- Research article
- Open Access
Finding the missing honey bee genes: lessons learned from a genome upgrade
BMC Genomics volume 15, Article number: 86 (2014)
The first generation of genome sequence assemblies and annotations have had a significant impact upon our understanding of the biology of the sequenced species, the phylogenetic relationships among species, the study of populations within and across species, and have informed the biology of humans. As only a few Metazoan genomes are approaching finished quality (human, mouse, fly and worm), there is room for improvement of most genome assemblies. The honey bee (Apis mellifera) genome, published in 2006, was noted for its bimodal GC content distribution that affected the quality of the assembly in some regions and for fewer genes in the initial gene set (OGSv1.0) compared to what would be expected based on other sequenced insect genomes.
Here, we report an improved honey bee genome assembly (Amel_4.5) with a new gene annotation set (OGSv3.2), and show that the honey bee genome contains a number of genes similar to that of other insect genomes, contrary to what was suggested in OGSv1.0. The new genome assembly is more contiguous and complete and the new gene set includes ~5000 more protein-coding genes, 50% more than previously reported. About 1/6 of the additional genes were due to improvements to the assembly, and the remaining were inferred based on new RNAseq and protein data.
Lessons learned from this genome upgrade have important implications for future genome sequencing projects. Furthermore, the improvements significantly enhance genomic resources for the honey bee, a key model for social behavior and essential to global ecology through pollination.
Honey bee, Apis mellifera, provides a key model for understanding the diverse and widespread group of social insects. Thanks, in part, to resources generated during the initial honey bee genome sequencing effort , honey bees are now widely used for elucidating the molecular basis of behavior , development , disease transmission , epigenomics  and gene regulation . Honey bees are also a vital pollinator of many of the world’s crops [7, 8], and genomic tools are being used to address recent serious and unexplained declines in some honeybee populations [9, 10]. In light of the current interest in honey bee genetics, improved genomic tools for this species are required.
Because fewer than 11,000 genes were predicted, one of the major questions coming out of the initial honey bee genome sequencing effort was, “Where are the missing genes?” Were there issues with the genome sequence that meant that the genes were filled with gaps and therefore not annotated? Or were the genes located in islands of repetitive sequence and therefore not identified? Were the gene prediction methods poorly adapted to a genome with a bimodal distribution in GC content? Or was the tuning of gene prediction algorithms to an average GC content failing to represent genes in regions of more extreme GC content? Was there insufficient mRNA evidence? Were the genes different enough from known genes that the prediction tools failed to find the genes due to lack of protein evidence? Or might the honey bee have thousands fewer genes than the few insects with sequenced genomes at the time?
All early genome sequencing projects used Sanger data and either a BAC-based hierarchical-sequencing model  or a whole-genome-shotgun model . In either case, a completed draft genome has contiguous sequence pieces (contigs) spaced by paired clone end sequences, forming scaffolds. Missing sequences between consecutive contigs are represented by segments of ambiguous bases, denoted as Ns, the lengths of estimated gap sizes. Few Metazoan genomes have been improved to finished quality by filling in the missing sequence [13–16]. The genome scaffolds, with islands of sequence information and lack of information (in a draft genome), are annotated with gene features using gene prediction methods. When gene signals such as splice sites, start codons and termination codons are missing from the assembly, a computational gene prediction tool may miss an exon or even an entire gene. Thus, gaps within genic regions of an assembly can hinder annotation and lead to an incomplete gene list.
The first A. mellifera genome sequencing project  revealed genome characteristics with potential missing assembly information that could impact the gene list. The genome assembly had the lowest mean GC content (percent of G + C nucleotides) and the most heterogeneous GC content of any sequenced metazoan genome at that time, with GC content ranging from 10% to 70% across the published genome assembly (Amel_4.0) . Analyses of initial assemblies showed that regions with low GC content were under-represented in libraries, so additional shotgun libraries were generated after fractionating DNA with CsCl-bisbenzimide density gradient centrifugation, and approximately 800,000 reads of <30% GC content were added to the data that lead to Amel_4.0 .
In addition to potentially missing assembly information, other factors including limited EST data and the large evolutionary distance between honey bee and other insects with sequenced genomes were thought to have contributed to difficulty in gene prediction. The 78,001 A. mellifera ESTs that were available at the time provided only 9,408 unique consensus sequence alignments to the genome . The closest organisms with available protein sets were the Dipterans, Drosophila melanogaster and Anopheles gambiae, with an estimated divergence time from honey bee (Hymenopteran) of 300 million years.
Honey bee researchers suspected that the first Official Gene Set (OGSv1.0), generated by creating a consensus gene set with GLEAN [1, 17], was incomplete, as it comprised only 10,157 genes, far fewer than expected based on the estimate of ~13,600 genes in D. melanogaster at the time. Recently sequenced Hymenoptera genomes (parasitoid wasp and seven ant species), predicted to contain ~17,000-18,500 protein-coding genes [18–24], further support the suspicion that a large number of A. mellifera genes had not yet been detected. Whole genome tiling arrays provided experimental evidence for missing genes, with the detection of signals “intergenic” to OGSv1.0 genes . Finally, evaluation of the genome-wide distribution of OGSv1.0 genes revealed another potential factor in computational gene prediction, which relied on algorithms optimized for gene and genome characteristics known at that time. Unlike any previously sequenced metazoan genome, OGSv1.0 genes occurred in gene regions that were more GC-poor (29% GC) than the mean genome GC content (33%), and were located in regions with GC content as low as 11% .
Genome sequencing and assembly methods have changed with the advent of next-generation sequencing technologies. Newer technologies typically produce shorter reads at greatly reduced cost and allow the completion of projects with much deeper sequence coverage using many more reads than a Sanger-based project. While contiguous sequence may suffer from these shorter reads that cannot span repetitive sequences, scaffolding can benefit from the increased mate-pair information. Furthermore, different sequencing technologies have different biases related to nucleotide composition, so combining technologies provides the potential for one technology to fill in gaps produced by another.
A bigger impact of the reduced sequencing cost of second-generation sequencing methods is the ability to generate much more transcript sequence than ever before. These transcript data are very useful as evidence supporting gene model prediction. As will be discussed below, the alignment of new transcriptome data provided evidence for most of the previously un-annotated genes in the honey bee genome.
This paper presents a de novo annotation of the A. mellifera genome based on an upgraded genome assembly and new transcript data. We generated additional genome sequence data using ABI SOLiD and Roche 454 paired-end sequencing technologies to superscaffold and fill gaps in the Amel_4.0 assembly using the Atlas-link software, creating the improved assembly (Amel_4.5). We also deep-sequenced the transcriptome of seven A. mellifera tissues and sequenced the genomes of two closely related species, the dwarf honey bee (A. florea) and buff-tailed bumble bee (Bombus terrestris) (both of which will be published elsewhere).
To avoid perpetuating errors in OGSv1.0 and avert difficulties in tracking genes between assemblies (e.g. reported in ), we chose not to track and update the previous annotation on the Amel_4.5 assembly. Instead we decided to annotate the Amel_4.5 assembly de novo and generate a new official gene set (OGSv3.2) and a new list of repetitive elements based on the most current evidence and methodologies. To learn which factors were most important in identifying previously unknown genes, and to inform potential strategies for future genome projects, we compared both gene sets and characterized genes that were missing from OGSv1.0.
Improvements to the genome assembly
Additional sequence coverage generated using the ABI SOLiD  technology (~20x) and Roche 454  technology (~4x) from small insert fragments (~2 k) was incorporated into Amel_4.5. The sequence data are summarized in Table 1 and Table S1 in Additional file 1 and are available from the NCBI Sequence Read Archive (SRA). We compared assembly statistics for Amel_4.5 with the previous assembly, Amel_4.0, which is described in  and is the assembly used by the research community since 2006. The genome assembly improvements increased the contig N50 from 40 kb to 46 kb and the scaffold N50 from 359 kb to 997 kb, with an additional 5.5% of the sequence anchored to linkage groups (Table 2).
The completeness (extent of coverage of the genome) of the new Amel_4.5 and the earlier, Amel_4.0, assemblies were measured by BLASTN comparison to available de novo assembled 454 contigs from seven libraries. Amel_4.5 showed slightly more complete coverage than Amel_4.0 (88.7% vs. 88.2%; Table 3).
As hoped, the new sequence data had a large impact on the regions of the genome that were of low starting quality. While the new sequence did not specifically target the GC-poor regions of the genome that were underrepresented in the initial Sanger libraries, the sequence reads were more evenly distributed across the regions of different GC contents (Figure 1). A segmentation analysis of Amel_4.5 to identify GC compositional domains that are homogenous in GC content within domains, but different in GC content across domain boundaries, showed that the genomic proportion of compositional domains low in GC content increased in Amel_4.5 (Figure 2). As a consequence, many newly discovered genes were annotated in GC poor regions (Figure 2).
Generating and assessing a New official gene Set
Testing combined gene set approaches
We tested two approaches, MAKER2  and GLEAN , for combining outputs from multiple gene prediction tools to create an Official Gene Set (OGS). Each approach has advantages and disadvantages. An advantage of MAKER2 is that given sufficient transcript data, it can predict multiple alternative splice forms per locus, while GLEAN computes only one gene model per locus. MAKER2 provides both a conservative biological sequence (transcript and homolog) alignment-based set of gene models that best agree with transcript and protein homolog alignments, and a set of ab initio gene predictions that do not overlap the biological sequence alignment-based set.
The final set of MAKER2 biological sequence alignment-based gene set contained 12,268 genes, encoding 12,575 transcripts, with an additional set of 31,047 ab initio gene predictions that did not have support from transcript or protein alignments. Without filtering the ab initio set for likely false positives, the choices of final gene sets generated with MAKER2 would have been 1) a conservative set of only 12,268 genes, still much lower than gene numbers found in other sequenced insect genomes or 2) a set of 43,315 genes that included ab initio gene models. Other hymenoptera genome projects using MAKER have selected ab initio gene models with matches to InterPro domains  to include in the final predicted gene set [20–22]. This approach would allow us to add 1,215 MAKER2 ab initio genes to the final predicted gene set, for a total of 13,303 genes. However, since only 8,602 of the 12,268 MAKER2 biological sequence alignment-based genes had InterPro matches, we were concerned that the InterPro approach to boost ab initio genes to the final gene set would miss some rapidly diverging genes.
An important difference between GLEAN and MAKER2 is the way ab initio predictions without biological sequence evidence are handled. GLEAN collects evidence for genes (ab initio gene predictions and biological sequence alignment-based), generates maximum likelihood estimates of accuracy and error rates for these signals for each gene prediction set, constructs consensus gene models that maximize the scores for the signal sites in each gene model, and labels each model with a probabilistic confidence score reflecting the underlying support for that gene model . In addition to identifying consensus models supported by transcript and protein alignments, GLEAN identifies ab initio predictions with high computed probabilities, filtering out likely false positive ab initio predictions. This approach would not require filtering ab initio predictions using an InterPro search, and would potentially include high confidence ab initio predictions that are true, rapidly diverging genes without significant InterPro domain matches.
Since GLEAN weighs different sources of gene prediction evidence based on agreement among sources, without a priori information on the quality of individual input gene prediction sets, the choice of input datasets impacts the results. Evaluating GLEAN runs with different combinations of input sets allowed us to determine the optimum selection of datasets. We ran GLEAN 32 times with different combinations of input sets, and resulting GLEAN sets ranged in size from in 10,403 (with three input gene sets) to 17,724 genes (with seven input gene sets), (Additional file 2). In some cases, GLEAN predicted a larger number of genes than the MAKER2 set supported by either biological sequence alignment or InterPro. Although GLEAN generates only one transcript per gene locus, we decided to use GLEAN to create the OGS, because we prioritized GLEAN’s potential identification of a more comprehensive set of gene loci over MAKER2’s identification of 307 alternative transcripts. Since with GLEAN we did not need to filter ab initio genes based on InterPro, it might allow the genome-conservation-based N-SCAN dataset to provide support for other ab initio predictions even without detectable conservation with known InterPro domains. Another consideration was that assembly methods for Illumina RNASeq were not well established. We were concerned about the possibility of merging genes or missing introns due to potential genomic contamination in RNASeq experiments. GLEAN uses transcript alignments to support splice predictions, but does not merge or split genes based on transcript alignments, while MAKER2 creates gene models that best agree with transcript alignments, and works best with highly reliable transcript assemblies.
Selecting an official gene set
We evaluated the 32 GLEAN sets based on several criteria, including overlap with a conservative evidence-based set (RefSeq), transcript sequences, peptides and the CEGMA  conserved core set (Additional file 2). No single gene set was optimal with respect to all criteria. We chose to rank sets based on number of peptide matches, which would prioritize completeness of a protein-coding gene set rather than correctness of gene structure.
Assessing the new official gene set
The selected GLEAN set, OGSv3.2 (GLEAN31 in Additional file 2), represented a significant improvement because it included 15,314 protein-coding genes, which is 5,157 more genes than the first official gene set, OGSv1.0. The proportion of genes on placed scaffolds as well as those with expressed sequence coverage also increased over OGSv1.0 (Table 4). Since GLEAN predicts only coding exons, but not untranslated regions (UTRs), we used MAKER2  to add UTR to the final GLEAN gene predictions. Out of a total of 15,314 OGSv3.2 genes, UTR were added to 7,514 genes (49%).
Many split and merged gene models were noted when comparing the 32 GLEAN sets, including OGSv3.2, to the conservative RefSeq gene set (Additional file 2). Since it is difficult to computationally resolve disagreements among gene sets, the OGSv3.2 genes in question are provided as a separate track on the BeeBase Amel_4.5 genome browser . Web Apollo  annotation tools allow registered BeeBase users to modify gene models, and can be used to manually correct split or merged genes .
