- Research article
- Open Access
RNA-Seq analysis and transcriptome assembly for blackberry (Rubus sp. Var. Lochness) fruit
© Garcia-Seco et al.; licensee Biomed Central. 2015
- Received: 30 June 2014
- Accepted: 22 December 2014
- Published: 22 January 2015
There is an increasing interest in berries, especially blackberries in the diet, because of recent reports of their health benefits due to their high content of flavonoids. A broad range of genomic tools are available for other Rosaceae species but these tools are still lacking in the Rubus genus, thus limiting gene discovery and the breeding of improved varieties.
De novo RNA-seq of ripe blackberries grown under field conditions was performed using Illumina Hiseq 2000. Almost 9 billion nucleotide bases were sequenced in total. Following assembly, 42,062 consensus sequences were detected. For functional annotation, 33,040 (NR), 32,762 (NT), 21,932 (Swiss-Prot), 20,134 (KEGG), 13,676 (COG), 24,168 (GO) consensus sequences were annotated using different databases; in total 34,552 annotated sequences were identified. For protein prediction analysis, the number of coding DNA sequences (CDS) that mapped to the protein database was 32,540. Non redundant (NR), annotation showed that 25,418 genes (73.5%) has the highest similarity with Fragaria vesca subspecies vesca. Reanalysis was undertaken by aligning the reads with this reference genome for a deeper analysis of the transcriptome. We demonstrated that de novo assembly, using Trinity and later annotation with Blast using different databases, were complementary to alignment to the reference sequence using SOAPaligner/SOAP2. The Fragaria reference genome belongs to a species in the same family as blackberry (Rosaceae) but to a different genus. Since blackberries are tetraploids, the possibility of artefactual gene chimeras resulting from mis-assembly was tested with one of the genes sequenced by RNAseq, Chalcone Synthase (CHS). cDNAs encoding this protein were cloned and sequenced. Primers designed to the assembled sequences accurately distinguished different contigs, at least for chalcone synthase genes.
We prepared and analysed transcriptome data from ripe blackberries, for which prior genomic information was limited. This new sequence information will improve the knowledge of this important and healthy fruit, providing an invaluable new tool for biological research.
- de novo
- Alternative splicing
The Rosaceae comprise a moderately large family, with an estimated 85 genera and approximately 2,000 sexual species , that include several economically and nutritionally important crops cultivated worldwide, such as apples (Malus domestica L.), plums (Prunus domestica L.), pears (Pyrus communis L.), cherries (Prunus avium L.) and peaches (Prunus persica L. Batsch.).
Among the Rosaceae are blackberries (Rubus spp), with growing market interest due to recent discoveries about the beneficial effects of polyphenols for human health [2,3]. Therefore, increasing polyphenol levels will likely result in healthier fruits. However, despite the agricultural and biological importance of Rubus, knowledge of the genetics and genome is limited. So far, genomic efforts have focused largely on other Rosaceae, including apple (Malus x domestica), strawberry (Fragaria vesca), peach (Prunus persica) and pear (Pyrus communis) for which whole genome sequencing has been completed by combining traditional Sanger, Roche and next-generation Illumina GA sequencing technologies [4-7]. Many genomic resources for these Rosaceae species are available on the Genome Database for Rosaceae website .
The genus Rubus is classified into 12 subgenera, and at the same time is divided into sections or subseries. Economically, the most important subgenus is Rubus, with more than 130 species [9-11]. During the domestication of blackberries, parentals with desirable traits such as large, sweet fruits, thornlessness and high yield have been hybridised, resulting in complex hybrids comprising elite commercial lines.
The variety Rubus spp. var. Lochness is a high yielding tetraploid (4n = 28) blackberry, and one of the most widely cultivated varieties. Its origin is Scottish, with parents SCRI 74126RA8 x SCRI 75131D2 hybrid complex, obtained in 1998 in Invergowrie, Scotland, by the Scottish Crop Research Institute . It is a mixture of races, among which the most prominent are “Comanche” and “Merton Thornless”. The parents came from Scotland and North America, and include European species; Rubus ulmifolius, R. trivialis, R. strigosus, and R. armeniacus. Commercially, the term often used is fruticosus, although from a botanical point of view, it is more accurately described as Rubus spp. var. Loch Ness.
The lack of dense genetic maps, large high-throughput marker collections, and suitable mapping populations has limited gene isolation and breeding in blackberry. Several Rubus genes have been reported, mainly related to fruit quality, especially genes encoding the enzymes of phenylpropanoid metabolism, and resistance to diseases [13-19], but most of these are derived from raspberry (Rubus idaeus) and none of them have been cloned and characterized molecularly in blackberry.
