statistical tests listed above. Researchers seeking to use different statistical methods to analyze NGS data may also wish to consult the following reviews of current methods for collapsing and pooling data: Bansal et al. [13], Basu and Pan [14], Feng et al. [15], and Lin and Tang [12].
Inasmuch as many common diseases such as cancer, cardiovascular disease, diabetes, immune disorders, and psychiatric disorders are known to cluster in pedigrees, there is a clear need to develop efficient statistical methods for analyzing sequencebased pedigree data. Yet despite its obvious importance, the use of pedigreebased collapsing methods to detect associations between diseases and rare variants in NGSgenerated data has yet to be investigated in depth.
With the aim of finding how multiple rare variants within a genomic region contribute individually and collectively to disease, this study shows how collapsing techniques currently used to analyze populationbased data can be adapted for the analysis of pedigreebased data. In our study design, therefore, all rare variants within a gene or a genomic region in pedigree data or a combination of pedigree and case–control data are collapsed into an overall variable.
To accomplish this aim, we developed a new pedigreebased method of association analysis for rare variants. Following the work of Thornton and McPeek [16], which used case–control association tests of common variants in related individuals, we devised a novel weighted statistic to compare affected and unaffected individuals within pedigrees using the value of their integrated overall variables, weighted by their Identity by Descent (IBD) coefficients. To evaluate the performance of this new method, we use simulations with varied pedigree structures to compute the type I error rates and power under different disease models. Our simulation results demonstrate that the proposed new method can be used with data from various study designs including case–control, sibpairs, nuclear families, and multigeneration families.
This manuscript introduces several new methods for the statistical analysis of pedigreebased data. These include new ways to estimate allele frequency and a kinship matrix from genotype data, statistics for collapsing familybased data, and a correction factor for relatedness affected and unaffected pairs within pedigrees. Using simulations with seven types of data structures, we evaluate our test statistics for impact of sample size, proportion of risk variants, and proportion of variants with effects in opposite directions, on type I error rates, and analytical power for detecting rarevariant association. After these evaluation tests and demonstrations, we conclude with a summary of our statistics’ merits and limitations.
Methods
For our readers’ convenience, we have included a glossary for parameters and definitions used in equations in Table 1.
Estimation of kinship matrix when allele frequencies are known
Consider m markers. Let x_{ ik } be the indicator variable of genotype for the kth variant of the ith individual, and the values are taken to be 0, 1 and 2 as the number of reference alleles. Let p_{ k } be the frequency of the reference allele of the kth variant (the allele frequency is the count of reference allele over the sum of two alleles in all individuals at a particular marker). The kinship coefficient matrix (Φ) is given by
where ϕ_{ ij } is the kinship coefficient between individual i and j In cases where the kinship matrix Φ quantifying relatedness among individuals is unknown, it can be estimated from genetic variants in the data. Recently, Yang et al. [17] derived equations to estimate the genealogy matrix (defined as genetic relationship matrix between pairs of individuals which mathematically equals 2Φ_{).} We simply followed the equation in Yang et al. [17] as:
The kinship coefficients are estimated by
In the presence of inbreeding, the estimated ψ_{ ii } is greater than 1 (in the manuscript by Yang et al., this is refer to as the “background effect”).
Estimation of kinship matrix when the population allele frequencies are not known
When estimates of allele frequencies based on population data are not available (i.e. variants that have not been genotyped in reference datasets such as 1000 Genomes or HapMap), we estimate the allele frequencies using the genetic marker information from pedigree members. An iterative algorithm initialized with the observed frequency across pedigrees is used to estimate these frequencies. We note that the use of rare variants could lead to unstable estimates of kinship coefficients, therefore, only common variants should be used for the estimation.
Step 1 (Initialization): Use the allele frequency computed in all pedigree members as ${\widehat{p}}_{k}$ to estimate the kinship matrix Φ_{(0)}.