To address the question of whether the increased gene number was due to splitting genes, we looked at the total number of coding nucleotides (nt) and the distribution of coding sequence lengths in OGSv1.0 and OGSv3.2. The ranges in coding sequence lengths were 24-53,649 and 75-70,263 nt for OGSv1.0 and OGSv3.2, respectively. Note that the gene prediction parameters did not allow coding sequences less than 75 nt for OGSv3.2, but a minimum coding sequence parameter was not applied in the generation of OGSv1.0; however there were only 6 OGSv1.0 genes less than 75 nt. The OGSv3.2 gene with the largest coding sequence overlapped a single RefSeq gene prediction (XM_623650.3), and was found to be homologous to genes predicted to code for titin. The total number of coding nucleotides increased from 16,484,776 in OGSv1.0 to 19,342,383 in OGSv3.2. The increase in coding nucleotides by only 2,857,607 (17.3%) compared to a 50.8% increase in the number of genes suggested that new genes were shorter and possibly a result of splitting OGSv1.0 gene models. However, the distribution of coding sequence length in the two gene sets suggested that splitting genes was not the major source of the increased gene number (Figure 3). Although OGSv3.2 possessed a large number of short coding sequences (< ~1.5 kb) compared to OGSv1.0, the larger genes did not appear to be missing. Furthermore, analyzing overlapping gene alignments (described below), showed that 4,735 of the OGSv3.2 genes did not overlap with genes in OGSv1.0, and thus were not likely to be a result of splitting OGSv1.0 genes.
Biological evidence for the new official gene set
In assessing the gene set, we define biological evidence to include biological sequence alignments used in gene prediction pipelines (transcript, peptide, protein homolog) as well as matches to InterPro domains and alignment to other bee genomes. We define biological gene evidence as all of the datasets considered as biological evidence, except alignment to other bee genomes, since we did not use information about genes or expression for the other bee genomes. Some form of biological gene evidence supported the majority (14,084, 92%) of the OGSv3.2 genes. An additional 754 (4.9%) OGSv3.2 genes aligned to either the Apis florea or Bombus terrestris genome for a total of 14,836 (96.9%) of the OGSv3.2 genes with biological support. Requiring that transcripts be spliced reduces the number of supported genes to 13,264 (86.8%) or 14,661 (95.7%) if alignment of the gene to another bee genome is considered as support.
Identification and characterization of New genes
Identifying new genes due to improved assembly or improved gene prediction
In order to compare the old and new OGS (OGSv1.0 and OGSv3.2), we mapped OGSv3.2 coding sequences to the Amel_2.0 assembly because it was the assembly used to predict OGSv1.0 genes , which were later mapped to Amel_4.0. We chose to use Amel_2.0 in this step, because generation of Amel_4.0 and intermediate assemblies had involved rearranging and splitting scaffolds and incorporating unscaffolded contigs using an updated genetic map . We wished to minimize mapping errors in our comparison of gene sets by using Amel_2.0 to determine which OGSv3.2 genes correspond to OGSv1.0 genes.
We performed the mapping twice using different alignment criteria, stringent (95% identity and 80% alignment coverage) and relaxed (95% identity and 50% alignment coverage). We will report results only for the stringent criteria (Table 5) unless otherwise specified, but have provided the relaxed mapping results in Table S2 in Additional file 1. On the basis of mapping to Amel_2.0 and overlap between the OGSv3.2 coding sequence alignments with OGSv1.0 gene models, we divided the 15,314 OGSv3.2 genes into three sub-sets (Table 5). Any OGSv3.2 gene that did not align to the Amel_2.0 assembly we deemed a “Type I New” gene. Any OGSv3.2 gene that aligned to the Amel_2.0 assembly, but whose coordinates did not overlap an OGSv1.0 gene by a single coding base pair on the same strand, we deemed a “Type II New” gene. Finally, any OGSv3.2 gene that both aligned to the Amel_2.0 assembly and overlapped an OGSv1.0 gene we deemed a “Previously Known” gene.
Of the 5,157 additional genes in OGSv3.2 compared to OGSv1.0, 4,735 genes did not overlap OGSv1.0 genes. The other 422 additional genes in OGSv3.2 were due to either splitting OGSv1.0 genes (discussed above) or to the annotation of additional recent paralogs in OGSv3.2, and are included in the total count of 10579 Previously Known genes. The 4735 genes that did not overlap with OGSv1.0 genes could be classified as 782 genes discovered due to the additional sequencing and reassembly of the bee genome for the Amel_4.5 assembly (Type I New genes; Table 5) and 3,953 genes detected by improved gene prediction, either through the use of new expressed sequence and protein data or improved gene prediction algorithms (Type II New genes; Table 5). We could map 405 additional Type I New genes to the Amel_2.0 assembly if we required only 50% of the gene to be covered (Table S2 in Additional file 1), rather than the more stringent 80% gene coverage reported in Table 5, consistent with the Amel_2.0 assembly being less continuous than Amel_4.5. This lack of contiguity and resulting fragmentation of genes in the Amel_2.0 assembly likely impaired the initial gene prediction efforts. While the frequency of genes with some form of biological support (transcript, peptide, protein homolog, InterPro domain, and/or alignment to another bee genome) was highest for Previously Known genes (99.7%), most of the Type I New genes (93.8%) and Type II New genes (89.9%) were also supported (Table 5).
Characteristics of new genes
We analyzed the data that went into the annotation of OGSv3.2 and evaluated which pieces of evidence contributed to the prediction of the genes to understand why they were missed in OGSv1.0. To determine whether genes that were not detected in OGSv1.0 have common characteristics that make them more challenging to predict, we compared them to the Previously Known genes. We evaluated features such as tissue expression specificity, coding feature length, GC content, overlap of protein homolog alignments on Amel_4.5 and the proportion of non-canonical splice sites. Additional file 3 provides sources of evidence for each OGSv3.2 gene.
The mean coding sequence lengths of Type I New (1,172 bp) and Type II New genes (331 bp) were shorter than that of Previously Known genes (1,623 bp) (P = 2.3 × 10-12 and P < 2.2 × 10-16 respectively) (Table 5). This difference may be due to a higher fraction of single coding exon genes among new genes. Thirteen percent of Type I New genes and 31% of Type II New genes contained one coding exon, while only 6.8% of Previously Known genes contained one coding exon (P < 2.805 × 10-10 and P < 2.2 × 10-16 for Type I and Type II genes, respectively) (Table 5). The number of canonical versus non-canonical splice sites was not significantly different between the Previously Known and Type II New genes (Table S3 in Additional file 1).
Type I New genes were found to reside in GC compositional domains with mean 26.4% GC, significantly lower than that of Previously Known genes (28.9%) (P = 2.188 × 10-13), supporting improvement in the assembly of the high-AT-content regions. On the other hand, Type II New genes were found in GC compositional domains with a mean GC content of 32.0%, higher than that of than Previously Known genes (P < 2.2 × 10-16), but still slightly lower than the mean GC content of the genome (32.7%)
The effective number of codons is an estimate of the deviation from equality of synonymous codon usage of all codons of a gene, and ranges from 20 (extreme bias where only one codon is used for each amino acid) to 61 (no bias, all synonymous codons are used equally) . Type I New genes had a significantly lower mean effective number of codons than Previously Known genes, 41.97 vs. 44.90 respectively (P = 2.26 × 10-12) (Table 5). This is consistent with the idea that the more extreme the deviation from equal proportions of G + C and A + T nucleotides in coding sequences, the lower the potential diversity of synonymous codons. Consistent with their locations in less extreme GC compositional domains, Type II New genes had a significantly higher mean ENC than the Previously Known genes, 45.69 vs. 44.90 respectively (P = 3.923 × 10-05) (Table 5).
Expression evidence for new genes
The majority of OGSv3.2 genes were supported by transcript evidence. When combined, the spliced and un-spliced transcript alignments overlapped 13,517 (88.3%) of OGSv3.2 genes. An analysis of OGSv3.2 gene coverage by transcript dataset (Table S4 in Additional file 1) showed that the fraction of genes represented in a transcript dataset ranged from 28.3% (both larvae and testes) to 79.2% (forager brain) (Table S4 in Additional file 1). Both Type I New (79.5%, 622) and Type II New (53.4%, 2110) genes were less likely to overlap a spliced transcript alignment than Previously Known genes (89.2%, 9,440) (P = 3.298 × 10-16 and P < 2.2 × 10-16, respectively) (Table 5).
Compared to Previously Known genes both Type I New and Type II New genes were more likely to be narrowly expressed or overlap transcript alignments from only one tissue (P = 2.136 × 10-14 and P < 2.2 × 10-16,, respectively) 18.7% of Previously Known, 29.9% of Type I New and 28.8% of Type II New were narrowly expressed (Table 5). Conversely, Previously Known genes (20.5%, 2,171) were more likely to be broadly expressed or overlap transcript alignments from all tissues than either Type I New or Type II New genes (P < 2.2 × 10-16 for both tests). 20.5% of Previously Known, 7.7% of Type I New and 2.4% of Type II New genes overlapped transcript alignments from all tissues. However, the fractions of narrowly expressed (18.7%) and broadly expressed (20.5%) genes were similar to each other for Previously Known genes.
Homolog alignment evidence for new genes
Results suggested that the use of dipteran proteins as the main source of protein homolog evidence for OGSv1.0 may have been a contributing factor to an incomplete gene set; 44.3% of the OGSv3.2 genes overlapped at least one protein homolog alignment, but only 7.9% overlapped an alignment of a D. melanogaster protein (Table 5). Differences among gene sets further supports the limited value of Dipteran proteins as a primary source of homolog evidence for A. mellifera gene prediction. Both Type I New and Type II New genes were less likely than Previously Known genes to overlap a D. melanogaster homolog alignment (P = 1.394 × 10-07 and P < 2.2 × 10-16, respectively). The effect was more drastic for Type II New genes; only 0.3% of Type II New genes overlapped a D. melanogaster homolog alignment, while the proportions were 4.9% and 10.9% for Type I New and Previously Known genes, respectively.
Both Type I New and Type II New genes were less likely than Previously Known genes to overlap any homolog alignment from another sequenced genome (P < 2.2 × 10-16 for both tests), but the difference was more extreme for Type II New genes, potentially implying that a greater number of the Type II New genes are specific to either A. mellifera, bees, or Hymenoptera than the Previously Known genes (Table 5). 59.8% of Previously Known genes overlapped a homolog alignment, while only 34.5% and 4.7% of Type I and Type II new genes, respectively, overlapped a homolog alignment (Table 5).
Genome alignment evidence for new genes
Over 80% of the OGSv3.2 genes aligned to both the Aflo_1.0 and Bter_1.0 genome assemblies (Table 5). A notable difference between Type II New genes and the other gene sets was the proportion of genes that were supported by genome conservation, but not other sources of evidence. Of the 3,555 Type II New genes supported by any evidence, 17.5% were not supported by other sources. On the other hand, only 2.9% of supported Type I New genes and 1% of supported Previously Known genes were supported by only genome conservation.
The remaining 20% of the OGSv3.2 genes have the potential to be Apis-specific (8% of genes that align to Aflo_1.0, but not Bter_1.0) or A. mellifera specific (12% of OGSv3.2 genes that do not align to Aflo_1.0) (Table 5).
Use of peptide evidence
Peptide data were used in four ways. First, peptide data were used in gene prediction by AUGUSTUS, the only program used in this study that accepts this source of gene evidence. Second, peptides were compared to all consensus gene prediction sets to identify the set with the highest representation of peptides (described above; Additional file 2). Third, peptide support was used in characterizing Previously Known, Type I and Type II New genes. Fourth, venom peptides were used to manually annotate venom genes associated with the sting of the honey bee.
Gene set comparison with all peptides
Peptide sequences aligned to a greater number of Previously Known genes than to Type I or Type II New genes (P < 2.2 × 10-16 for both tests). Peptides aligned to 32% of the Previously Known genes, but to only 17% of Type I and 2% of Type II New genes (Table 5 and Additional file 3).
Venom peptide analysis
Despite the lower proportion of new genes compared to Previously Known genes with peptide matches, analysis of venom peptides (a subset of the peptide data) showed that the Amel_4.5 assembly provides a significant contribution to venom proteome research. 705 unique venom peptides provided biological evidence for 102 genes (described in ). Searching the venom mass spectra against OGSv1.0 and OGSv3.2 showed that the improved assembly allowed detection of 21 additional peptides supporting 9 new venom protein identifications in OGSv3.2 (Additional file 4). Additional tryptic peptides were discovered for 7 venom proteins as a result of improved gene predictions (Additional file 4).
Manual annotation of genes supported by the venom peptides (Additional file 5) using Apollo  showed that most honey bee venom genes are fully (76.5%) or partially (19.6%) covered by transcriptome evidence. The putative biological functions of these genes are described elsewhere . We discovered that one of the annotated genes (GB40695) codes for tertiapin. While the tertiapin peptide was already found in bee venom , no genomic or transcriptomic evidence had been described, an issue which is now solved as the genome improvement project supplies both a gene prediction (GB40695, NCBI Gene ID 100576769) and EST evidence (Genbank:HP466647.1). The gene is positioned on linkage group 12, next to the apamin and mast cell degranulating peptide venom genes. The three genes are tandemly arranged which suggest their origin by gene duplication via unequal crossing over, and may also point to a joint control of transcription .
Analysis of two different A. mellifera gene sets in comparison to genes from other insects allowed us to investigate the impact of the new genome and gene annotations on the numbers of A. mellifera genes in near-universal orthologous groups. Although true gene losses can and do occur, these near-universal insect orthologous groups highlight possible missed gene annotations in each species.
Numbers of orthologs were counted for each of the two sets, V2 (similar to OGSv1.0, described in Methods) and OGSv3.2. Figure 4 and Table S5 in Additional file 1 show the near-universal orthologs missing in each genome. The pea aphid (Acyrthosiphon pisum) was found to be missing more orthologous groups than the other insects. The A. mellifera V2 annotation was average for the genomes analyzed (missing 263 orthologs), but the OGSv3.2 annotation was much more complete, missing fewer orthologs (112) than the other genomes. Thus, the new gene set OGSv3.2 reduced the total number of potentially missing orthologs in A. mellifera by 57%, demonstrating the annotation improvement that recovered more “universal” insect orthologs than the previous one did.