Currently, there are more than 74.2 million ESTs in the NCBI public collection . However, less than 3,200 EST sequences are available collectively for all the Rubus species, and approximately 540,000 for all the species in the Rosaceae family, compared to more than 1.8 and 2 million ESTs available for Arabidopsis and Zea mays, respectively.
RNA-Seq is a powerful tool for transcriptome analysis and uses deep-sequencing technologies to produce millions of short cDNA reads. The resulting reads are either aligned to a reference genome or reference transcripts, or assembled de novo (without the genomic sequence) to produce a genome-scale transcription map that consists of both the transcript structure and level of expression for each gene at any particular developmental stage [21-25].
Here, we describe the generation of almost 9 billion nt bases using Illumina RNA-Seq technology, and the detection of 42,062 consensus sequences. These sequences are functionally annotated and represent the first Rubus sp. transcriptome. We show that de novo assembly using Trinity  and a later annotation with BLAST interrogation of different databases is complementary to alignment to a reference sequence with SOAPaligner/SOAP2 , using as a reference, the genome sequence a species of the same family (Rosaceae), but a different genus, Fragaria. Access to the sequence of the ripe blackberry transcriptome will accelerate genetic analysis and breeding of this crop and facilitate attempts to improve fruit quality based on secondary metabolite accumulation, and improved field performance within more sustainable production.
We have demonstrated the suitability of short-read sequencing for de novo assembly and annotation of genes without prior genome information, as well as its reliability and complementarity by alignment with sequence from a close, but distinct, species. Our results will facilitate the discovery of new functional genes in Rubus sp. Based on this background, the aim of this study was founded on i) the importance of the transcriptome to improvement of fruit quality dependent on secondary metabolite content, which will be useful for breeders and biotechnologists, and ii) comparison of bioinformatic approaches to study a new transcriptome, with little or no pre-existing information of its genome.
Sample preparation and Illumina sequencing
Summary of de novo assembly of transcriptome sequence reads without reference genome
Total raw reads
Total clean reads
Total clean nucleotides (nt)
Type of gene detected
Total length (nt)
Mean length (nt)
48 335 970
44 166 280
4 416 628 000
32 762 368
37 272 781
49 872 928
45 562 458
4 556 245 800
33 018 028
37 472 313
The two independent samples, (RF1 and RF2) were collected and, after DNase treatment, RNA integrity was confirmed using a triple check, Nanodrop™, Experion™ Automated Electrophoresis System, and gel electrophoresis.
De novo assembly of sequence reads without a reference genome
Reads were assembled using Trinity  and then, sequences were clustered using the TIGR Gene Indices clustering tools (TGICL). TGICL  was used to join further sequences and remove any redundant sequences.
So, the result of clustering was that from 68,768 and 68,357 raw sequence reads were generated; after clustering 41,770 and 41,881 total consensus sequences were generated respectively (Table 1).
Gene family clustering was performed such that the consensus sequences were divided into two classes. One class comprised clusters, for which the prefix CL followed by the cluster id and the number of contigs in each cluster was given (Additional file 1: Table S1). In any one cluster, there were several consensus sequences for which similarity between the consensus sequences was more than 70%. The other class comprised singletons, for which the prefix Unigene was given.
Altogether, considering both repetitions, 42,062 different consensus sequences were detected. Among them 21,903 were singletons, and 20,159 others were grouped into 7,610 different clusters.
The diagram in Additional file 2 shows the distribution of raw sequences and of the consensus sequence lengths ranging from 200 bp to more than 3,000 bp in both samples. The most abundant raw sequences were 200 bp (over 38,000) and the least abundant were 3000 bp (121); sequences over 3000 bp were grouped together. For the consensus sequences, the most abundant were 200 bp (over 7000), and the least abundant were 300 bp (150). The number of sequences decreased as the length increased (Additional file 2).
Consensus sequences were aligned with Blastdb using Blastx (evalue < 0.00001) . Sequence orientations were determined according to the best hit in the database. The orientation and CDS of sequences that had no hit in blast were predicted using ESTScan .
Annotation and classification of Rubus sp. consensus sequences
For annotation, the consensus sequences were first searched using BLASTX against the NCBI ‘non-redundant’ database (Nr)  using a cut-off E-value of 0.000001.