Step 2 (Iteration) Let k be the kth variant in the genomic region. For the sth iteration, we conduct the following steps:

a)
Use Φ_{(s)} to estimate ${\widehat{p}}^{\left(s\right)}$, ${\widehat{p}}_{k}^{\left(s\right)}={\left({\mathbf{1}}^{T}{{\Phi}_{\left(s\right)}}^{1}\mathbf{1}\right)}^{1}{\mathbf{1}}^{T}{{\Phi}_{\left(s\right)}}^{1}{\left({x}_{1k,}{x}_{2k,\dots ,}{x}_{\mathit{nk}}\right)}^{T}$ where 1 is a vector of 1’s and (x _{1k} , x _{2k} ,…,x _{ nk }) is a vector of the indicator variable for genotypes at the kth variant in the genomic region as defined above (k = 1,…,m).

b)
Use this ${\widehat{p}}^{\left(s\right)}$ to estimate Φ_{(s+1)}.

c)
Stop at convergence or at a predetermined maximum iteration limit.
Collapsing method fundamentals
We extend the populationbased collapsing test to families with either known or unknown population structures. Let n be the number of individuals in the sampled pedigrees, an indicator variable for the ith individual in the pedigrees is defined as
where i = 1, …, n.
Let Z = [z_{1}, z_{2},…, z_{ n }]^{T}. Under the null hypothesis (the genomic region has no association with the disease), the expectation of the vector of indicator variables is given by:
where p = Pr(presence of rare variants in the genomic region). If we reject the null hypothesis, it is assumed that
where
We define μ = [μ_{1}, μ_{2}, …, μ_{ n }]^{T}. The partial derivative of μ with respect to p is given by
Similarly, we have ${D}_{r}=\frac{\partial \mu}{\partial r}=u\text{,}$ where u = [u_{1}, u_{2}, …, u_{ n }]^{T}.
Next, we calculate the covariance matrix of the vector Z. Let h_{ i } be the inbreeding coefficient of individual i. Let σ^{2} = p(1–p). For computing the expectations by conditioning, we have
By the same token, we have
The kinship coefficients in equations (2a) and (2b) are estimated by equation (1a) and (1b), where the inbreeding coefficient h_{ i } of individual i can be estimated by ϕ_{ ii }–1.
Combining equations (2a) and (2b), we can obtain the following covariance matrix of vector Z:
Let
where n_{ c } is the number of cases and the variance of H_{ C } is given by
The statistic for testing the association of a genomic region containing the disease locus can be defined as
However,
where n_{ G } is the number of controls, ${\overline{Z}}_{A}{\phantom{\rule{0.25em}{0ex}}\text{and}\phantom{\rule{0.25em}{0ex}}\overline{\mathrm{Z}}}_{G}$ are the averages of indicator variables in cases and controls, respectively. The test statistic can then be rewritten as:
where T_{ C } is the populationbased collapsing test statistic and ${P}_{\mathit{corr}}=\frac{n}{{n}_{c}{n}_{G}}{\left({D}_{r}\frac{{n}_{c}}{n}{D}_{p}\right)}^{T}\Phi \left({D}_{r}\frac{{n}_{c}}{n}{D}_{p}\right)$ is a correction factor. Under the null hypothesis of no association, T_{ CF } is distributed as a central χ_{(1)}^{2} distribution. It follows that when the correction factors are computed using the IBD information, the relatedness effect (if present) can be easily corrected.
Similarly, populationbased weighted sum (WSS) and variant threshold (VT) tests can also be extended to pedigrees:
Single marker analysis
Although the main focus of this investigation is to develop weightbased collapsing statistics to analyze for rare variants in families, for comparison, we also use a Chisquared test to calculate an individual pvalue for each variant in a given gene. For every gene considered, we select the variant with the lowest pvalue and then permute the diseasenormal status 5000 times to obtain an empirical p value for the selected variant. This permutation test is conducted using the following mathematical formula.