Predicted gene functions
Gene ontology analysis
Gene Ontology analysis (Additional file 6) showed enrichment of some specific functions in new genes. Type I New genes were enriched for the biological processes “apoptosis” (corrected e-score = .0016), “neurotransmitter release” (corrected e-score = .0025), and “secondary active organic cation transmembrane transporter” (corrected e-score < .0001). The detection of these Type I New genes due to new assembly data is likely due to their location in low GC content regions, which were underrepresented in the older assembly; this is in agreement with the lower mean GC content of GC compositional domains containing Type I New genes. Type II new genes were enriched for the molecular function “nuclease activity” (corrected e-score = .011). Rapidly evolving and single exon genes are more difficult to annotate automatically, so it is perhaps not surprising that we found significant differences in some activities.
Comparison of InterPro protein domains found in OGSv3.2 and OGSv1.0 proteins showed that 269 of the InterPro domains present in OGSv3.2 were not present in OGSv1.0 (Additional file 7). There were also significant differences in the fraction of genes with the domains IPR004117 (Olfactory receptor, Drosophila, p < .02) and IPR001888 (Transposase, type 1; p < .01). There were 141 and 92 genes with olfactory receptor domains in OGSv3.2 and OGSv1.0, respectively. Olfactory receptor genes contain a single olfactory receptor domain, so the domain count corresponds to the gene count. The additional olfactory receptor genes were found among both the Type I and Type II New genes. The family of olfactory receptor genes is expanded in hymenopteran insects, with rapidly diverging family members that are often arranged in tandem arrays [20, 21, 39]. Many of the 166 known A. mellifera olfactory receptor genes were identified by manual annotation of the previous assembly, because they were not found in OGSv1.0 [20, 21, 39]. Improved computational prediction of olfactory receptors in the new assembly was likely due to increased assembly continuity which would improve identification of tandemly repeated genes, and new sources of biological sequence alignment evidence (e.g. transcript and protein homolog sequences) which improve identification of rapidly diverging genes.
There were 18 and 3 genes with transposase type 1 domains in OGSv3.2 and OGSv1.0, respectively. Thirteen of the additional transposase type 1domains were in Type 1 New genes. Transposases are associated with transposable elements, which are a class of interspersed repeats. Since the new assembly information filled in gaps, and gaps in de novo assemblies are found where the assembly process fails to find an unambiguous path (e.g. repetitive loci), we were not surprised to identify InterPro domains associated with repetitive sequences among the Type I New genes. Predicted genes with matches to transposable element domains are often removed from gene sets. We further investigated OGSv3.2 for presence of interspersed repeats, and decided not to remove the small number of genes associated with transposable element domains, because evidence suggested that some were real host genes (see Genome-wide repeat analysis).
Genome-wide repeat analysis
Processing the Amel_4.5 assembly with the REPET pipeline yielded 2,401 de novo predicted repetitive elements, of which 1,045 were validated by annotation of at least one complete copy. In total 9.46% (22.13 Mb) of the genome appears to be repetitive (Table 6). Non-interspersed repeats (SSR, low complexity, satellite) accounted for 4.05% (9.49 Mb), whereas interspersed repeats represented 5.07% (12.69 Mb) of the Amel_4.5 assembly. The latter estimate for transposable elements is similar to a previous estimate of 3% , whereby only Mariner and R2 elements were reported. Thus the honey bee remains a species with an unusually low amount of repetitive DNA.
Most of the groups of retrotransposable elements were detected in the genome of the honey bee. In comparison to many other organisms, the most striking difference is the extremely low diversity and abundance of these elements. LTR retrotransposons accounted for only 0.02% of the genome (49.6 kb) and included examples from only one Copia and a putative, unclassified element. Only fragments of elements from the BelPao and Gypsy superfamily were found. The DIRS group was represented by two incomplete elements and accounted for 0.01% of the genome (12.5 kb). LINEs accounted for only 0.04% of the genome (83.1 kb), and were represented by only two R2 elements, one I (nimbus) element, and a few fragments, potentially belonging to I (R1) and Jockey (CR1). Of the SINE elements detected, 14 could not be classified and five had similarities to SINEs of the 5S type, all representing 0.03% of the genome (70 kb). Together with another unclassified element, all class I retroelements summed up to only 224 kb (0.09%) of the genome, among the lowest in the animal kingdom. TRIMs (terminal repeat retrotransposons in miniature)  and LARDs (large retrotransposon derivatives)  are derivatives of retroelements and were detected in larger number occupying 9.57 Mb (4.09%) of the genome (Table 6).
Class II DNA transposons were more frequent and accounted for 0.57% of the genome (1.34 Mb). The vast majority of the elements were TIR (terminal inverted repeat) transposons of the Mariner superfamily (0.49%, 1.15 Mb). Otherwise only two elements of the PiggyBac superfamily (0.04%, 88 kb) and five unclassified TIR elements could be detected. Other types of DNA transposons, Crypton, Maverick and Helitron could not be found. The DNA transposon derivatives, MITES (miniature inverted transposable elements), were found only once and accounted for less than 0.01% of the genome (3.8 kb) (Table 6).
Besides the well-classified sequences, many repetitive elements could not be assigned to a superfamily or even class. The latter includes a larger number of elements (0.65%, 1.52 Mb), which could represent novel types, but need further investigation. We separately annotated and excluded from the transposable element counts elements that could not be categorized and elements without typical transposable element features that contained profiles from protein coding genes. Both together comprise 2.96% (6.93 Mb) of the genome (Table 6).
The detected elements of the R2 and the majority of those of the Mariner type belonged to or were very similar to previously described elements from A. mellifera or other insects (RepBase v17.01, ). A few other Mariner and the PiggyBac elements showed similarities to elements known from distant animal species. This indicates a potential horizontal gene transfer as previously suggested .
Most of the elements appeared to be fragmented and incomplete. Although some contained sequences of typical transposable element protein domains, they seemed to be inactive due to stop codons and frameshift mutations. We detected only four retrotransposons and 27 DNA transposons with RT (reverse transcriptase) or Tase (transposase) domains, respectively. None of the retrotransposons appeared to possess an active ORF containing an entire RT domain, so we classified them as inactive. Among the DNA transposons, six of the Mariners appeared to be complete and two were potentially active. Five additional Mariner elements possessed an intact ORF spanning at least parts of a Tase domain, so they might have limited activity. The higher abundance and higher number of chimeric inserts of Mariners (Table 6) suggests that transposons were more recently active than retrotransposons.
Repeats associated with the official gene set
Since gene annotation had been performed on an assembly that was masked for repeats early in the project, prior to the availability of results from the genome-wide repeat analysis, we expected some OGS genes to overlap newly-detected repeats due to incomplete masking. Coding sequences of 1,234 genes overlapped interspersed repeats detected by REPET. These genes were further investigated for characteristics that would support their annotation as host genes, including whether the gene was Previously Known, had multiple coding exons, overlapped a spliced transcript alignment, and had InterPro domain matches (Additional file 8). Of these 1,234 REPET-overlapping genes, 739 were classified as Previously Known, 185 as Type I New genes, and 310 as Type II New genes. 1,040 of the REPET-overlapping genes had multiple exons and 972 overlapped spliced transcript alignments.
Inspecting InterPro results to identify protein domains known to be associated with transposable elements, but not host genes, resulted in the following list of domains: DDE superfamily endonuclease; Integrase, catalytic core; Reverse transcriptase, RNA-dependent DNA polymerase; Retrotransposon, Pao; Ribonuclease H domain; Ribonuclease H-like domain; Transposase, Tc1-like; Transposase, type 1; Transposase, Synechocystis PCC 6803. Of the 760 REPET-overlapping genes that had InterPro matches, only 35 matched one of these transposable element domains. Some protein domains, such as zinc fingers, peptidases and helicases, are similar between host genes and transposable elements, so cannot be used to classify genes as transposable elements. Among the genes that matched non-transposable element domains were some known to be members of large gene families, such as olfactory receptors, and genes with repetitive domains, such as ankyrin repeat-containing domains. We were not surprised that these would be included in a set of de novo detected repeats.
Of the 35 genes with transposable element domain matches, 13 had other domains suggesting they could be host genes, and 28 overlapped spliced transcript alignments. Only four genes with either transposable element or unknown/uncharacterized domain family matches lacked evidence of being a host gene. That is these four genes had a single coding exon, lacked spliced transcript overlap and had no other InterPro domain match. We chose not to remove from the OGS genes that overlapped repeats detected by REPET or genes that matched InterPro transposable element domains, because of evidence supporting a large number of them as host genes, and the possibility that transposable elements may have contributed to the evolution of some host genes (e.g. reviewed in ).
In the approximately seven years that have elapsed between generation of OGSv1.0 and OGSv3.2, new sequence was added to the assembly; new sequencing technologies, genome assembly methods and gene prediction methods were applied; and new sources of gene prediction evidence became available. Several lines of evidence indicate that the new assembly is more complete. These include improved continuity of scaffolds, increased coverage of low GC content regions of the genome, identification of 782 new genes that do not align to the older assembly, and increased number of detectable repetitive elements. The upgraded assembly allowed us to conduct a comprehensive analysis of repetitive elements in the genome, create an improved gene set and confirm previous findings related to GC composition. It also allowed us to confirm that low amounts of transposable elements and repetitive DNA are bona fide features of the honey bee genome, and not artifacts of incomplete assembly and annotation.
Transposable elements can be a major factor in genome and gene evolution. Previous analyses found a low number of transposons and retrotransposons in the assembled genome compared to other sequenced insect genomes , but researchers questioned whether additional elements were present in unassembled portions of the genome. The upgraded assembly allowed us to better characterize repetitive elements in the genome. Despite a more comprehensive repetitive element annotation, the genomic coverage of transposable elements was extremely low, most striking for the retrotransposons, in agreement with the previous analyses. The most apparent difference between A. mellifera and other hymenopteran insects is the relative lack of retrotransposable elements; genomes of other bee, wasp, ant and insect species all contain higher proportions [22, 23, 45]. Although comparisons across studies are difficult due to methodological differences, our results show that the total fraction of repetitive DNA in the A. mellifera genome (9.46%) is lower than that of most other sequenced hymenoptera genomes. Some of the ant genomes have more than twice as much repetitive DNA (Atta cephalotes, 25%, Linepithema humile 23.5%, Acromyrmex echinator 27%, Harpegnathos saltator 27%, Solenopsis invicta >23%) and the genome of the parasitoid wasp, Nasonia vitripennis, contains more than three times the amount (>30%) [18–20, 22–24]. The ants Camponotus floridanus and Pogonomyrmex barbatus are more similar to A. mellifera, with estimates of 15% and 9%, respectively [18, 21]. However, those analyses did not include LARD, TRIM and MITE elements, which make up a considerable fraction of the repetitive elements in A. mellifera (4.1% of the genome; 43.3% of the repetitive DNA). Without these derivative elements, A. mellifera would possess well less than 1% transposable elements. This extraordinarily low proportion of mobile elements suggests that evolutionary processes molding the A. mellifera genome differ from processes working on other hymenopteran genomes, even though many of the species listed above are also insects with eusocial lifestyles.
Combined with new biological evidence for gene predictions, the upgraded assembly allowed for significant improvement to the A. mellifera gene set, with >50% more genes. The identification of 269 additional InterPro domains and the 57% reduction in number of missing universal insect orthologs indicate a more comprehensive catalog of protein functions. The presence of nine new venom protein genes, the detection of new tryptic peptides in existing venom protein genes, and the 53% increase in the number of computationally identified olfactory receptor domains are examples of more comprehensive annotation of specific gene families important to bee biology enabled by the improved genome.
The previously described A. mellifera genome characteristics of low and heterogeneous GC content  remain after the addition of new sequence to the assembly. Expansion and improvement of the low GC content regions in the new Amel_4.5 assembly was supported by the identification of Type I New genes, which were found in regions of lower GC content than that of Previously Known genes. While it is impossible to know whether new gene prediction evidence (transcript, peptide, homolog, genome conservation) affected the ability to predict the Type I New genes, the identification of Type II New genes in regions with slightly higher GC content than Previously Known genes suggested that the addition of new gene evidence had a greater impact on gene prediction in higher GC regions. Although any single evidence type was less frequent in the Type II New genes, the total number of Type II New genes supported by the evidence (3,555) was higher than that of Type I New genes (734). Higher recombination rates  and rates of molecular evolution in high GC content regions of the A. mellifera genome  may have contributed to sequence divergence that made Type II New genes difficult to detect when generating OGSv1.0. High GC content regions have been shown to be enriched in genes associated with behavioral traits , suggesting that some Type II New genes may be associated with important bee-specific traits.
Despite the higher mean GC content of regions containing Type II New genes, the strong bias for A. mellifera genes to reside in low GC content regions relative to the genome  remains. Among the wide range of insect genomes we have examined thus far, only the hymenopterans A. mellifera and H. saltator show a strong bias for genes to occur in compositional domains with low GC content, although S. invicta, P. barbatus, L. humile and N. vitripennis show a slight bias . The biological meaning of this, and whether this is related to the lifestyles of these hymenopterans, is still unclear.
Comparisons of the old and new gene sets suggested that short and single coding exon genes, with spatially- or temporally-restricted expression patterns and low protein homology remain difficult genes to predict. Compared with Previously Known genes, Type II New genes were more rarely and narrowly expressed, had shorter coding sequences, were more likely to be single coding exon genes, and were less likely to have detectable homologs. The characteristics of Type II New genes were consistent with those of new genes identified in the modEncode effort to reannotate the developmental transcriptome of Drosophila melanogaster . Their “new transcribed regions” (NTRs) in Drosophila also had low expression levels with temporally restricted patterns. In addition more than half of these NTRs were single-exon genes, and the multi-exon NTRs were shorter and less conserved than previously annotated genes . While difficulty in computational identification of functional small open-reading frames (smORFs; <100 codons) has led to their low representation in genome annotations, increasing evidence supports functional smORFs in eukaryotes [50, 51].