To search for the maximum number of similar genes, after using the Nr database, the NCBI’s NT database , Swiss Institute of Bioinformatics databases (Swiss-Prot) , Kyoto Encyclopedia of Genes and Genomes (KEGG) , Clusters of Orthologous Groups of proteins (COG) , Gene Ontology (GO)  databases were used. First, several databases were used to annotate each gene. In each database, two criteria were used, the score and the evalue. The evalue was set to discard alignments with statistical significance (NCBI minimum score = 58, evalue = 0.000001; and Swissprot minimum score = 30, evalue = 0.00001). Each gene was analyzed independently, and the annotation was made according to these criteria; these data are shown in Additional file 1. The KEGG PATHWAY database records networks of molecular interactions in cells, and variants of them, specific to particular organisms. Pathway-based analysis helped to understand further the biological functions of genes. Pathway information for all annotated sequences was obtained from KEGG pathway annotations.
COG is a database where orthologous gene products are classified. Every protein in COG is assumed to have evolved from an ancestral protein, and the whole database is built on genes encoding proteins from species with complete genome sequences as well as the evolutionary relationships between bacteria, algae and eukaryotes. All consensus sequences were aligned to the COG database to predict and classify possible functions. It was possible to get Gene Ontology (GO) functional annotation from the NR annotation. GO offers three ontologies: molecular function, cellular component and biological process. The basic unit of GO is the GO-term. Every GO-term belongs to a type of ontology. Based on the NR annotation, the Blast2GO program was used  to get the GO annotation of all consensus sequences. WEGO software  was then used for GO functional classification and to understand the distribution of gene functions of the species at a macro level.
For functional annotation, 33,040, 32,762, 21,932, 20,134, 13,676, 24,168 consensus sequences were annotated using the NR, NT, Swiss-Prot, KEGG, COG, GO databases, respectively; in total 34,552 annotated sequences were identified. For protein prediction analysis, the number of CDS that mapped to the protein database was 32,540.
Summary of annotations of assembled Rubus sp. consensus sequences
Number of genes
Fragaria vesca subsp. vesca
Populus balsamifera subsp. trichocarpa
To identify active biological pathways in ripe fruit of Rubus sp., the sequences were mapped to the reference canonical pathways in the Kyoto Encyclopedia of Genes and Genomes.
(KEGG). In total, 20,134 sequences were assigned to 128 KEGG pathways. The pathways with most representation were “metabolic pathways” (4,371 members), “Biosynthesis of secondary metabolites” (2,005 members), “plant-pathogen interaction” (1,471 members) and “RNA transport” (1,011 members) (Additional file 1). The 2,005 genes in the “Biosynthesis of secondary metabolites” category expressed in blackberry fruits will be useful for defining metabolic pathways for synthesis and turnover of compounds potentially beneficial to human health, and modifiable by plant breeding in Blackberry.
To further differentiate the NCBI nucleotide sequences and assembled sequences at the protein level, COG classification was undertaken to analyse the NCBI sequences.
The 13,676 assembled sequences were divided into 25 clusters according to NCBI COG classification (Additional file 3). The groups with the highest representation were found in the clusters R “general function prediction only”, K “transcription” and L “replication, recombination and repair” (Additional file 3).
To determine differential expression, once all reads were assembled and annotated, each gene expression level was normalized to its length for each replicate (C1 and C2). The gene expression level was calculated by using RPKM method  (Reads per kilobase transcriptome per million mapped reads), with the following formula: RPKM = 106C/(NL/103) which defines the expression of gene A , where C is the number of reads that are uniquely aligned to gene A , N is the total number of reads that are uniquely aligned to all genes, and L is the number of bases in gene A. The RPKM method is able to eliminate the influence of different gene lengths and sequencing discrepancies in the calculation of gene expression. Therefore, the calculated gene expression can be used directly for comparing the difference of gene expression among samples. Normalized data from C1 was plotted against data from C2; low dispersion in the plot indicated high repetitivity in expression between samples. Gene expression levels showed high similarity between biological replicates, RF1 and RF2 (Additional files 3 and 4). Most genes showed no significant differences between the samples, suggesting the results were reliable. Therefore, the calculated FPKM gene expression values can be directly compared between genes and, for any given gene, between samples.
Finally, SSRs were detected using MISA software , using the sequences as a reference (Additional file 5). Predominant SSRs were dinucleotides (over 4000), followed by trinucleotides (over 3000), mononucleotides (1200), hexanucleotides (365) and similar amounts of tetra and pentanucleotides (Additional file 5). Despite the importance of these sequences to predict variability in different organisms  no further analysis has been undertaken with these data in the present study, but the sequences are available in EBI databases (PRJEB6680), to use as markers for improvement of blackberry quality. Such SSRs will be useful as molecular markers for assaying the functional diversity in natural populations or germplasm collections, evolutionary studies and for breeding projects.