Let P_{min} be the minimum p value of the Chisquare tests among all variants in a gene. Let ${p}_{\text{mim}}^{\left(1\right)},\dots ,{\text{pmim}}^{\left(5000\right)}$ be the minimum p value in 5000 permutations. The empirical p value can be expressed as ${\sum}_{\mathit{b}=1}^{5000}\mathit{I}\left({\mathit{P}}_{\text{min}}^{\left(\mathit{b}\right)}\le {\mathit{P}}_{\text{min}}\right)/5000$.
Using simulation to estimate power and type I error rate
In this study, the forward evolutionary simulation tool ForSim[18] was used to simulate genetic data taking pedigree structures and evolutionary processes (such as natural selection, mutation rate and population demographics) into account. These simulated data were then analyzed with our PB_STAR software to calculate the power and type I error rates for familybased single marker analysis (using a Chisquare test) and for two collapsing methods: WSS and VT. Under four simulation models (dominant, multiplicative, additive and recessive), the mutation rate was assumed to be 2.5 × 10^{8}. We set the total number of generations as 100, the recombination rate as 1 cM per Mb, the disease prevalence as 0.09 and the growth rate as 2.1. Parameters were set to simulate the desired pedigrees with a fixed ratio of affected and unaffected individuals within a pedigree.
ForSim is a flexible software package that allows users to redefine case or control status by making specific assumptions about disease frequency and penetrance when associated with dominant, recessive and multiplicative models. When we later reassigned case status using a penetrance function, we found that, changing simulation parameters does not significantly impact either power or type I error rates (data not shown).
ForSim also allows generation of hundreds of functional variants in two unlinked genes, with only one gene relevant to the disease phenotype of interest. All variants were presumed to influence the disease in an additive fashion. Variants arising by mutation were assigned effect sizes. In this way, we simulated 100 generations of a single population, allowing variants to accumulate until the last generation, which showed a total disease prevalence of 0.09. From this set of pedigrees, we randomly sampled for six types of desired pedigree, each with at least two affected individuals. The procedure for calculating the type I error rate and power is detailed below.
Type I error rate
To assess type I error rates of the test statistics, we simulated seven settings of data with different sample sizes and pedigree designs: 1) a population design with equal number of cases and controls (case–control design); 2) Sibpair families without parental genotypes, ratio of affected/unaffected is 1 (Sibpair1); 3) sibpair families without parental genotypes, ratio of affected/unaffected is 2 to 1 (Sibpair2); 4) nuclear families with offspring, ratio of affected/unaffected is 1 (Nuclearfamily1); 5) nuclear families with offspring, ratio of affected/unaffected is 2 (Nuclearfamily2); 6) three generation families with children and grandchildren, ratio of affected/unaffected is 1 (Threegeneration1) and 7) Three generation families with children and grandchildren, ratio of affected/unaffected is 2 (Threegeneration2). To calculate type I error rates, 5000 simulated replicates were performed for each design. “Rare variants” were defined as variants with Minor Allele Frequency (MAF) of less than 1%.
Power
To evaluate the power of the proposed test statistics by simulation, we had first to determine disease status based upon individual genotype and penetrance at each locus. Each group’s population attributable risk (PAR) was set as 0.006 [19], the genotype relative risk was set to be inversely proportional to its MAF. It was further assumed that the baseline penetrance of the wildtype genotype is equal across all variants sites and that variants influence disease susceptibility independently (i.e. with no epistasis). More specifically, at the kth variant site, let γ_{2k} be the relative risk for genotype 2, and let γ_{1k} be the relative risk for genotype1. For the dominant model: γ_{2k} = γ_{1k}, for the additive model: γ_{2k} = 2γ_{1k}–1, for the multiplicative model: γ_{2k} = γ_{1k}^{2}, and for the recessive model: γ_{1k} = 1. Seven design settings were simulated under these four different models. We assigned each individual to either a case or control groups depending upon their “disease status”. We also varied study design and pedigree structure in our simulations to see how sample size and proportion of causal variants (PCV) to noncausal variants (NCV) affect the power of test statistics and to provide practical guidelines for sampling.