Efficient and effective annotation methods for non-model organisms has become critical in a time when initiatives such as i5K (5000 insect genomes ) and G10K (10,000 animal genomes ) motivate scientists to investigate genomes of diverse organisms, many of which will be evolutionarily distant from existing model organisms. Our results suggest that investigators wishing to comprehensively annotate protein-coding genes in genomes of non-model organisms should invest in transcriptome sequencing that is both deep and broad, similar to findings in re-annotation of the green anole lizard (Anolis carolinensis) genome . Type II New genes were more likely to be narrowly expressed, so transcript evidence from only a single tissue may have missed a high proportion of the expressed genes. Transcriptome sequence from multiple tissues, life stages and conditions may be more useful than protein homolog evidence; the number of Type II New genes with transcript evidence exceeded the number of those with protein homolog evidence, despite the relatively close evolutionary distance between A. mellifera and some of the reference species, which included six species within the order Hymenoptera. Even with sampling many transcriptomes, rarely expressed genes can be missed, and genomic sequence from closely related species can aid gene prediction by leveraging nucleotide sequence conservation; our analysis showed that 752 of the OGSv3.2 genes were supported by genome conservation as their only source of biological evidence. As more genomes are sequenced and annotated, gene prediction should become easier. When expression and homolog evidence are lacking, it is important to train ab initio prediction algorithms using genes representing the true distribution of gene features such as coding sequence and exon length, codon usage and GC content. Our analysis of Type I and Type II New genes suggests that the bimodal distribution of genome GC content in A. mellifera results in at least two classes of genes distinguished by different distributions of GC content and codon usage. Ab initio gene predictors may benefit by training with coding sequences from each class separately.
We have shown that next generation sequencing followed by de novo annotation can substantially improve an unfinished first generation genome sequence assembly and annotation. The upgraded assembly and annotation allowed us to confirm that the honey bee genome contains a typical number of genes relative to other insects. The improved honey bee gene set will be invaluable to the honey bee research community in efforts to elucidate the mechanisms behind fundamental biological processes, such as evolution of insect eusociality, as well as agricultural issues, such as pollinator health and immunity. Furthermore, understanding the reasons genes were not predicted in OGSv1.0 will lead to more effective gene prediction strategies for new genome projects.
Genome sequencing and assembly
We improved the published genome assembly of 2.7 million Sanger reads of the honey bee genome, version Amel_4.0  by incorporating ABI Solid sequence and Roche 454 paired-end sequence to superscaffold and gap-fill the Amel_4.0 assembly using the Atlas-Link software . The new sequence data as well as the existing sequence data were used to link the genome contigs from Amel_4.0 into more contiguous scaffolds. Adjacent contig sequences within these scaffolds were assessed and overlapping and redundant contigs were merged.
We used the paired-end reads for superscaffolding and intra-scaffold gap filling. The Amel_4.5 assembly contains new scaffolds formed from merging existing scaffolds and filling some intra-scaffold gaps with other scaffolds or contigs.
The newly formed scaffolds were anchored to the same linkage group that their member contigs were anchored to in Amel_4.0. Ten of the new scaffolds could be anchored to two different linkage groups so a manual break was inserted to split these scaffolds for consistent anchoring.
New data for gene prediction
We sequenced samples from a number of tissues using the 454 Titanium technology. Tissues from ovary, testes, mixed antennae (worker, drones, and queens), larvae, mixed embryos, abdomen, and a combined library from brain and ovary samples were sequenced.
The testes cDNA library was prepared with the Clontech “full-length” amplification protocol. A gel cut of 400 to 800 bp fragments was combined with nebulized products from the larger cDNA fragments to generate fragments of an optimum sized sequencing library for the 454 Titanium platform. Other libraries were prepared by isolating total RNA using Trizol and RNeasy columns followed by mRNA isolation using the Qiagen kit and cDNA genration using the Invitrogen Superscript kit #11917-010 with random primers. A gel cut of 400 to 800 bp fragments was combined with nebulized products from the larger cDNA fragments to generate fragments of an optimum sized sequencing library for the 454 Titanium platform.
Honey Bee peptide atlas
We performed liquid chromatography-tandem mass spectrometric (LC-MS/MS) analysis of bee protein extracts from 253 samples, representing three castes, larvae and virtually all adult honey bee tissues in both sexes and of different disease states. Tissue collection and interpretation of the LC-MS/MS data has largely been described elsewhere [56–61] and is available for public download from the Honey Bee Peptide Atlas . The raw data from these studies, amounting to more than 8 × 106 tandem mass spectra, were searched against a six-frame translation (3,596,047 forward sequences, with reversed complemented sequences and common contaminants concatenated) of Amel_4.5 using Mascot (v2.3, Matrix Science). This exercise identified 30,622 unique peptide sequences at a false discovery rate of 1%, of which 5,834 peptides mapped to regions of the genome, where genes were previously unknown in Amel_4.0. As these results were based solely on a basic translation of raw genomic sequence, these peptides represent only tryptic peptides wholly within a single exon.
We analyzed the honey bee worker venom proteome by integrating a combinatorial peptide ligand library (CPLL) with liquid chromatography/Fourier transform ion cyclotron resonance (LC-FTICR) MS/MS. The collection and interpretation of the MS/MS data are described elsewhere . Gene prediction datasets and a six-frame translation of Amel_4.5 were searched using Mascot (v2.3, Matrix Science). Setting the significance threshold at p < 0.01 led to a peptide false discovery rate of 5.23% for the search of the AUGUSTUS AU9 gene set, 2.51% for the AUGUSTUS AU11 search and 3.77% for the Amel_4.5 NCBI RefSeq search. MS/MS data generated from the CPLL flow-through fractions, and the elution fractions separated by Tris-glycine- or Tris-tricine-SDS-PAGE gels were separately searched against the genome six-frame translation resulting in false discovery rates of respectively 1.56%, 3.75% and 3.44%.
Summary of gene prediction sets
Genes were predicted using a variety of methods including the NCBI RefSeq and Gnomon pipelines, AUGUSTUS, SGP2, GeneID, Fgenesh++ and N-SCAN. Unless stated otherwise below, gene prediction pipelines used the masked assembly available from NCBI , which was generated using RepeatMasker . New transcriptome data was used either directly as evidence or in the generation of training sets for the predictors. The Augustus analysis also incorporated available peptide data, and the N-SCAN analysis leveraged nucleotide sequence conservation between the A. mellifera genome and the other bee genomes. SGP2 leveraged conservation between the A. mellifera genome and the previously published Nasonia genomes  based on translated alignments.
NCBI RefSeq and Gnomon
The Amel_4.5 assembly was annotated with NCBI's eukaryotic genome annotation pipeline (version 3.0), as described at . The NCBI pipeline uses a repeat-masked assembly generated by WindowsMasker  and transcript and protein alignment evidence supplemented with ab initio prediction to annotate coding and non-coding transcripts and proteins. The evidence used for this annotation run included alignments of:
9 million RNAseq reads from 454 sequencing (described above), which were treated as ESTs in the pipeline.
All available honey bee ESTs and mRNAs.
Proteins from the FlyBase annotation of Drosophila melanogaster (release 5.30).
Proteins from the RefSeq annotation of human.
Proteins annotated on insect mRNAs.
Proteins from the annotations of the ant genomes, Harpegnathos saltator and Camponotus floridanus available in GenBank.
The final RefSeq annotation included models that were completely or partially supported by alignment evidence. The pipeline had some provisions to predict models that were disrupted by frameshifts or stop codons in the assembly, some of which were assigned protein accessions (XP_ prefixes) and named with the prefix ‘LOW QUALITY PROTEIN’, whereas others were conservatively classified as pseudogenes and not assigned protein accessions. The RefSeq annotation is available from NCBI's genomes FTP site as NCBI build 5.1 .
AUGUSTUS can be used as an ab initio gene prediction tool, but can also integrate extrinsic evidence from various sources .
Generation of training gene structures and training AUGUSTUS
We used Scipio  to generate gene structures on the Amel_4.5 assembly with a protein set from a previous A. mellifera annotation (Amel_pre_release2_OGS_pep.fa). We used these gene structures to optimize AUGUSTUS parameters for A. mellifera, and constructed UTR models from 78,274 A. mellifera ESTs from GenBank, which were used to train AUGUSTUS UTR parameters. We then predicted genes in the Amel_4.5 assembly. Individual RNAseq reads from 454 sequencing (described above) were mapped against predicted transcripts, and fully covered transcripts (2,151) were selected as training genes for optimizing a final AUGUSTUS parameter set.
Gene prediction with AUGUSTUS
We generated three gene sets using AUGUSTUS: a gene set with extrinsic evidence from ESTs and RNAseq data (AU9), a particularly inclusive gene set that contained many alternative transcripts for peptide identification (AU11), and a gene set with extrinsic evidence from ESTs, RNAseq data and peptide data (AU12) (Table S6 in Additional file 1).
We created extrinsic evidence “hints” for protein coding genes and transcripts from the A. mellifera ESTs and from 454 transcriptome libraries. Genes were predicted with AUGUSTUS, allowing the prediction of alternative transcripts and allowing the splice site AT-AC (in addition to GT-AG and GC-AG) in case of supporting extrinsic evidence. The resulting gene set was named AU9. AU9 genes were predicted using the following options: 2augustus –species = honeybee1 –UTR = on –print_utr = on –hintsfile = all_but_no_peptide.hints –extrinsicCfgFile = extrinsic.M.RM.E.W.cfg –exonnames = on –codingseq = on –alternatives-from-evidence = true –allow_hinted_splicesites = atac genome.fa
For the purpose of peptide identification, alternative transcripts were extensively sampled with AUGUSTUS, resulting in the gene set AU11. AU11 genes were predicted issuing the following command: augustus –UTR = on –print_utr = on –hintsfile = all_but_no_peptide.hints –extrinsicCfgFile = extrinsic.M.RM.E.W.cfg –exonnames = on –codingseq = on –species = honeybee1 –alternatives-from-evidence = true –alternatives-from-sampling = true –sample = 100 –minexonintronprob = 0.1 –minmeanexonintronprob = 0.4 –maxtracks = -1 –allow_hinted_splicesites = atac genome.fa
We generated hints from peptide sequences by mapping the peptides against the protein set of AU11 and against a six-frame translation of the genome using BLAT  in a non-redundant way (i.e. parts of the six-frame translation that were included in the protein set AU11 and redundant parts of the AU11 protein set that were removed). A final AUGUSTUS gene set AU12 was generated using all available extrinsic evidence and the following options: augustus –species = honeybee1 –UTR = on –print_utr = on –hintsfile = all.hints –extrinsicCfgFile = extrinsic.M.RM.E.W.cfg –exonnames = on –codingseq = on –alternatives-from-evidence = true –allow_hinted_splicesites = atac genome.fa.
Predictions were made using FGENESH 3.1.1 [70, 71] using the HBEE matrix with parameters specific for A. mellifera. We used Illumina transcriptome data from A. mellifera forager and nurse brains available from the SRA (SRP003528), which were a total of 181.8 M spots, 18.3G bases of 100 bp single end reads generated on an Illumina Genome Analyzer II in 2010. We mapped the Illumina RNASeq using the ReadsMap program , which provided intron position information to Fgenesh for building sample-specific gene models. Predictions were made based on individuals used in Illumina RNASeq libraries (five nurses and five foragers), and then were combined into forager and nurse group predictions, and redundant genes (those having coinciding coding sequences) were removed from each set. Finally, the forager and nurse predictions were combined into a final set of predictions, and redundant genes (those having coinciding coding sequences) were removed from this combined set to produce the final Fgenesh++ prediction set.
GeneID is an ab initio gene prediction program used to find potential protein-coding genes in anonymous genomic sequences. The training of GeneID to obtain a parameter file for A. mellifera was based on the method described to obtain a Drosophila melanogaster GeneID parameter file . Training was performed in a “semi-automated” manner by employing a recently developed GeneID training tool that computes position weight matrices (PWMs) or Markov models of order 1 for splice sites and start codons, and derives a model of coding DNA, which, in this case, is a Markov model of order 5. Furthermore, once a preliminary species-specific matrix is obtained it is further optimized by adjusting two internal matrix parameters: -the cutoff of the scores of the predicted exons (eWF) and the ratio of signal to coding statistics information to be used (oWF).
The initial A. mellifera training set was comprised of the 2,151 gene models used to train AUGUSTUS (described above). Of these gene models 80% (1,720) were used to train GeneID while the remaining 20% (431) were set aside to test the accuracy of the newly developed matrix. The 1,720 A. mellifera protein-coding gene models included 7,913 canonical donor splice sites/7,939 canonical acceptor sites and 1,720 start codons. The start codons were used to compute PWMs while the donor and acceptors were used to derive Markov matrices of order 1. Given the large number of sequences we also had enough coding (2,338,800) and non-coding (5,561,154) nucleotides to derive a Markov of order 5 for the coding potential. We tested accuracy of the GeneID A. mellifera parameter file on an artificial contig consisting of the 431 evaluation-set concatenated gene models with 800 nucleotides of intervening sequence between each of the genes (Table S7 in Additional file 1). We then used the GeneID parameter files to predict genes on an assembly consisting of Amel_4.5 sixteen chromosomes and 5,304 "unplaced" scaffolds files that had repeat sequences masked using Repeatmasker. GeneID predicted 24,554 protein-coding genes.
SGP2 is a syntenic gene prediction tool that combines ab initio gene prediction (GeneID) with TBLASTX searches between two or more genome sequences to provide both sensitive and specific gene predictions, and it tends to improve GeneID’s performance, especially by reducing the number of false-positive predictions. SGP2 requires one or more reference genomes to which the target genome (in this case A. mellifera) is compared. We decided to use the genomes of Nasonia vitripennis, N. giraulti and N. longicornis as references to develop our A. mellifera parameter file for SGP2 because the genus Nasonia is at an appropriate evolutionary distance from Apis such that mostly the coding regions of the genes, not the introns or intergenic regions, are significantly conserved between these two genomes.