De novo assembly of sequence reads using the reference genome from strawberry
Since the species distribution of NR annotation showed that 25,418 genes (77,5%) had the highest similarity with Fragaria vesca subspecies vesca, a reanalysis was carried out, aligning the blackberry reads to this reference genome to obtain a more accurate analysis of the ripe blackberry transcriptome.
Primary sequencing data produced by Illumina HiSeq TM 2000, (raw reads), was subjected to quality control (QC), to determine whether a resequencing step was needed. Raw reads were filtered into clean reads and aligned to the reference sequences with SOAPaligner/SOAP2 . Then, the distribution of reads on reference genes and coverage analysis was done. The quality control was positive for both samples (Additional file 6), and therefore further analysis was undertaken.
Summary of de novo assembly of transcriptome sequence reads with reference genome
Genome map rate
Gene map rate
Comparison of strategies used to analyse the blackberry transcriptome de novo
Our initial analysis strategy (alignment using blastx with any plant sequence in the databases) produced a large number of annotated genes: 34,552 from a total of 42,062 assembled genes (82.14% of genes). This provides a significant database for berry breeders. All the classifications (COG, KEGG, etc.) provide new tools and resources for research on fruit development and bioactives. However, functional assignment of genes based on similarity to genes in other plant species should be undertaken with caution, especially if the comparator species are taxonomically distant from blackberry, such as Populus balsamifera subsp. Trichocarpa, Medicago truncatula, Lycopersicon esculentum, which all showed some genes with high similarity to those of blackberry (147, 139 and 107 genes respectively).
The second analysis (alignment with the closest sequenced genome Fragaria vesca subspecies vesca) resulted in a lower number of expressed genes, 12,077. Since very high stringency was set for this alignment with strawberry (on average less than 5 mismatches per gene), it is very likely that matched sequences have equivalent functions in the two species.
The combination of the two strategies for assembly and analysis of RNA-seq data adds value to the dataset for diverse applications.
Study of putative chimeras
Rubus sp. Var Lochness is a tetraploid hybrid , and consequently there is a risk of chimeric contigs from assembling the NGS data. However, Trinity is reliable in assembling genes from different chromosomes and avoiding chimeras, especially when the hybrid has been derived from different species .
To test for putative chimeras, the CDS of one gene encoding Chalcone Synthase (CHS) was selected as a representative example for its role in biosynthesis of flavonols and anthocyanins, that are greatly accumulated in blackberries. The CDS was cloned from fresh tissue by designing primers (Additional file 8) for both ends of the known sequence; the CDS were cloned in pGEMT and several clones were sequenced.
All the sequences from the clones aligned with high scores (99%) with the two CHS contigs from the RNAseq data; however 33 nucleotides were different (2.9%) (Additional file 9) between the cloned sequences and the CHS contigs. These differences could be due to SNPs or to errors introduced during amplification by PCR or during the sequencing the genes. These sequence differences were clustered around 500 nucleotides from each end of the CDS.
Despite the high reliability of the software used to align the sequences to distinguish homologs of different chromosomes  and our results, that suggest that CHS is not chimeric, this represents a single test case, and a deeper analysis on more genes should be carried out, to rule out the occurrance of chimeric genes resulting from mistakes in alignment of transcripts in this tetraploid variety.
Expression of the contigs estimated by qRT-PCR
RNA-seq analysis showed that more than 13,000 genes of the blackberry transcriptome are clustered in different contigs. This could be problematic for primer design for RT-qPCR analysis, since design of primers that amplify only one of the contigs encoding a specific protein, instead of all the copies of that gene, could give misleading expression data. To check if this is a real problem, three pairs of primers were designed for the CHS gene. The first two pairs were designed using the zone with high SNP frequency between the two contigs encoding CHS in blackberry (the first 500 bp, Additional file 9). Consequently, these primers should monitor the transcript levels of each contig encoding CHS but not the combined expression of both genes (Additional file 8). The third pair of primers was designed within the sequence conserved between the two genes; accordingly this third pair should report the total expression of the CHS genes.
Although these studies represent assays of a single gene for chimeras, the degree of polymorphism between the two CHS contigs was such (10 mismatches per contig of 1200 nt) that data on this gene likely represent the top end of the problem, where single nucleotide differences would impact the proteins encoded, since on average 5SNPs were found per contig. Consequently chimeras existing in other contig pairs are less likely to impact the sequence of the encoded protein than for CHS.