Weights
Madsen and Browning [5] proposed analyzing for rare variants using a collapsing method with weights based on variant frequency. Because these weights depend on phenotypic values, they further suggested a permutationbased test to calculate pvalues. Although it also requires the use of permutation to calculate pvalues, the VT method, by contrast, does not rely on assumptions about the distribution of effect size. In this study, both WSS and VT were used to analyze our simulated data and to calculate pvalues based upon permutations. Obviously, more permutation runs are likely to lead to more precise estimation of power, although the computational burden is also increasingly greater. In this study, estimation of power is based upon 5000 permutation runs.
In addition evaluations based on results from the seven simulation designs described above, we used our test statistics in two additional simulations, whose mixed population designs more closely resemble those found in actual studies. The first design is a mix of 33% Sibpair2 families, 33% Nuclear2 families, and 34% Threegeneration2 families (Mix1). The second design is a mix of 50% Sibpair2 families and 50% Nuclear2families (Mix2). We compared the power of two mixed designs and unmixed designs using simulation.
Results
In this section, we present the results from tests assessing the power and type I error rate of our proposed method. The following section describes our tests for the effects of sample size, the proportion of risk variants, and variants functioning in opposite directions in seven different simulated pedigree settings.
Empirical Type I error rates
To evaluate type I error rates, we consider two scenarios for relatedness of individuals. In the first scenario, we use theoretical kinship coefficients between pairs of individuals in the same pedigrees as our kinship coefficients, assuming that kinship coefficients between pairs of individuals who are in different pedigrees are zero. In the second scenario, whether or not paired individuals are from the same pedigree, all kinship coefficients between pairs of individuals are estimated by genotyped variants. These tests show that in both singlemarker and collapsing tests, failure to correct for population structure results in inflated type I error rates. Simulation results also indicate that with or without weights, Type I error rates for all collapsing tests do not deviate from the nominal level (Table 2).
Calculations further show similar type I error rates regardless of pedigree structure (hybrid design, sibpair, nuclear family, or threegeneration family). Even after correction factors (calculated using estimated or true IBD coefficients) are applied, type I error rates do not differ significantly from nominal levels (α = 0.05, 0.01, and 0.001), regardless of the type of collapsing methods used. (See Table 2 for results from our type I error rate validity tests in a hybrid design (N = 2100), in which half the data come from nuclear families).
Analytic power
To test the analytic power of our proposed method, we conducted three sets of simulations in which four statistics (corrected singlemarker Chisquares, familybased collapsing methods, VT, and WSS) are used to analyze for four disease models (dominant, additive, multiplicative, and recessive).
In Figures 1, 2, 3, 4, the X axis stands for sample size, which varies from 900 to 2100. “1” indicates single marker test; “2” indicates familybased collapsing test; “3” indicates familybased VT test; “4” indicates familybased WSS test. In Figures 5, 6, 7, 8, the X axis stands for the proportion of risk variants. “5” indicates single marker test; “6” indicates familybased collapsing test; “7” indicates familybased VT test; “8” indicates familybased WSS test. In Figures 9, 10, 11, 12, the X axis stands for the sample size when the variants with effect of opposite side are considered. “9” indicates single marker test; “10” indicates familybased collapsing test; “11” indicates familybased VT test; “12” indicates familybased WSS test)In all instances, total trend significance level of alpha = 0.05. To reduce the number of graphs presented in the main body of this manuscript, power calculations for additive, multiplicative, and recessive models appear as Additional files 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36.
Power was tested in seven study designs: unrelated individuals in case–control studies, Nuclearfamily1 and −2, Sibpair1 and −2, and Threegeneration1 and −2. General assumptions are a homogeneous population, 20% of causal variants, and a baseline penetrance of 0.01. Figure 2(AD) shows the calculation of power to PCV when N = 1800 individuals.