Obtaining the SGP2 A. mellifera-specific parameter file was based on the methodology described by Parra et al used to obtain a human SGP2 parameter file using mouse homology evidence. The starting point to obtain a parameter file for SGP2 was the previously described GeneID A. mellifera matrix. The GeneID-derived SGP2 parameter file was optimized on an artificial contig comprising the same concatenated 1,720 sequences used to train GeneID, with 800 nucleotides between each of the gene models. We optimized the SGP2 matrix by modifying not only the eWF internal parameter (as previously for the GeneID parameter file) but also two SGP2-specific internal parameters (“NO_SCORE” and “HSP_factor”). The “NO_SCORE” parameter provides a penalty for no overlap between TBLASTX-derived HSPs (High-Scoring Pairs) and GeneID ab initio predictions in the same region whereas the “HSP_factor” parameter reduces the score assigned to the HSPs in order to maximize the prediction accuracy. We evaluated the newly developed SGP2 parameter file on the same artificial contig consisting of the 431 concatenated gene models with 800 nucleotides of intervening sequence between each of the genes used to evaluate the GeneID bee matrix (Table 1). We then used the SGP2 parameter file2 to predict genes on the same assembly file used for GeneID, and generated 20,179 predictions.
We used the N-SCAN package  to leverage conservation between the A. mellifera genome and genomes of two other bee species, A. florea (Aflo_1.0 ) and Bombus terrestris (Bter_1.0). We first masked Amel_4.5 for simple sequence repeats using RepeatMasker . We ran LASTZ  using default parameters with Amel_4.5 as the target genome, and either Apis florea (Aflo_1.0) or Bombus terrestris (Bter_1.0) as the informant genome. We then used iParameterEstimation to generate both an Amel_4.5-Aflo_1.0 specific parameter set as well as an Amel_4.5-Bter_1.0 parameter set using the training set described above for AUGUSTUS gene prediction, including UTR features. Finally, we ran N-SCAN using each of the A. mellilfera specific parameter sets with the respective LASTZ informant alignments to produce two N-SCAN prediction sets, one set based on Aflo_1.0 as the informant genome and the other set based on Bter_1.0 as the informant genome.
Combining gene sets
Input data for combined gene sets
We used MAKER2 and GLEAN to generate combined gene sets. The MAKER2 and GLEAN analyses used the same set of input data. Both analyses combined the gene predictions described above (NCBI, AUGUSTUS, Fgenesh++ with RNAseq, N-SCAN using A. florea as an informant genome, GeneID and SGP2) with transcript and protein homolog alignments. Transcript data included the new 454 transcriptome data described above, A. mellifera ESTs from GenBank and Illumina nurse and forager reads downloaded from the SRA (SRP003528, described above).
We aligned Illumina reads to Amel_4.5 in two groups, nurse and forager, using Tophat version 1.3.1 with the option "--butterfly-search" for more sensitive splice junction detection, and then generated predicted transcripts for each set of pooled data using Cufflinks version 1.0.3 with default parameters. The 454 reads were assembled into contigs de novo using Newbler (2.3-PreRelease-9/14/2009) with the cDNA option. We aligned 454 contigs and ESTs to Amel_4.5 using MAKER2 v2.15, which uses WU-BLAST  and Exonerate est2genome , with minimum 80% alignment coverage and 95% identity. Protein homolog alignments included SwissProt  Metazoa homologs, Drosophila melanogaster (fruit fly; r5.31) , Nasonia vitripennis (parasitoid wasp; OGSv1.2)  and the ants: Atta cephalotes (OGSv1.1) , Camponotus floridanus (OGSv3.3) , Harpegnathos saltator (OGSv3.3) , Linepithema humile (OGSv1.1) , Pogonomyrmex barbatus (OGSv1.1) ). Proteins in the SwissProt dataset annotated as transposable elements were removed prior to alignment. We aligned protein sequences to Amel_4.5 using Exonerate protein2genome with a minimum 60% percent identity and 60% alignment coverage.
To create a combined gene set, we ran MAKER2 v2.15 using parameters min_contig = 1000 and pred_gff, which allowed us to provide as input the gene prediction sets and alignments described above, instead of generating new evidence tracks within MAKER2.
We ran GLEAN  32 times to create consensus gene sets using different combinations of the gene prediction sets described above. All of the GLEAN runs included the transcript and protein homolog alignments described above, and required a minimum coding sequence length of 75 nt.
Selecting the new official gene Set
We evaluated the 32 GLEAN sets based on several criteria including overlap with a conservative evidence-based set (RefSeq), transcript sequences, peptides and the CEGMA conserved core set  (Additional file 2). NCBI’s RefSeq pipeline has been considered reliable and relatively conservative, so we performed overlap analyses to determine how many of the RefSeq models were captured in the GLEAN consensus sets. We used FASTA  to align GLEAN coding sequences with RefSeq coding sequences where a perfect alignment required 99% identity over the entire lengths of both sequences. We used FASTA to align peptides to GLEAN proteins, with E-value and scoring matrix optimized for short exact matches (E-value .01 and MD10 scoring matrix). We parsed peptide alignments to count those with 100% identity and 100% alignment coverage (Additional file 2).
In addition to alignments between GLEAN predictions and RefSeq genes and peptides, we considered numbers of gene models, total numbers of coding nucleotides, average coding sequence lengths, and numbers of splits and merges compared to RefSeq. We selected the GLEAN31 set (Additional file 2) to be the official gene set, OGSv3.2. It was the set generated using gene predictions from NCBI Gnomon, AUGUSTUS, Fgenesh++, N-SCAN using A. florea as an informant genome and GeneID and SGP2 combined as a single set as well as the transcript and protein homolog alignments.
Adding UTRs to OGSv3.2 gene models
Although we did not use MAKER2 to generate the official gene set, we did use MAKER2 (v2.15)  to add UTR to the GLEAN coding exons since GLEAN does not produce annotations with UTR features. OGSv3.2 coding exons were input as “pred_gff” and transcriptome evidence (including the 454 transcripts, Illumina contigs and A. mellifera ESTs described above) was input as “est”. MAKER2 aligned the EST evidence to Amel_4.5 using WU-BLAST and Exonerate est2genome then used overlapping EST evidence to extend OGSv3.2 models to include UTR features when possible. Because MAKER2 sometimes modified the coding exon coordinates, we processed the MAKER2 output and retained UTRs only when the coding exon structure was unchanged. Out of a total of 15,314 OGSv3.2 genes, UTR were added to 7,514 genes (49%).
Identifying and characterizing of new genes
Identifying of new and previously known OGSv3.2 genes
In order to compare the newest gene set (OGSv3.2) with the first official gene set (OGSv1.0), we mapped OGSv3.2 coding sequences to Amel_2.0, which was the assembly on which OGSv1.0 was generated . First, we used MegaBLAST  to identify scaffold/gene matches with 95% identity and E-value < 1 × 10-20. We then aligned coding sequences to matching scaffolds using GMAP , and parsed the output to create two sets of splice-modeled alignments, both requiring 95% identity. One set was based on a relaxed coverage criterion, requiring that the alignment cover at least 50% of the coding sequence. The other set was based on a stringent coverage criterion, requiring that the alignment cover 80% of the coding sequence. Results of further analyses for the relaxed mapping set are provided in the supplemental materials, but we discuss only results for the stringent mapping.
On the basis of mapping OGSv3.2 to Amel_2.0 and overlap between OGSv3.2 and OGSv1.0 gene models on the Amel_2.0 assembly, we divided 15,314 OGSv3.2 genes into three sub-sets (Table 6). We deemed any OGSv3.2 gene that did not align to the Amel_2.0 assembly a “Type I New” gene. The additional sequencing and reassembly of the genome for the Amel_4.5 assembly likely allowed the detection of these genes. “Type II New” genes were those that did align to the Amel_2.0 assembly, but whose coordinates did not overlap an OGSv1.0 gene by a single coding base pair on the same strand. Additional expressed sequence and protein homolog evidence as well as improvements to gene prediction algorithms likely contributed to the detection of these genes. Finally, any OGSv3.2 gene that both aligned to the Amel_2.0 assembly and overlapped an OGSv1.0 gene was deemed a “Previously Known” gene.
Coding sequence length analysis
The total length of the coding sequence was calculated for each gene and the means for all genes and each gene sub-set were calculated (Table 6). We tested the null hypotheses that the mean coding sequence lengths of Type I and Type II New genes and Previously Known genes were equal.
Splice site and single versus multiple coding exon gene analysis
We assessed the genomic sequence of the two intronic base pairs adjacent to each coding sequence exon-intron splice site to determine whether they corresponded to the canonical …]5’-GT/AG-3’[… splice site sequence. We considered only splice sites supported by matching intron coordinates of spliced transcript alignment evidence. We used chi-square tests with one degree of freedom to compare the frequencies of single coding exon genes and non-canonical splice sites in Type I or Type II New genes with Previously Known genes.
OGSv3.2 gene location relative to GC compositional domains
We used IsoPlotter, a recursive segmentation algorithm [84, 85], to partition the A. mellifera genome into GC compositionally homogeneous domains, contiguous regions of the genome with similar GC content (percent G + C nucleotides). We determined the GC content of the GC compositional domain for each OGSv3.2 gene. In cases where a gene spanned multiple GC compositional domains, we calculated the average GC content of the GC compositional domains, and weighted it according to the fraction of the gene's length that occurs in each GC compositional domain. We computed the weighted percent GC based only on non-coding nucleotides of the compositional domains, because we did not wish to include effects of codon bias.
We compared the distribution of Type I and Type II New genes with respect to GC content to that of Previously Known genes. IsoPlotter cannot segment scaffolds less than 10 kb into compositional domains, so the 90 genes residing in these short scaffolds were not considered. We tested the null hypotheses that the means of the weighted GC compositional domain contents for genes in the Type I and Type II New gene sets were equal to the mean of the Previously Known genes.
Effective number of codons analysis
Using the chips program within the EMBOSS package , we calculated the effective number of codons separately for each OGSv3.2 gene. We tested the null hypotheses that the mean effective number of codons values for the Type I and Type II New genes were equal to the mean of the Previously Known genes.
Tissue expression analysis
We determined the number of OGSv3.2 gene overlaps to transcript alignments that were used in creating the GLEAN consensus gene sets (454 reads, Illumina contigs and A. mellifera ESTs from GenBank, described above). We relied on splice signals to determine the directionality of a transcript read. We tallied spliced and unspliced alignments separately, since we could be confident when directionality of a spliced alignment agreed with a gene prediction, but could not be confident about unspliced alignments. For spliced transcript alignments, if the transcript was on the opposite strand from the gene then it was discarded from further analysis. For transcripts on the same strand or transcripts that were un-spliced, in which case directionality could not be determined, a coordinate overlap of at least one coding base pair was required for a gene to count as overlapping with a transcript alignment. We counted the number of transcript data sets in which each OGSv3.2 gene was found to have an overlapping alignment (Table 6.) We performed chi-square tests with one degree of freedom to compare the frequencies of spliced transcript overlap in the Type I or Type II New gene sets with the Previously Known gene set.
Of genes that overlapped spliced transcript alignments, we identified genes that were narrowly expressed and genes that were broadly expressed on the basis of overlap to the four single-tissue libraries (brain [combined Illumina forager and nurse brain libraries] and 454 libraries of mixed antennae, ovary and testes). (Foragers and nurses are worker honey bees that specialize on collecting food and feeding brood, respectively.) Genes were deemed narrowly expressed if they overlapped at least one transcript alignment in only one of the four tissues and broadly expressed if they overlapped at least one transcript alignment from all four tissues. We performed chi-square tests with one degree of freedom to compare the frequencies of narrowly expressed genes and broadly expressed genes in the Type I or Type II New gene sets with the Previously Known gene set.
We determined the number of protein alignments overlapping OGSv3.2 for protein data sets that were used in creating the GLEAN consensus gene sets. We required overlap of at least one coding base pair on the same strand to deem a gene overlapping with a protein homolog alignment. We performed chi-square tests with one degree of freedom to compare the frequency of the existence of overlaps to homolog alignments for Type I or Type II New genes with that of Previously Known genes.
TBLASTN alignment of OGSv3.2 to A. florea and B. terrestris genomes
We aligned OGSv3.2 protein sequences to the A. florea (Aflo_1.0) and B. terrestris (Bter_1.0) genome assemblies using TBLASTN  with an E-value criteria of 1 × 10-06. We did not use information about predicted genes or expression in A. florea or B. terrestris.
Statistical methods to test for differences in means between new and previously known genes
To test the null hypothesis that the mean of a particular variable for Type I or Type II New genes was equal to the mean of the Previously Known genes, we used both a non-parametric Kolmogorov-Smirnov test and a Welch t-test with the correction for non-homogeneity of variances. Testing the hypotheses in this way avoids assuming these data were normally distributed or had equal variances. To be conservative, we report the least significant P-value for each test.
Using peptide data in development and analysis of gene sets
We used the peptide data is described above to evaluate the GLEAN sets and analyze Type I New, Type II New, and Previously Known genes. We aligned the peptide sequences to predicted protein sequences with FASTA  with a relaxed E-value of 0.1 and the MD10 scoring matrix. These parameters were found to allow matches to peptide sequences as short as 6 amino acids with 100% identity. Only alignments with 100% identity were retained. We used chi-square tests with one degree of freedom to compare the frequency of proteins that aligned to peptide sequences in Type I or Type II New genes with that of Previously Known genes.
The venom peptide data were used separately to evaluate gene sets for improved identification of venom genes. All significant and top ranking venom peptides from the Mascot output, with an ion score ≥30 were retained in the final peptide lists. Venom mass spectra were searched against the OGSv3.2 and OGSv1.0 to compare the contribution of both datasets to the identification of new venom genes. The false discovery rates of both searches were set to 1%.