The blackberry transcriptome data provide a resource that will enhance comparative studies between different berry crops which are of increasing economic and social importance due to their healthy properties. Consequently these transcriptome data and analyses provide an important new resource for biological research. The genes we have identified provide candidates for resistance genes against RNA viruses, fungal or bacterial pathogens as well as many genes encoding enzymes of flavonoid metabolism which are key to the health-promoting effects of many berries. The SSRs and SNPs identified here will constitute an important resource for mapping and marker-assisted breeding of ripe fruit quality traits in Rubus sp. and closely related crop species.
Two different strategies have been used to analyse sequence, assemble and annotate a new transcriptome de novo without a reference genome or transcriptome. We have demonstrated that the techniques are both robust and complementary and should be used in accordance with the research objectives. We show that the transcriptome of a non-model polyploid species, in this case, a tetraploid, can be sequenced, assembled and annotated avoiding high levels of artificial chimeras. The analysis of expression of several contigs of the same gene can inform expression analyses of both individual genes and all the genes encoding proteins of particular interest.
Plant materials and RNA isolation
The Rubus sp. var. Lochness plants used in this study were planted at production fields of the company Agricola El Bosque (Lucena del Puerto, Huelva, Spain). Plants and greenhouses were kindly provided by the company and all were handled according to regular agricultural practices . Plants were grown under “winter cycle” that is, after an artificial cold period, from July to November 2013 under natural light conditions.
Prior to RNA extraction, samples were removed from the −80°C freezer and ground to a fine powder with liquid nitrogen using a sterilized mortar and pestle Total RNA was isolated from red fruits with PureLink™ Micro-to-Midi Total RNA Purification System (Invitrogen™), and after DNase treatment and confirmation of RNA integrity using a triple check, Nanodrop™, Experion™ Automated Electrophoresis System, and gel electrophoresis, the total RNA was used in mRNA preparation, fragmentation and cDNA synthesis.
Beads with oligo(dT) were used to isolate poly(A) mRNA from total RNA (Qiagen GmbH, Hilden, Germany).
Synthesis of cDNA and sequencing
RNA-seq library preparation and sequencing was carried out by Beijing Genomics Institute BGI (Hong-Kong, China). Following purification, the mRNA was fragmented using divalent cations at elevated temperature. Taking these short fragments as templates, the first-strand cDNA was synthesized using random hexamer primers and Superscript TM III (Invitrogen™, Carlsbad, CA, USA). The second strand cDNA was synthesized using buffer, dNTPs, RNaseH and DNA polymerase I. Short fragments were purified with a QiaQuick PCR extraction kit (Qiagen) and resolved with EB buffer for end reparation and poly(A) addition. The short fragments were then connected using sequencing adapters.
After agarose gel electrophoresis, suitable fragments were used as templates for PCR amplification. During the QC steps, an Agilent 2100 Bioanaylzer and an ABI StepOnePlus Real-Time PCR System were used in quantification and qualification of the sample library. Finally, the library (200 bp insert) was sequenced using Illumina HiSeqTM 2000 (Illumina Inc., San Diego, CA, USA). The paired-end library was prepared following the protocol of the Illumina TruSeq RNA Sample Preparation Kit (Illumina). The library was linked to a paired-end flow cell containing complementary adapters, and then bound fragments were amplified to create overlapping “clusters”. The adapters were designed to allow selective cleavage of the forward DNA strand after resynthesis of the reverse strand during sequencing. The copied reverse strand was then used to sequence from the opposite end of the fragment. The raw reads were cleaned by removing adaptor sequences, empty reads and low quality sequences.
Transcriptome de novo assembly
Two different strategies were followed to assemble the transcriptome; 1) de novo assembly using Trinity  and a later annotation with Blast using different databases, 2) aligning the raw data to the reference sequence with SOAPaligner/SOAP2 , using as the reference the sequence of wild strawberry (Fragaria vesca subesp. vesca) a species of same family (Rosaceae), but from a different genus, Fragaria.
In undertaking the first analysis, there was no reference genome for the alignment of the sequenced reads. The RNA-Seq reads were assembled into transcripts using Trinity , a reference genome-independent assembler . The transcript identification by Trinity is divided into three steps: Inchworm, Chrysalis and Butterfly. Together, they assemble the RNA-seq reads into sequences, cluster the sequences, construct de Bruijn graphs  for each cluster (representing the transcriptional complexity for a gene), partition the reads among each graph, and finally trace the paths in each graph to report full-length transcripts, for alternatively spliced isoforms as well as for paralogous genes. Trinity has been found to efficiently reconstruct the transcriptome, inclusive of the splicing events and transcripts resulting from recent duplication events, better than other available de novo transcriptome assemblers .