Results from these analyses, although preliminary, confirm our hypothesis that a pedigreebased study design is more powerful than designs based on data from unrelated cases and controls, and that collapsing methods are more powerful than singlemarker analysis. As expected, our results also confirm that collapsed methods without weights have weaker analytic power than either WSS or VT (although with or without weighting, differences in power are reduced with an assumed PCV as high as 2030%), (See Figures 1, 2, 3, 4 for dominant model and Additional files 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 for nondominant models).
The finding that is perhaps most significant for the design of studies in future is that analytic power is directly related to both the complexity of pedigree structure and the proportion of affected individuals in the sample. We believe that the fact that more complex pedigrees contain more information on the coinheritance of rare risk variants in association with disease status accounts for much of our proposed method’s increased power to detect rare causal variants.
This exploratory study also shows that a mixed design (Sibpair2, Nuclearfamily2, and Threegeneration2) is slightly less powerful than a Threegeneration2 design, and that a halfandhalf mixed design (50% Sibpair2 and 50% Nuclearfamily2) has analytic power similar to that of the Sibpair2 and Nuclearfamily2 designs (See Table 3). Since mixed designs more closely approximate reality, this result increases our confidence that the proposed new method will work well with real data.
According to our calculations (in which PCV varied from 1030% and the number of sampled individuals in the pedigree varied from N = 900 to 2,100), the Threegeneration2 design consistently gives the best power, followed by Nuclearfamily2 and Sibpair2 designs. That is, with a power difference of approximately 49%, Threegeneration2 outperforms Threegeneration1; Nuclearfamily2 outperforms Nuclearfamily1; and Sibpair2 outperforms Threegeneration1. As expected, the case–control design gives the lowest power (See Figures 5, 6, 7, 8 and Additional files 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24).
To evaluate power where variants are associated with varying directions of association, we simulated a data set assuming that of 20% causal variants, half confer risk and half are protective. Although the presence of both risk and protective variants reduces the power to some extent, we found that the impact of opposing directions of association on power is reduced under the dominant model as the complexity of pedigree structure increases. Our method, in fact, performs best under the dominant model (see Figures 9, 10, 11, 12); has slightly reduced power under the multiplicative model, less under the additive model, and least under the recessive model (see Additional files 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36).
Applying PBSTAR to Framingham Heart Study data set
To test our proposed study statistics on real data, we applied it to a GWAS data set from the Framingham Heart Study (FHS) [20] hosted by dbGAP. The proposed statistics were then used to test for associations of multiple variants with various cardiovascular diseases (CVD) including coronary heart disease (CHD), stroke, heart failure (HF) and atrial fibrillation (AF) (see Kannel et al. [21]).
We applied our proposed statistics to the Framingham Study data set using the Affymetrix 500 K platform, with CVD as the main phenotype. (Note that, to gain more variants with the Affymetrix 500 K platform, we changed our threshold variants from our standard 0.01 to 0.05). In this data set, a total of 1,603 individuals were genotyped, of which 267 were affected. In the end, our pedigree analysis included 462 pedigrees: 320 sibpairs without parents, 138 pedigrees with 2 generations and 4 pedigrees with 3 generations. SNPs that failed to pass the Mendelian error check test or had allele frequencies greater than 0.05 were excluded. Our analysis included 4,376 genes with 35,507 SNPs. To obtain the estimated IBD for each pair of individuals, we randomly selected 1000 SNPs (the Rsquare between any pair of these SNPs was less than 0.2) spaced over the genome.