The protein-coding gene annotations from the two A. mellifera genome assemblies were compared with orthologs from OrthoDB  from nine other insects. These included Pediculus humanus (PhumU1.2, 10,772 genes), Acyrthosiphon pisum (ACYPI v2.1, 36,275), Nasonia vitripennis (nvit2, 24,369), Linepithema humile (OGSv1.2, 16,048), Pogonomyrmex barbatus (OGSv1.2, 17,100), Tribolium castaneum (Tcas 3.0, 16,565), Danaus plexippus (OGS2, 15,329), Anopheles gambiae (AgamP3.6, 12,670), and Drosophila melanagaster (r5.45, 13,927). For annotations on the older A. mellifera genome assembly, we used the gene set known to the community as “Amel_prerelease2” (abbreviated as V2), available from BeeBase. It was the gene set resulting from mapping OGSv1.0 from assembly Amel_2.0 to assembly Amel_4.0, and included a small number of manual annotations, with a total of 10,699 genes. Comparing each Apis annotation (V2 and OGSv3.2) to the other nine gene sets identified near-universal orthologous groups with orthologs in all but one or all but two insects. For each gene set, Figure 4 and Table S5 in Additional file 1 show counts of near-universal insect orthologous groups that are missing orthologs in different species. Total counts were partitioned into groups with only single-copy orthologs and those with gene duplications, further divided into those with only one missing species and those with two missing species.
Predicting protein functions
We used FASTA  with an E-value threshold of 1 × 10-6 to compute reciprocal alignments between OGSv3.2 proteins and a D. melanogaster protein set consisting of the longest protein isoform of each gene (annotation version r5.42). We identified reciprocal best hits (RBH) and transferred Gene Ontology (GO)  annotations from the D. melanogaster protein to the A. mellifera protein for each RBH pair, using the GO annotation file available at FlyBase . We used GeneMerge  to test for enrichment of GO terms in OGSv3.2 protein datasets, testing for each of the three GO ontologies (Molecular Function, Biological Process and Cellular Component) separately. Several tests were performed with either the entire set of Gene Ontology terms, the generic GO slim set, or the GO slim set developed for A. mellifera by Whitfield et al. . Population and test gene datasets for a particular GO ontology included only OGSv3.2 genes with GO annotations for that ontology. Population datasets consisted of all OGSv3.2 genes with GO annotations. Test datasets were 1) all new genes based on stringent mapping criteria, 2) Type I New genes using stringent criteria, 3) Type II New genes based on stringent mapping criteria.
We used InterProScan  to compare OGSv3.2 and OGSv1.0 proteins with the following InterPro  protein domain and motif databases: PFAM , TIGRFAMS , SMART , PRODOM , PROSITE , PIRSF , GENE3D , SUPERFAMILY , and PANTHER . The total numbers of proteins annotated with at least one InterPro domain were 9,479 and 8,552 for OGSv3.2 and OGSv1.0, respectively. For each InterPro domain identified in the combined datasets, we determined the number of proteins containing that domain within OGSv3.2 and OGSv1.0. Then for each InterPro domain, we used 2 × 2 chi-square tests with Yates correction and one degree of freedom to determine whether the frequencies of proteins containing that domain differed between the OGSv3.2 and OGSv1.0 InterPro-annotated sets (total 9,479 and 8,552 proteins, respectively).
Detecting genome-wide repetitive elements
We detected and annotated repetitive elements with the REPET software package (, version 2.0) consisting of two pipelines integrating a set of bioinformatics programs. First, repeated sequences were detected by similarity, using an all-by-all BLAST  search via BLASTER . LTR-retrotransposons were detected by structural search with LTRharvest . The similarity matches were clustered with GROUPER , RECON  and PILER , the structural matches were clustered with NCBI BLASTclust . From each cluster a consensus sequence was generated by multiple alignment with Map. We analyzed the consensus sequences for terminal repeats (TRsearch), tandem repeats (TRF), open reading frames (dbORF.py, REPET) and poly-A tails (polyAtail, REPET). We screened the consensuses for matches to nucleotide and amino acid sequences from known transposable elements (RepBase 17.01, ) using BLASTER , which runs tblastx and blastx , and searched them for HMM profiles (Pfam database 26.0, ) using HMMER3 . Based on the detected structural features and homologies, we classified the consensuses using PASTEC according to Wicker et al. . We then removed redundancies identified with BLASTER and MATCHER  as well as elements classified as simple sequence repeats (SSRs; >0.75 SSR coverage) or unclassified elements built from less than 10 fragments.
We used the set of de novo detected repetitive elements to mine the genome in a second pipeline with BLASTER (using NCBI BLAST, sensitivity 4, followed by MATCHER), RepeatMasker (using CrossMatch, sensitivity q, cutoff at 200) and CENSOR (using NCBI BLAST). We removed false positive matches using an empirical statistical filter. Satellite repeats were detected with TRF , MREPS and RepeatMasker  and were then merged into a single set. We also screened the genomic sequences for matching nucleotide and amino acid sequences from known transposable elements (RepBase 17.01, ) with BLASTER. Finally we removed TE doublons (loci annotated as multiple transposable elements) and SSR annotations within transposable element annotations, and performed a "long join procedure" to connect distant fragments. Sequences from the de novo repetitive element library, which were found to have at least one perfect match in the genome were then used to rerun the whole analysis.
To ensure compatibility and to avoid introducing a bias, we refrained from a manual curation or clustering of the de novo detected elements before mining the genome. However, post hoc we manually analyzed all elements, which were previously classified into class I retrotransposon or class II DNA transposon elements or unclassified elements with detected coding element features (similarity to known transposable elements) due to potential chimeric insertion. At this stage we excluded derivative elements (LARD, TRIM, MITE) from further detailed inspection unless carrying a class I or class II element. Some elements were classified “potential Hostgene” in the computational analysis, based on characteristics of the DNA, not based on overlap analysis with predicted genes. These “potential Hostgene” elements, as well as unclassified elements (“noCat”), were also excluded from manual analysis. We performed manual inspection by checking for open-reading frames (ORF) with the NCBI ORF Finder (NCBI), by searching the NCBI Conserved Domain Database (CDD) , by searching the most up to date online RepBase database (accessed December 2012-February 2013) via CENSOR . We also performed phylogenetic analysis for LINE RT domains with RTclass1  in order to achieve a detailed classification for each element, determine its potential relation to a family of known elements, to evaluate the completeness and to detect potential active elements. We defined an element to be complete, if it possessed the relevant coding parts with the element-typical domains and the structural features (LTR, TIR). The potential activity was defined according to the region an intact ORF, if present, covered. If an intact ORF seemed to cover a complete region including the typical domains (e.g. GAG as well as POL, Tase) then the element was considered to be potentially active. If a Tase domain was covered by a truncated ORF or the Tase itself appeared to be truncated but was covered by an intact ORF, or if the RT domain was covered by an active ORF but not the remaining element-typical domains, then the element was considered to be maybe potentially active. During the manual classification to at least superfamily level, novel transposable element types not covered by the system of Wicker et al.  were also considered: Kolobok, Sola, Chapaev, Ginger, Academ, Novosib and ISL2EU class II DNA transposons [117, 118].
Simple sequence repeats and other low complexity regions were extracted from the REPET pipeline database and processed with a custom Perl script to calculate the total coverage of these types of repetitive DNA by omitting overlaps with transposable element or other repetitive element annotations.
Experimental research followed appropriate guidelines for the ethical treatment of research subjects. Human subject and animal protocol approvals were not applicable.
The 454 transcript read data are available in the Sequence Read Archive (SRA)  at the NCBI (SRP003261, SRP003260, SRP001899). The assembled 454 transcripts (119,959) are in the Transcriptome Shotgun Assembly (TSA) database, and available through NCBI BioProject pages for PRJNA51481 and PRJNA51483 .
The accessions for the assembled 454 transcript data are: HP542035 to HP552088 (testes), HP527956 to HP542034 (mixed antennae), HP509343 to HP527955 (embryo), HP482918 to HP509342 (brain; ovary), HP473811 to HP482917 (larvae), HP459439 to HP473810 (abdomen), and HP552089 to HP579397 (ovary).
The SOLID genomic read data are available in the SRA (SRX097020). The 454 genomic read data are also available (SRX006752, SRX000071).
The Amel_4.5 assembly is available from NCBI under the accession GCA_000002195.1.
The following resources are available at BeeBase , a division of the Hymenoptera Genome Database : genome browsers with gene annotations and supporting evidence alignments; BLAST databases with the Amel_4.5 scaffold assembly, OGSv3.2, all input gene prediction sets and transcript contig assemblies; and a data download page with fasta sequence files and gff for annotations. Peptides and their tandem mass spectra are available from the Apis mellifera PeptideAtlas .
Bacterial artificial chromosome
Combinatorial peptide ligand library
Dictyostelium intermediate repeat sequence
Effective number of codons
Expressed sequence tag
Fourier transform ion cyclotron resonance
GAG-Protein of retrotransposons
Hidden Markov model
High scoring pair
Large retrotransposon derivative
Long interspersed element
Long terminal repeat
Miniatiure inverted-repeat transposable element
Tandem mass spectrometry
New transcribed region
Official gene set
Open reading frame
POL-polyprotein of retrotransposons
Position weight matrix
Reciprocal best hit
Short interspersed element
Sequence Read Archive
Simple sequence repeat
Terminal inverted repeat
Terminal repeat retrotransposon in miniature
Honey Bee Genome Sequencing Consortium: Insights into social insects from the genome of the honeybee Apis mellifera. Nature. 2006, 443: 931-949. 10.1038/nature05260.
Zayed A, Robinson GE: Understanding the relationship between brain gene expression and social behavior: lessons from the honey bee. Annu Rev Genet. 2012, 46: 591-615. 10.1146/annurev-genet-110711-155517.
Begna D, Han B, Feng M, Fang Y, Li J: Differential expressions of nuclear proteomes between honeybee (Apis mellifera L.) queen and worker larvae: a deep insight into caste pathway decisions. J Proteome Res. 2012, 11: 1317-1329. 10.1021/pr200974a.
Cornman RS, Tarpy DR, Chen Y, Jeffreys L, Lopez D, Pettis JS, vanEngelsdorp D, Evans JD: Pathogen webs in collapsing honey bee colonies. PLoS ONE. 2012, 7: e43562-10.1371/journal.pone.0043562.
Foret S, Kucharski R, Pellegrini M, Feng S, Jacobsen SE, Robinson GE, Maleszka R: DNA methylation dynamics, metabolic fluxes, gene splicing, and alternative phenotypes in honey bees. Proc Natl Acad Sci USA. 2012, 109: 4968-4973. 10.1073/pnas.1202392109.
Li-Byarlay H, Li Y, Stroud H, Feng S, Newman TC, Kaneda M, Hou KK, Worley KC, Elsik CG, Wickline SA, et al: RNA interference knockdown of DNA methyltransferase 3 affects gene alternative splicing in the honey bee. Proc Nat Aca Sci USA. 2013, 110: 12750-12755. 10.1073/pnas.1310735110.
Calderone NW: Insect pollinated crops, insect pollinators and US agriculture: trend analysis of aggregate data for the period 1992-2009. PLos One. 2012, 7: e37235-10.1371/journal.pone.0037235.
Gallai N, Salles JM, Settele J, Vaissière BE: Economic valuation of the vulnerability of world agriculture confronted with pollinator decline. Ecol Econ. 2009, 68: 810-821. 10.1016/j.ecolecon.2008.06.014.
Alaux C, Dantec C, Parrinello H, Le Conte Y: Nutrigenomics in honey bees: digital gene expression analysis of pollen's nutritive effects on healthy and varroa-parasitized bees. BMC Genomics. 2011, 12: 496-10.1186/1471-2164-12-496.
Johnson RM, Mao W, Pollock HS, Niu G, Schuler MA, Berenbaum MR: Ecologically appropriate xenobiotics induce cytochrome P450s in Apis Mellifera. PLoS ONE. 2012, 7: e31051-10.1371/journal.pone.0031051.
Lander ES, Linton LM, Birren B, Nusbaum C, Zody MC, Baldwin J, Devon K, Dewar K, Doyle M, FitzHugh W, et al: Initial sequencing and analysis of the human genome. Nature. 2001, 409: 860-921. 10.1038/35057062.
Venter JC, Adams MD, Myers EW, Li PW, Mural RJ, Sutton GG, Smith HO, Yandell M, Evans CA, Holt RA, et al: The sequence of the human genome. Science. 2001, 291: 1304-1351. 10.1126/science.1058040.
Church DM, Goodstadt L, Hillier LW, Zody MC, Goldstein S, She X, Bult CJ, Agarwala R, Cherry JL, DiCuccio M, et al: Lineage-specific biology revealed by a finished genome assembly of the mouse. PLoS Biol. 2009, 7: e1000112-10.1371/journal.pbio.1000112.
International Human Genome Sequencing Consortium: Finishing the euchromatic sequence of the human genome. Nature. 2004, 431: 931-945. 10.1038/nature03001.
Celniker SE, Wheeler DA, Kronmiller B, Carlson JW, Halpern A, Patel S, Adams M, Champe M, Dugan SP, Frise E, et al: Finishing a whole-genome shotgun: release 3 of the Drosophila melanogaster euchromatic genome sequence. Genome Biol. 2002, 3: RESEARCH0079-
C elegans Sequencing Consortium: Genome sequence of the nematode C. elegans: a platform for investigating biology. Science. 1998, 282: 2012-2018.
Elsik CG, Mackey AJ, Reese JT, Milshina NV, Roos DS, Weinstock GM: Creating a honey bee consensus gene set. Genome Biol. 2007, 8: R13-10.1186/gb-2007-8-1-r13.
Bonasio R, Zhang G, Ye C, Mutti NS, Fang X, Qin N, Donahue G, Yang P, Li Q, Li C, et al: Genomic comparison of the ants Camponotus floridanus and Harpegnathos saltator. Science. 2010, 329: 1068-1071. 10.1126/science.1192428.