For the second strategy, the strawberry genome and gene information were downloaded from the Washington State University and Clemson University website (http://www.rosaceae.org), funded by the 2009 USDA NIFA Specialty Crop Research Initiative Program. Sequencing-received raw image data were transformed by base culling into sequence data. De novo transcriptome assembly was aligned to the wild strawberry genome (Fragaria vesca subesp. vesca) using the assembling program SOAPaligner/SOAP2 ; all genes with more than five mismatches were discarded from analysis.
Annotation and classification of consensus sequences
Sequences were used for BLAST searches and annotation against an NCBI Nr protein database (NCBI non-redundant sequence database) using an E-value cut-off of 0.00001 (E-value ≤ 0.00001). Consensus sequences were further aligned by BLASTX to protein databases such as Swiss-Prot, KEGG and COG, retrieving proteins with the highest sequence similarity with the given sequences along with the functional annotations for their proteins. If results of different databases conflicted, a priority order of Nr, Swiss-Prot, KEGG and COG was followed.
The coding region sequences were then determined for proteins with the highest ranks using BLAST. The Blast2GO program was used to obtain GO annotations for the sequences, as well as for KEGG and COG analysis . The WEGO software was then used to perform GO functional classification of all sequences to view the distribution of gene functions of the species at the macro level . The analysis mapped all of the annotated sequences to GO terms in the database and calculated the number of sequences associated with every term.
The gene expression level was calculated by using RPKM method  (Reads per kilobase transcriptome per million mapped reads), and the formula is as follows: RPKM = 106C/(NL/103). Given to be the expression of gene A, C to be number of reads that are uniquely aligned to gene A , N to be total number of reads that are uniquely aligned to all genes, and L to be number of bases on gene.
Study of putative chimeras
The Chalcone synthase gene that was sequenced by RNA-seq was isolated from blackberry fruit tissue using the primers shown in Additional file 8. Primer design used the online software Primer 3 Plus . First strand cDNA was synthesised using SuperScript™ III (Invitrogen) with 1–2 μg of total RNA accoding to the manufacturer’s instructions. The cDNA product was diluted to 10 ng/μg based on the initial amount of RNA.
PCR reactions were undertaken using G-Storm Thermal Cycler (Kapa Biosystems). The reaction mixture normally consisted of 10–20 ng of DNA template, 0.1 μM each of the forward and reverse primer, 100 μM of dNTPs, Taq DNA polymerase (1 unit) and Taq buffer in a total volume of 15 μL. The standard PCR protocol was: initial denaturation (4 min at 94°C), followed by 25–35 cycles of denaturation (45 seconds at 94°C), annealing (30 seconds at 60°C) and extension (60 seconds at 72°C), and final extension( 5 minutes at 72°C). For cloning PCR procedure, the protocol was similar to that described above except a tiny amount of bacterial colony was used to replace the template DNA. To purify DNA from PCR reactions, a QIAquick PCR Purification Kit (Qiagen) was used.
Heat shock transformation was used to transform E.coli (DH5α) cells with desired plasmids. Plasmid DNA was isolated from 3–5 mL of culture grown overnight under the appropriate antibiotic selection. Plasmid DNA isolation was done using QIAprep® Miniprep Kit (Qiagen). The concentration of DNA and RNA were quantified by using a NanoDrop 2000C UV–vis Spectrophotometer (Thermo). Once the plasmid was isolated, it was sequenced by Eurofins Genomics (UK).
RT-qPCR of gene expression during the three stages of blackberry fruit ripening
RT-qPCR was performed using SYBR® Green JumpStart™ Taq ReadyMix™ (Sigma). All RT-qPCRs were performed using an Opticon 2 Real Time PCR machine (MJ Research): 10 min at 95°C and then 40 cycles consisting of 20 sec at 95°C, 20 sec at 60°C and 20 sec at 72°C, followed by 10 min at 72°C. A gene encoding actin was used as a reference.
To evaluate RT-qPCR values, oneway analysis of variance was performed. When differences were significant, the least significant differences (LSD) post hoc test was also performed  using the software Statgraphics plus 5.1 for Windows.
Availability of supporting data
All data sets are available in the EBI database (accession number: PRJEB6680).
This research has been funded by the Ministry of Economy and Competitiveness of Spain, BES-2010-038057, and San Pablo CEU-Banco Santander fellowship. Authors thank for AGRICOLA EL BOSQUE S.L. “LA CANASTITA” for providing help in blackberry crop. YZ and CM are currently supported by the Institute Strategic Program Understanding and Exploiting Plant and Microbial Secondary Metabolism (BB/J004596/1) from the BBSRC and by the European Union FP7 ATHENA collaborative project BACterial Hosts for production of Bioactive phenolics from bERRY fruits (Grant Agreement No. 613793).