In our simulations, the WSS statistic shows consistently higher power than the other three test statistics evaluated. Using WSS with a cutoff threshold of 2 × 10^{–3}, we identified 21 potentially significant genes including B4GALNT2, AKAP7, DYRK1A and FAM19A2 (See Table 4). Although the biological relationship between B4GALNT2 and human heart diseases has yet to be documented, AKAP7 [22], DYRK1A [23] and FAM19A2 [24] have all been implicated in its etiology. Taken together, these results from our analysis of FHS data support the hypothesis that the genes B4GALNT2, AKAP7 and DYRK1A may be significant for development of CVD although further molecular tests are needed to test these hypotheses although further molecular tests are warranted.
Discussion
While a number of methods currently exist for collapsing rare variants into a single group to test for differences in their collective frequency in cases and controls, methods using familybased statistics to test for rare variants associations in multigenerational families have rarely been discussed. Since we expect causal rare variants to be more enriched in extended pedigrees than in the general population and also in nuclear families, complex pedigrees should be the ideal source of information on rare variants’ contribution to human disorders. Results from our preliminary simulations appear to support the added value of looking for rare causal genetic variants in large and complex pedigrees.
As described in the Methods and Results sections above, we devised simulations to test the power of our new statistics and their type I error rates. Results from tests using seven different study designs and dominant, additive, recessive, and multiplicative models of disease indicate that our statistic performs best with the dominant disease model and, as expected, a study population made up of threegeneration families with an affected/ unaffected ratio of 2 to 1.
These results suggest that our proposed statistics can substantially benefit researchers seeking to sequence exomes or whole genomes with a pedigreebased approach. Since computations based on family data association tests are almost as efficient as those based on population data, moreover, it should be possible to combine results from both. (See, for instance, Table 3, which contains results from pedigreebased association tests to detect rare variants in mixedpedigree populations.)
Additionally, while earlier familybased linkage approaches rely on chromosomal segments shared by related individuals within pedigrees, our method reveals nucleotidesite similarities in segments shared across pedigrees.
As indicated in our introduction, this work was inspired by Thornton and McPeek [25] who offer two ways to analyze genetic associations: 1) using the standard χ^{2} statistic with a correction factor that takes pedigree information into account; and 2) using a factor that corrects for the conditional probability of IBD sharing. In a later publication [16], the same authors proposed the “Quasilikelihood Score” (W_{QLS}), another useful statistic that, according to their simulations, outperforms earlier methods. The new method introduced here uses a correction method (detailed in the Method section above) similar to that of Thornton and McPeek. While earlier pedigreebased methods are limited to the analysis of single markers, ours analyzes associations among multiple markers. Our results confirm the superior power of familybased analysis. They also confirm the need to correct for relatedness in order to reach appropriate rates of type I error.
Before drawing conclusions from this study, we would like to point out its limitation. As a ‘proof of concept’ analysis for a new statistic for the analysis of pedigree data, this study is of necessity schematic and introductory. In our simulations, for instance, both disease models and population structures were purposefully kept simple enough for us to monitor statistical behavior. Although our results are preliminary, they appear to confirm the new test statistic’s potential usefulness for the analysis of pedigreebased NGS data.
Conclusions
This study introduces a new, familybased statistic to analyze for rare variants segregated in pedigrees. This new statistic is based on three principles: 1) It collapses data to deal with the problem of identifying rare variants in a gene or a genomic region. 2) It uses IBD coefficients to correct for relatedness and assure validity and power. 3) It applies two weights, WSS and VT, to increase the statistic’s power to detect rare variants.
Using computer simulations, we showed that 1) our pedigreebased design is more powerful than population based case–control designs; 2) the higher the number of affected individuals in a pedigree, the higher the complement of rare variants 3) WSS performs slightly better than VT; and 4) as the proportion of causal variants increases, so does the power gain of WSS or VT over an unweighted collapsing method. The power gain using WSS and VT versus the collapsing method without weights increases with the increase in proportion of causal variants. Finally, we confirmed the usefulness of our new statistic in real data, a GWAS data set from the FHS. Since NGS data from the same cohort are expected to be available soon on the genes containing rare variants associated with heart disease identified by our analysis, we look forward to being able to use these data to validate our current findings, and to discover new signals, in the near future. Our “PBSTAR” software is now freely available at: https://sph.uth.edu/hgc/faculty/xiong/softwareE.html.