Nygaard S, Zhang G, Schiott M, Li C, Wurm Y, Hu H, Zhou J, Ji L, Qiu F, Rasmussen M, et al: The genome of the leaf-cutting ant Acromyrmex echinatior suggests key adaptations to advanced social life and fungus farming. Genome Res. 2011, 21: 1339-1348. 10.1101/gr.121392.111.
Smith CD, Zimin A, Holt C, Abouheif E, Benton R, Cash E, Croset V, Currie CR, Elhaik E, Elsik CG, et al: Draft genome of the globally widespread and invasive Argentine ant (Linepithema humile). Proc Natl Acad Sci USA. 2011, 108: 5673-5678. 10.1073/pnas.1008617108.
Smith CR, Smith CD, Robertson HM, Helmkampf M, Zimin A, Yandell M, Holt C, Hu H, Abouheif E, Benton R, et al: Draft genome of the red harvester ant Pogonomyrmex barbatus. Proc Natl Acad Sci USA. 2011, 108: 5667-5672. 10.1073/pnas.1007901108.
Suen G, Teiling C, Li L, Holt C, Abouheif E, Bornberg-Bauer E, Bouffard P, Caldera EJ, Cash E, Cavanaugh A, et al: The genome sequence of the leaf-cutter ant Atta cephalotes reveals insights into its obligate symbiotic lifestyle. PLoS Genet. 2011, 7: e1002007-10.1371/journal.pgen.1002007.
Werren JH, Richards S, Desjardins CA, Niehuis O, Gadau J, Colbourne JK, Beukeboom LW, Desplan C, Elsik CG, Grimmelikhuijzen CJ, et al: Functional and evolutionary insights from the genomes of three parasitoid Nasonia species. Science. 2010, 327: 343-348. 10.1126/science.1178028.
Wurm Y, Wang J, Riba-Grognuz O, Corona M, Nygaard S, Hunt BG, Ingram KK, Falquet L, Nipitwattanaphon M, Gotzek D, et al: The genome of the fire ant Solenopsis invicta. Proc Natl Acad Sci USA. 2011, 108: 5679-5684. 10.1073/pnas.1009690108.
Florea L, Souvorov A, Kalbfleisch TS, Salzberg SL: Genome assembly has a major impact on gene content: a comparison of annotation in two Bos taurus assemblies. PLoS One. 2011, 6: e21400-10.1371/journal.pone.0021400.
Applied Biosystems: Whole genome sequencing of E. coli Bacteria.http://www3.appliedbiosystems.com/cms/groups/mcb_marketing/documents/generaldocuments/cms_057558.pdf,
Wheeler DA, Srinivasan M, Egholm M, Shen Y, Chen L, McGuire A, He W, Chen YJ, Makhijani V, Roth GT, et al: The complete genome of an individual by massively parallel DNA sequencing. Nature. 2008, 452: 872-876. 10.1038/nature06884.
Holt C, Yandell M: MAKER2: an annotation pipeline and genome-database management tool for second-generation genome projects. BMC Bioinformatics. 2011, 12: 491-10.1186/1471-2105-12-491.
Hunter S, Jones P, Mitchell A, Apweiler R, Attwood TK, Bateman A, Bernard T, Binns D, Bork P, Burge S, et al: InterPro in 2011: new developments in the family and domain prediction database. Nucleic Acids Res. 2012, 40: D306-D312. 10.1093/nar/gkr948.
Parra G, Bradnam K, Ning Z, Keane T, Korf I: Assessing the gene space in draft genomes. Nucleic Acids Res. 2009, 37: 289-297. 10.1093/nar/gkn916.
BeeBase Amel_4.5 JBrowse.http://hymenopteragenome.org:8080/Amel_4.5/jbrowse,
Lee E, Helt GA, Reese JT, Munoz-Torres MC, Childers CP, Buels RM, Stein L, Holmes IH, Elsik CG, Lewis SE: Web Apollo: a web-based genomic annotation editing platform. Genome Biol. 2013, 14: R93-10.1186/gb-2013-14-8-r93.
BeeBase Amel_4.5 Annotation Tools.http://hymenopteragenome.org/beebase/?q=registration_apollo_amel,
Wright F: The 'effective number of codons' used in a gene. Gene. 1990, 87: 23-29. 10.1016/0378-1119(90)90491-9.
Van Vaerenbergh M, Debyser G, Devreese B, de Graaf DC: Exploring the hidden honeybee (Apis mellifera) venom proteome by integrating a combinatorial peptide ligand library approach with FTMS. J Proteomics. 2014, In press
Lee E, Harris N, Gibson M, Chetty R, Lewis S: Apollo: a community resource for genome annotation editing. Bioinformatics. 2009, 25: 1836-1837. 10.1093/bioinformatics/btp314.
Ovchinnikov Y, Miroshnikov AI, Kudelin AB, Kostina MB, Boikov VA, Magazanik LG, Gotgil’F IM: Structure and presynaptic activity of tertiapin, a neurotoxin from honeybee venom. Bioorganicheskaya Khimiya. 1980, 6: 359-365.
Gmachl M, Kreil G: The precursors of the bee venom constituents apamin and MCD peptide are encoded by two genes in tandem which share the same 3'-exon. J Biol Chem. 1995, 270: 12704-12708. 10.1074/jbc.270.21.12704.
Robertson HM, Wanner KW: The chemoreceptor superfamily in the honey bee, Apis mellifera: expansion of the odorant, but not gustatory, receptor family. Genome Res. 2006, 16: 1395-1403. 10.1101/gr.5057506.
Witte CP, Le QH, Bureau T, Kumar A: Terminal-repeat retrotransposons in miniature (TRIM) are involved in restructuring plant genomes. Proc Natl Acad Sci USA. 2001, 98: 13778-13783. 10.1073/pnas.241341898.
Kalendar R, Vicient CM, Peleg O, Anamthawat-Jonsson K, Bolshoy A, Schulman AH: Large retrotransposon derivatives: abundant, conserved but nonautonomous retroelements of barley and related genomes. Genetics. 2004, 166: 1437-1450. 10.1534/genetics.166.3.1437.
Jurka J, Kapitonov VV, Pavlicek A, Klonowski P, Kohany O, Walichiewicz J: Repbase Update, a database of eukaryotic repetitive elements. Cytogenet Genome Res. 2005, 110: 462-467. 10.1159/000084979.
Lampe DJ, Witherspoon DJ, Soto-Adames FN, Robertson HM: Recent horizontal transfer of mellifera subfamily mariner transposons into insect lineages representing four different orders shows that selection acts only during horizontal transfer. Mol Biol Evol. 2003, 20: 554-562. 10.1093/molbev/msg069.
Feschotte C: Transposable elements and the evolution of regulatory networks. Nat Rev Genet. 2008, 9: 397-405. 10.1038/nrg2337.
International Aphid Genomics Consortium: Genome sequence of the pea aphid Acyrthosiphon pisum. PLoS Biol. 2010, 8: e1000313-10.1371/journal.pbio.1000313.
Beye M, Gattermeier I, Hasselmann M, Gempe T, Schioett M, Baines JF, Schlipalius D, Mougel F, Emore C, Rueppell O, et al: Exceptionally high levels of recombination across the honey bee genome. Genome Res. 2006, 16: 1339-1344. 10.1101/gr.5680406.
Kent CF, Minaei S, Harpur BA, Zayed A: Recombination is associated with the evolution of genome structure and worker behavior in honey bees. Proc Natl Acad Sci USA. 2012, 109: 18012-18017. 10.1073/pnas.1208094109.
Simola DF, Wissler L, Donahue G, Waterhouse RM, Helmkampf M, Roux J, Nygaard S, Glastad K, Hagen DE, Viljakainen L, et al: Social insect genomes exhibit dramatic evolution in gene composition and regulation while preserving regulatory features linked to sociality. Genome Res. 2013, 23: 1235-1247. 10.1101/gr.155408.113.
Graveley BR, Brooks AN, Carlson JW, Duff MO, Landolin JM, Yang L, Artieri CG, van Baren MJ, Boley N, Booth BW, et al: The developmental transcriptome of Drosophila melanogaster. Nature. 2011, 471: 473-479. 10.1038/nature09715.
Ladoukakis E, Pereira V, Magny EG, Eyre-Walker A, Couso JP: Hundreds of putatively functional small open reading frames in Drosophila. Genome Biol. 2011, 12: R118-10.1186/gb-2011-12-11-r118.
Kastenmayer JP, Ni L, Chu A, Kitchen LE, Au WC, Yang H, Carter CD, Wheeler D, Davis RW, Boeke JD, et al: Functional genomics of genes with small open reading frames (sORFs) in S. cerevisiae. Genome Res. 2006, 16: 365-373. 10.1101/gr.4355406.
i5K Consortium: The i5K initiative: advancing arthropod genomics for knowledge, human health, Agriculture, and the Environment. J Hered. 2013, 104: 595-600.
Genome 10 K Community of Scientists: Genome 10 K: a proposal to obtain whole-genome sequence for 10,000 vertebrate species. J Hered. 2009, 100: 659-674.
Eckalbar WL, Hutchins ED, Markov GJ, Allen AN, Corneveaux JJ, Lindblad-Toh K, Di Palma F, Alfoldi J, Huentelman MJ, Kusumi K: Genome reannotation of the lizard Anolis carolinensis based on 14 adult and embryonic deep transcriptomes. BMC Genomics. 2013, 14: 49-10.1186/1471-2164-14-49.
Ament SA, Chan QW, Wheeler MM, Nixon SE, Johnson SP, Rodriguez-Zas SL, Foster LJ, Robinson GE: Mechanisms of stable lipid loss in a social insect. J Exp Biol. 2011, 214: 3808-3821. 10.1242/jeb.060244.
Chan MM, Choi SY, Chan QW, Li P, Guarna MM, Foster LJ: Proteome profile and lentiviral transduction of cultured honey bee (Apis mellifera L.) cells. Insect Mol Biol. 2010, 19: 653-658. 10.1111/j.1365-2583.2010.01022.x.
Chan QW, Foster LJ: Changes in protein expression during honey bee larval development. Genome Biol. 2008, 9: R156-10.1186/gb-2008-9-10-r156.
Chan QW, Howes CG, Foster LJ: Quantitative comparison of caste differences in honeybee hemolymph. Mol Cell Proteomics. 2006, 5: 2252-2262. 10.1074/mcp.M600197-MCP200.
Chan QW, Melathopoulos AP, Pernal SF, Foster LJ: The innate immune and systemic response in honey bees to a bacterial pathogen, Paenibacillus larvae. BMC Genomics. 2009, 10: 387-10.1186/1471-2164-10-387.
Massa AN, Wanjugi H, Deal KR, O'Brien K, You FM, Maiti R, Chan AP, Gu YQ, Luo MC, Anderson OD, et al: Gene space dynamics during the evolution of Aegilops tauschii, Brachypodium distachyon, Oryza sativa, and Sorghum bicolor genomes. Mol Biol Evol. 2011, 28: 2537-2547. 10.1093/molbev/msr080.
Chan QW, Parker R, Sun Z, Deutsch EW, Foster LJ: A honey bee (Apis mellifera L.) PeptideAtlas crossing castes and tissues. BMC Genomics. 2011, 12: 290-10.1186/1471-2164-12-290.
NCBI Apis mellifera Annotation Build 5.1. ftp://ftp.ncbi.nlm.nih.gov/genomes/Apis_mellifera
NCBI Eukaryotic genome annotation process.http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/genome/annotation_euk/process,
Morgulis A, Gertz EM, Schaffer AA, Agarwala R: WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006, 22: 134-141. 10.1093/bioinformatics/bti774.
Stanke M, Schoffmann O, Morgenstern B, Waack S: Gene prediction in eukaryotes with a generalized hidden Markov model that uses hints from external sources. BMC Bioinformatics. 2006, 7: 62-10.1186/1471-2105-7-62.
Keller O, Odronitz F, Stanke M, Kollmar M, Waack S: Scipio: using protein sequences to determine the precise exon/intron structures of genes and their orthologs in closely related species. BMC Bioinformatics. 2008, 9: 278-10.1186/1471-2105-9-278.
Kent WJ: BLAT–the BLAST-like alignment tool. Genome Res. 2002, 12: 656-664. 10.1101/gr.229202. Article published online before March 2002.
Solovyev V: Finding genes by computer: probabilistic and discriminative approaches. Current Topics in Computational Biology. Edited by: Jiang T, Smith T, Xu Y, Zhang M. 2002, Cambridge, MA: MIT Press, 201-248.
Solovyev V, Kosarev P, Seledsov I, Vorobyev D: Automatic annotation of eukaryotic genes, pseudogenes and promoters. Genome Biol. 2006, 7 (Suppl 1): S10 11-12.
ReadMap: Aligning next generation sequences to the genome sequence.http://linux5.softberry.com/cgi-bin/berry/programs/ReadsMap,
Parra G, Blanco E, Guigo R: GeneID in Drosophila. Genome Res. 2000, 10: 511-515. 10.1101/gr.10.4.511.
Parra G, Agarwal P, Abril JF, Wiehe T, Fickett JW, Guigo R: Comparative gene prediction in human and mouse. Genome Res. 2003, 13: 108-117. 10.1101/gr.871403.
van Baren MJ, Koebbe BC, Brent MR: Using N-SCAN or TWINSCAN to predict gene structures in genomic DNA sequences. Curr Protoc Bioinformatics. 2007, Chapter 4: Unit 4 8-
Harris RS: Improved Pairwise Alignment of Genomic DNA. 2007, The Pennsylvania State University
Slater GS, Birney E: Automated generation of heuristics for biological sequence comparison. BMC Bioinformatics. 2005, 6: 31-10.1186/1471-2105-6-31.
Consortium UniProt: Update on activities at the Universal Protein Resource (UniProt) in 2013. Nucleic Acids Res. 2013, 41: D43-D47.