- Kalkman C. Rosaceae. In: Flowering plants · dicotyledons. Berlin Heidelberg: Springer; 2004. p. 343–86.View ArticleGoogle Scholar
- Martin C, Zhang Y, Tonelli C, Petroni K. Plants, diet, and health. Annu Rev Plant Biol. 2013;64:19–46.PubMedView ArticleGoogle Scholar
- Kaume L, Howard LR, Devareddy L. The blackberry fruit: a review on its composition and chemistry, metabolism and bioavailability, and health benefits. J Agric Food Chem. 2012;60(23):5716–27.PubMedView ArticleGoogle Scholar
- Velasco R, Zharkikh A, Affourtit J, Dhingra A, Cestaro A, Kalyanaraman A, et al. The genome of the domesticated apple (Malus domestica Borkh.). Nat Genet. 2010;42(10):833–9.PubMedView ArticleGoogle Scholar
- Shulaev V, Sargent DJ, Crowhurst RN, Mockler TC, Folkerts O, Delcher AL, et al. The genome of woodland strawberry (Fragaria vesca). Nat Genet. 2010;43(2):109–16.PubMed CentralPubMedView ArticleGoogle Scholar
- Verde I, Abbott AG, Scalabrin S, Jung S, Shu S, Marroni F, et al. The high-quality draft genome of peach (Prunus persica) identifies unique patterns of genetic diversity, domestication and genome evolution. Nat Genet. 2013;45(5):487–94.PubMedView ArticleGoogle Scholar
- Pindo M, Montanari S, Cestaro A, Velsaco R. A draft genome sequence of European pear (Pyrus communis L.‘Bartlett’). In: 6th Rosaceous Genomics Conference (RGC6), Mezzocorona (TN), 30th September-4th October 2012: 2012. 2012.Google Scholar
- Genome Database for Rosaceae (GDR). [http://www.rosaceaeorg].
- Focke WO. Species ruborum. Stuttgart: Schweizerbart; 1910.Google Scholar
- Monasterio-Huelin E. Revisión taxonómica del género Rubus L (Rosaceae) en la Península Ibérica e Islas Baleares, Thesis. Madrid, Spain: Universidad Complutense de Madrid; 1992.Google Scholar
- Alice LA, Campbell CS. Phylogeny of Rubus (rosaceae) based on nuclear ribosomal DNA internal transcribed spacer region sequences. Am J Bot. 1999;86(1):81–97.PubMedView ArticleGoogle Scholar
- Brooks RM. The brooks and olmo register of fruit & nut varieties. Alexandria, VA: Ashs Press; 1997.Google Scholar
- Kassim A, Poette J, Paterson A, Zait D, McCallum S, Woodhead M, et al. Environmental and seasonal influences on red raspberry anthocyanin antioxidant contents and identification of quantitative traits loci (QTL). Mol Nutr Food Res. 2009;53(5):625–34.PubMedView ArticleGoogle Scholar
- Zheng D, Schröder G, Schröder J, Hrazdina G. Molecular and biochemical characterization of three aromatic polyketide synthase genes from Rubus idaeus. Plant Mol Biol. 2001;46(1):1–15.PubMedView ArticleGoogle Scholar
- Zheng D, Hrazdina G. Molecular and biochemical characterization of benzalacetone synthase and chalcone synthase genes and their proteins from raspberry (Rubus idaeus L.). Arch Biochem Biophys. 2008;470(2):139–45.PubMedView ArticleGoogle Scholar
- Graham J, Smith K, MacKenzie K, Jorgenson L, Hackett C, Powell W. The construction of a genetic linkage map of red raspberry (Rubus idaeus subsp. idaeus) based on AFLPs, genomic-SSR and EST-SSR markers. Theor Appl Genet. 2004;109(4):740–9.PubMedView ArticleGoogle Scholar
- Zheng D, Hrazdina G. Cloning and characterization of an expansin gene, RiEXP1, and a 1-aminocyclopropane-1-carboxylic acid synthase gene, RiACS1 in ripening fruit of raspberry (Rubus idaeus L.). Plant Sci. 2010;179(1):133–9.View ArticleGoogle Scholar
- Kumar A, Ellis BE. A family of polyketide synthase genes expressed in ripening Rubus fruits. Phytochemistry. 2003;62(3):513–26.PubMedView ArticleGoogle Scholar
- Woodhead M, Weir A, Smith K, McCallum S, MacKenzie K, Graham J. Functional markers for red raspberry. J Am Soc Hortic Sci. 2010;135(5):418–27.Google Scholar