References
 1.
Ehret G: Genomewide association studies: contribution of genomics to understanding blood pressure and essential hypertension. Curr Hypertens Rep. 2011, 12: 1725.
 2.
Lupski JR, Belmont JW, Boerwinkle E, Gibbs RA: Clan genomics and the complex architecture of human disease. Cell. 2011, 147: 3243. 10.1016/j.cell.2011.09.008.
 3.
Liu DJ, Leal SM: A novel adaptive method for the analysis of nextgeneration sequencing data to detect complex trait associating with rare variants due to gene main effects and interactions. PLoS Genet. 2010, 6: e100115610.1371/journal.pgen.1001156.
 4.
Xiong M, Zhao J, Boerwinkle E: Generalized T2 test for genome association studies. Am J Hum Genet. 2002, 70: 12571268. 10.1086/340392.
 5.
Madsen BE, Browning SR: A groupwise association test for rare mutations using a weighted sum statistics. PLoS Genet. 2009, 5: e100038410.1371/journal.pgen.1000384.
 6.
Mukhopadhyay I, Feingold E, Weeks DE, Thalamuthu A: Association tests using kernelbased measures of multilocus genotype similarity between individuals. Genet Epidemiol. 2010, 34: 213221.
 7.
Price AL, Kryukov GV, Bakker PIW, Purcell SM, Staples J, Wei LJ, Sunyaev SR: Pooled association tests for rare variants in exonresequencing studies. Am J Hum Genet. 2010, 86: 982
 8.
Wu MC, Lee S, Cai T, Li Y, Boehnke M, Lin X: Rare variant association testing for sequencing data using the sequence kernel association test (SKAT). Am J Hum Genet. 2011, 89: 8293. 10.1016/j.ajhg.2011.05.029.
 9.
Luo L, Boerwinkle E, Xiong M: Association studies for nextgeneration sequencing. Genome Res. 2011, 21: 10991108. 10.1101/gr.115998.110.
 10.
Neale BM, Rivas MA, Voight BF, Altshuler D, Devlin B, OrhoMelander M, Kathiresan S, Purcell SM, Roeder K, Daly MJ: Testing for an unusualdistribution of rare variants. PLoS Genet. 2011, 7: e100132210.1371/journal.pgen.1001322.
 11.
Han F, Pan W: A dataadaptive sum test for disease association with multiple common or rare variants. Hum Hered. 2010, 70: 4254. 10.1159/000288704.
 12.
Lin DY, Tang ZZ: A general framework for detecting disease associations with rare variants in sequencing studies. Am J Hum Genet. 2011, 89: 354367. 10.1016/j.ajhg.2011.07.015.
 13.
Bansal V, Libiger O, Torkamani A, Schork NJ: Statistical analysis strategies for association studies involving rare variants. Nat Rev Genet. 2010, 11: 773785.
 14.
Basu S, Pan W: Comparison of statistical tests for disease association with rare variants. Genet Epidemiol. 2010, 10: 626660.
 15.
Feng T, Elston RC, Zhu X: Detecting rare and common variants for complex traits: sibpair and odds ratio weighted sum statistics (SPWSS, ORWSS). Genet Epidemiol. 2011, 35: 398409. 10.1002/gepi.20588.
 16.
Thornton T, McPeek MS: Roadtrips: Case–control association testing with partially or completely unknown population and pedigree structure. Am J Hum Genet. 2010, 86: 172184. 10.1016/j.ajhg.2010.01.001.
 17.
Yang J, Benyamin B, McEvoy BP, Gordon S, Henders AK, Nyholt DR, et al: Common SNPs explain a large proportion of the heritability for human height. Nat Genet. 2010, 42: 565608. 10.1038/ng.608.