Marygold SJ, Leyland PC, Seal RL, Goodman JL, Thurmond J, Strelets VB, Wilson RJ: FlyBase: improvements to the bibliography. Nucleic Acids Res. 2012, 41: D751-D757.
Pearson WR: Rapid and sensitive sequence comparison with FASTP and FASTA. Methods Enzymol. 1990, 183: 63-98.
Zhang Z, Schwartz S, Wagner L, Miller W: A greedy algorithm for aligning DNA sequences. J Comput Biol. 2000, 7: 203-214. 10.1089/10665270050081478.
Wu TD, Watanabe CK: GMAP: a genomic mapping and alignment program for mRNA and EST sequences. Bioinformatics. 2005, 21: 1859-1875. 10.1093/bioinformatics/bti310.
Elhaik E, Graur D, Josic K, Landan G: Identifying compositionally homogeneous and nonhomogeneous domains within the human genome using a novel segmentation algorithm. Nucleic Acids Res. 2010, 38: e158-10.1093/nar/gkq532.
Elhaik E, Graur D: IsoPlotter+: a tool for studying the compositional architecture of genomes. ISRN Bioinformatics. 2013, 2013: 725434-
Olson SA: EMBOSS opens up sequence analysis. European molecular biology open software suite. Brief Bioinform. 2002, 3: 87-91. 10.1093/bib/3.1.87.
Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, Lipman DJ: Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997, 25: 3389-3402. 10.1093/nar/25.17.3389.
Munoz-Torres MC, Reese JT, Childers CP, Bennett AK, Sundaram JP, Childs KL, Anzola JM, Milshina N, Elsik CG: Hymenoptera Genome Database: integrated community resources for insect species of the order Hymenoptera. Nucleic Acids Res. 2011, 39: D658-D662. 10.1093/nar/gkq1145.
Waterhouse RM, Tegenfeldt F, Li J, Zdobnov EM, Kriventseva EV: OrthoDB: a hierarchical catalog of animal, fungal and bacterial orthologs. Nucleic Acids Res. 2013, 41: D358-D365. 10.1093/nar/gks1116.
Ashburner M, Ball CA, Blake JA, Botstein D, Butler H, Cherry JM, Davis AP, Dolinski K, Dwight SS, Eppig JT, et al: Gene ontology: tool for the unification of biology. The Gene ontology consortium. Nat Genet. 2000, 25: 25-29. 10.1038/75556.
Castillo-Davis CI, Hartl DL: GeneMerge–post-genomic analysis, data mining, and hypothesis testing. Bioinformatics. 2003, 19: 891-892. 10.1093/bioinformatics/btg114.
Whitfield CW, Band MR, Bonaldo MF, Kumar CG, Liu L, Pardinas JR, Robertson HM, Soares MB, Robinson GE: Annotated expressed sequence tags and cDNA microarrays for studies of brain and behavior in the honey bee. Genome Res. 2002, 12: 555-566. 10.1101/gr.5302.
Zdobnov EM, Apweiler R: InterProScan–an integration platform for the signature-recognition methods in InterPro. Bioinformatics. 2001, 17: 847-848. 10.1093/bioinformatics/17.9.847.
Punta M, Coggill PC, Eberhardt RY, Mistry J, Tate J, Boursnell C, Pang N, Forslund K, Ceric G, Clements J, et al: The Pfam protein families database. Nucleic Acids Res. 2012, 40: D290-D301. 10.1093/nar/gkr1065.
Haft DH, Selengut JD, White O: The TIGRFAMs database of protein families. Nucleic Acids Res. 2003, 31: 371-373. 10.1093/nar/gkg128.
Letunic I, Doerks T, Bork P: SMART 7: recent updates to the protein domain annotation resource. Nucleic Acids Res. 2012, 40: D302-D305. 10.1093/nar/gkr931.
Bru C, Courcelle E, Carrere S, Beausse Y, Dalmar S, Kahn D: The ProDom database of protein domain families: more emphasis on 3D. Nucleic Acids Res. 2005, 33: D212-D215.
Sigrist CJ, Cerutti L, de Castro E, Langendijk-Genevaux PS, Bulliard V, Bairoch A, Hulo N: PROSITE, a protein domain database for functional characterization and annotation. Nucleic Acids Res. 2010, 38: D161-D166. 10.1093/nar/gkp885.
Wu CH, Nikolskaya A, Huang H, Yeh LS, Natale DA, Vinayaka CR, Hu ZZ, Mazumder R, Kumar S, Kourtesis P, et al: PIRSF: family classification system at the protein information resource. Nucleic Acids Res. 2004, 32: D112-D114. 10.1093/nar/gkh097.
Lees J, Yeats C, Perkins J, Sillitoe I, Rentzsch R, Dessailly BH, Orengo C: Gene3D: a domain-based resource for comparative genomics, functional annotation and protein network analysis. Nucleic Acids Res. 2012, 40: D465-D471. 10.1093/nar/gkr1181.
Wilson D, Pethica R, Zhou Y, Talbot C, Vogel C, Madera M, Chothia C, Gough J: SUPERFAMILY–sophisticated comparative genomics, data mining, visualization and phylogeny. Nucleic Acids Res. 2009, 37: D380-D386. 10.1093/nar/gkn762.
Mi H, Dong Q, Muruganujan A, Gaudet P, Lewis S, Thomas PD: PANTHER version 7: improved phylogenetic trees, orthologs and collaboration with the Gene Ontology Consortium. Nucleic Acids Res. 2010, 38: D204-D210. 10.1093/nar/gkp1019.
Flutre T, Duprat E, Feuillet C, Quesneville H: Considering transposable element diversification in de novo annotation approaches. PLoS One. 2011, 6: e16526-10.1371/journal.pone.0016526.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignment search tool. J Mol Biol. 1990, 215: 403-410.
Quesneville H, Nouaud D, Anxolabehere D: Detection of new transposable element families in Drosophila melanogaster and Anopheles gambiae genomes. J Mol Evol. 2003, 57 (Suppl 1): S50-S59.
Ellinghaus D, Kurtz S, Willhoeft U: LTRharvest, an efficient and flexible software for de novo detection of LTR retrotransposons. BMC Bioinformatics. 2008, 9: 18-10.1186/1471-2105-9-18.
Price AL, Jones NC, Pevzner PA: De novo identification of repeat families in large genomes. Bioinformatics. 2005, 21 (Suppl 1): i351-i358. 10.1093/bioinformatics/bti1018.
Edgar RC, Myers EW: PILER: identification and classification of genomic repeats. Bioinformatics. 2005, 21 (Suppl 1): i152-i158. 10.1093/bioinformatics/bti1003.
Wicker T, Sabot F, Hua-Van A, Bennetzen JL, Capy P, Chalhoub B, Flavell A, Leroy P, Morgante M, Panaud O, et al: A unified classification system for eukaryotic transposable elements. Nat Rev Genet. 2007, 8: 973-982. 10.1038/nrg2165.
Benson G: Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999, 27: 573-580. 10.1093/nar/27.2.573.
Kolpakov R, Bana G, Kucherov G: mreps: Efficient and flexible detection of tandem repeats in DNA. Nucleic Acids Res. 2003, 31: 3672-3678. 10.1093/nar/gkg617.
Marchler-Bauer A, Anderson JB, Derbyshire MK, DeWeese-Scott C, Gonzales NR, Gwadz M, Hao L, He S, Hurwitz DI, Jackson JD, et al: CDD: a conserved domain database for interactive domain family analysis. Nucleic Acids Res. 2007, 35: D237-D240. 10.1093/nar/gkl951.
Kohany O, Gentles AJ, Hankus L, Jurka J: Annotation, submission and screening of repetitive elements in repbase: repbase submitter and censor. BMC Bioinformatics. 2006, 7: 474-10.1186/1471-2105-7-474.
Kapitonov VV, Tempel S, Jurka J: Simple and fast classification of non-LTR retrotransposons based on phylogeny of their RT domain protein sequences. Gene. 2009, 448: 207-213. 10.1016/j.gene.2009.07.019.
Yuan YW, Wessler SR: The catalytic domain of all eukaryotic cut-and-paste transposase superfamilies. Proc Natl Acad Sci USA. 2011, 108: 7884-7889. 10.1073/pnas.1104208108.
Kapitonov VV, Jurka J: A universal classification of eukaryotic transposable elements implemented in Repbase. Nat Rev Genet. 2008, 9: 411-412. 10.1038/nrg2165-c1.
Kodama Y, Shumway M, Leinonen R: The sequence read archive: explosive growth of sequencing data. Nucleic Acids Res. 2012, 40: D54-D56. 10.1093/nar/gkr854.
Apis mellifera 454 Transcriptome BioProjects.http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/bioproject/?term=PRJNA51481+OR+PRJNA51483,
Funding for the project was provided by a grant to RG from the National Human Genome Research Institute, National Institutes of Health (NHGRI, NIH) U54 HG003273. Contributions from members of the CGE lab were supported by Agriculture and Food Research Initiative Competitive grant no. 2010-65205-20407 from the USDA National Institute of Food Agriculture. AKB was supported by a Clare Luce Booth Fellowship at Georgetown University. The authors are grateful for the HGSC sequence production teams (Patil,S., Gubbala,S., Aqrawi,P., Arias,F., Bess,C., Blankenburg,K.B., Brocchini,M., Buhay,C., Challis,D., Chang,K., Chen,D., Coleman,P., Drummond,J., English,A., Evani,U., Francisco,L., Fu,Q., Goodspeed,R., Haessly,T.H., Hale,W., Han,H., Holder,M., Hu,Y., Jackson,L., Jakkamsetti,A., Jayaseelan,J.C., Kakkar,N., Kalra,D., Kandadi,H., Lee,S., Li,H., Liu,Y., Macmil,S., Mandapat,C.M., Mata,R., Mathew,T., Matskevitch,T., Munidasa,M., Nagaswamy,U., Najjar,R., Nguyen,N., Niu,J., Opheim,D., Palculict,T., Paul,S., Pellon,M., Perales,L., Pham,C., Pham,P., Pu,L.-L., Qi,S., Qu,J., Ren,Y., Ruth,R.T., Saada,N., Sabo,A., San Lucas,F., Sershen,C., Shafer,J., Shah,N., Shelton,R., Song,X.-Z., Tabassum,N., Tang,L., Taylor,A., Taylor,M., Velamala,V., Wan,Z., Wang,L., Wang,Y., Warren,J., Weissenberger,G., Wilczek-Boney,K.B., Yao,J., Yin,B., Yu,J., Zhang,J., Zhang,L., Zhou,C., Zhu,D., Zhu,Y., and Zou,X.), and the input of other members of the HGSC genome assembly team.
The authors declare that they have no competing interests.
Manuscript: CGE1, 2, KCW3, AKB2. Human Genome Sequencing Center Director: RAG3. Honey Bee Genome Phase II White Paper Authors: JDE10, MB4, CGE1, 2, RM20, HMR24, GER25, DBW30, CWW31. Sequence production: YW3 (cDNA sequencing libraries at BCM-HGSC), IFN3 (cDNA sequencing libraries at BCM-HGSC), CLK3, MH3, VJ3, DMM3, HGSC production teams3, GER25 (cDNA sequencing at U. Illinois). cDNA: RM20 (Brain & Ovary, Testes, Mixed Antennae, Embryos, Larvae), GER25 (Queen Ovary, Nurse, Forager), MEH14 (Nurse and Forager Brain), RSK17 (Nurse and Forager Brain), JDE10 (Abdomen), JD3 (transcript analysis and assembly), DZ3 (transcript analysis). Genome Assembly: KCW3, LZ3, HJ16, JD3. Genetic Map: GJH15, JMT28, JM19, OR26, ES21. Gene Annotation: CGE1, 2 (N-Scan, MAKER, GLEAN), AKB2 (N-Scan, MAKER), TDM23 (RefSeq, Gnomon), FC5 (SGP2, GeneID), RG5 (SGP2, GeneID), KJH13 (AUGUSTUS), PK18 (Fgenesh++), VS27 (Fgenesh++), MS13 (AUGUSTUS). OGS Evaluation and Characterization: CGE1, 2, AKB2. GC Composition: CGE1, 2, AKB2, EE9, DG12, JTR2, 6. Orthology Assessment: RMW29, EMZ29. Protein Functional Analysis (GO and InterPro): CGE1, 2. Genomic Repetitive Elements: ES21, RFAM21. Peptide data and analysis: MVV7 (venom peptides), LJF11 (PeptideAtlas), GD8 (venom peptides), BD8 (venom peptides), DCdG7 (venom peptides). Genome Browser, BLAST Website and Manual Annotation Software: CGE1, 2, AKB2, CPC2, 6, MCM-T2, 22, JTR2, 6. All authors read and approved the final manuscript.
Christine G Elsik, Kim C Worley, Anna K Bennett contributed equally to this work.
Electronic supplementary material
Additional file 1:Is a document containing Tables S1 through S7 and Figure S1. Table S1. provides details for genomic sequencing runs, listed by SRA run number. Table S2. provides a comparison of New and Previously Known OGSv3.2 genes based on relaxed mapping criteria. Table S3. provides a comparison of frequencies of canonical and non-canonical splice sites in New and Previously Known genes. Table S4. provides the number of genes overlapping expressed sequence alignments for different transcript libraries. Table S5, provides counts of near-universal insect orthologous groups that are missing orthologs in each species. Table S6. provides evidence and sampling options used for the three AUGUSTUS gene sets AU9, AU11, and AU12. Table S7. provides gene prediction accuracy of GeneID and SGP2 on an A. mellifera artificial contig. Figure S1. shows the proportions of different transposable element groups in the A. mellifera genome. (DOCX 233 KB)
About this article
Cite this article
Elsik, C.G., Worley, K.C., Bennett, A.K. et al. Finding the missing honey bee genes: lessons learned from a genome upgrade. BMC Genomics 15, 86 (2014) doi:10.1186/1471-2164-15-86
- Apis mellifera
- GC content
- Gene annotation
- Gene prediction
- Genome assembly
- Genome improvement
- Genome sequencing
- Repetitive DNA