 18.
Lambert BW, Terwilliger JD, Weiss KM: ForSim: a tool for exploring the genetic architecture of complex traits with controlled truth. Bioinformatics. 2008, 24: 18211822. 10.1093/bioinformatics/btn317.
 19.
Li Y, Byrnes AE, Li M: To identify associations with rare variants, Just WhaIT: weighted haplotype and imputationbased tests. Am J Hum Genet. 2010, 87: 728735. 10.1016/j.ajhg.2010.10.014.
 20.
Larson MG, Atwood LD, Benjamin EJ, Gupples LA, et al: Framingham Heart Study 100 K project: genomewide associations for cardiovascular disease outcomes. BMC Med Genet. 2007, 8: S510.1186/147123508S1S5.
 21.
Kannel WB, Feinleib M, McNamara PM, Garrison RJ, Castelli WP: An investigation of coronary heart disease in families. The Framingham offspring study. Am J Epidemiol. 1979, 110: 281290.
 22.
Aye TT, Soni S, van Veen TA, van der Heyden MA, Cappadona S, Varro A, de Weger RA, de Jonge N, Vos MA, Heck AJ, Scholten A: Reorganized PKAAKAP associations in the failing human heart. J Mol Cell Cardiol. 2011, 10.1016.
 23.
Kuhn C, Frank D, Will R, Jaschinski C, Frauen R, Katus HA, Frey N: DYRK1A is a novel negative regulator of cardiomyocyte hypertroply. J Biol Chem. 2009, 284: 1732017327. 10.1074/jbc.M109.006759.
 24.
Parsa A, Chang YPC, Kelly RJ, Corretti MC, Ryan KA, Robinson SW, Gottlieb SS, Kardia SLR, Shuldiner AR, Liggett SB: Hypertrophyassociated polymorphisms ascertained in a founder cohort applied to heart failure risk and mortality. Clin Transl Sci. 2011, 4: 1723. 10.1111/j.17528062.2010.00251.x.
 25.
Thornton T, McPeek MS: Case–control association testing with related individuals: a more powerful quasilikelihood score test. Am J Hum Genet. 2007, 81: 321337. 10.1086/519497.
Acknowledgments
MM. Xiong and Y. Zhu were supported by Grants 1R01AR057120 – 01, 1R01HL10603401, and 1U01HG00572801 from the National Institutes of Health. YY. Shugart and W. Guo were supported by the Intramural Research Program at the National Institute of Mental Health.
The views expressed in this presentation do not necessarily represent the views of the NIMH, NIH, HHS, or the United States Government.
The Framingham Heart Study is conducted and supported by the National Heart, Lung, and Blood Institute (NHLBI) in collaboration with Boston University (Contract No. N01HC25195). This manuscript was not prepared in collaboration with investigators of the Framingham Heart Study and does not necessarily reflect the opinions or views of the Framingham Heart Study, Boston University, or NHLBI. Funding for SHARe genotyping was provided by NHLBI Contract N02HL64278.
We would like to thank Drs. Andrew Collins and Sam Dickson, and Mr. Harold Wang for their critical reading of this manuscript.
Web Resources
Author information
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
YYS, MX, YZ and WG all contributed to the study design, analytical preparation, and simulation modeling. MX contributed to the derivations, YZ conducted all calculations of type I error rates and power. All four authors participated in strategic planning, concept development, revisions, and manuscript preparation. All authors read and approved the final manuscript.
Electronic supplementary material
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
About this article
Cite this article
Shugart, Y.Y., Zhu, Y., Guo, W. et al. Weighted pedigreebased statistics for testing the association of rare variants. BMC Genomics 13, 667 (2012) doi:10.1186/1471216413667
Received
Accepted
Published
DOI
Keywords
 Pedigree
 Nextgeneration sequencing
 GWAS
 Rare Variants
 Collapsing