- Varshney RK, Graner A, Sorrells ME. Genic microsatellite markers in plants: features and applications. Trends Biotechnol. 2005;23(1):48–55.PubMedView ArticleGoogle Scholar
- Simon SA, Zhai J, Nandety RS, McCormick KP, Zeng J, Mejia D, et al. Short-read sequencing technologies for transcriptional analyses. Annu Rev Plant Biol. 2009;60:305–33.PubMedView ArticleGoogle Scholar
- Adams MD, Kelley JM, Gocayne JD, Dubnick M, Polymeropoulos MH, Xiao H, et al. Complementary DNA sequencing: expressed sequence tags and human genome project. Science. 1991;252(5013):1651–6.PubMedView ArticleGoogle Scholar
- Lister R, Gregory BD, Ecker JR. Next is now: new technologies for sequencing of genomes, transcriptomes, and beyond. Curr Op Plant Biol. 2009;12(2):107–18.View ArticleGoogle Scholar
- Wang Z, Gerstein M, Snyder M. RNA-Seq: a revolutionary tool for transcriptomics. Nat Rev Genet. 2009;10(1):57–63.PubMed CentralPubMedView ArticleGoogle Scholar
- Trapnell C, Williams BA, Pertea G, Mortazavi A, Kwan G, van Baren MJ, et al. Transcript assembly and quantification by RNA-Seq reveals unannotated transcripts and isoform switching during cell differentiation. Nature Biotechnol. 2010;28(5):511–5.View ArticleGoogle Scholar
- Grabherr MG, Haas BJ, Yassour M, Levin JZ, Thompson DA, Amit I, et al. Full-length transcriptome assembly from RNA-Seq data without a reference genome. Nature Biotechnol. 2011;29(7):644–52.View ArticleGoogle Scholar
- Li R, Li Y, Kristiansen K, Wang J. SOAP: short oligonucleotide alignment program. Bioinformatics. 2008;24(5):713–4.PubMedView ArticleGoogle Scholar
- Pertea G, Huang X, Liang F, Antonescu V, Sultana R, Karamycheva S, et al. TIGR Gene Indices clustering tools (TGICL): a software system for fast clustering of large EST datasets. Bioinformatics. 2003;19(5):651–2.PubMedView ArticleGoogle Scholar
- Altschul SF, Madden TL, Schäffer AA, Zhang J, Zhang Z, Miller W, et al. Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997;25(17):3389–402.PubMed CentralPubMedView ArticleGoogle Scholar
- Iseli C, Jongeneel CV, Bucher P. ESTScan: a program for detecting, evaluating, and reconstructing potential coding regions in EST sequences. ISMB. 1999;1999:138–47.Google Scholar
- Pruitt KD, Tatusova T, Maglott DR. NCBI reference sequences (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2007;35 suppl 1:D61–5.PubMed CentralPubMedView ArticleGoogle Scholar
- Bairoch A, Boeckmann B. The SWISS-PROT protein sequence data bank. Nucleic Acids Res. 1991;19(Suppl):2247.PubMed CentralPubMedView ArticleGoogle Scholar
- Kanehisa M, Goto S. KEGG: kyoto encyclopedia of genes and genomes. Nucleic Acids Res. 2000;28(1):27–30.PubMed CentralPubMedView ArticleGoogle Scholar
- Tatusov RL, Fedorova ND, Jackson JD, Jacobs AR, Kiryutin B, Koonin EV, et al. The COG database: an updated version includes eukaryotes. BMC Bioinformatics. 2003;4(1):41.PubMed CentralPubMedView ArticleGoogle Scholar
- Consortium GO. The Gene Ontology (GO) database and informatics resource. Nucleic Acids Res. 2004;32 suppl 1:D258–61.View ArticleGoogle Scholar
- Conesa A, Götz S, García-Gómez JM, Terol J, Talón M, Robles M. Blast2GO: a universal tool for annotation, visualization and analysis in functional genomics research. Bioinformatics. 2005;21(18):3674–6.PubMedView ArticleGoogle Scholar
- Ye J, Fang L, Zheng H, Zhang Y, Chen J, Zhang Z, et al. WEGO: a web tool for plotting GO annotations. Nucleic Acids Res. 2006;34 suppl 2:W293–7.PubMed CentralPubMedView ArticleGoogle Scholar
- Mortazavi A, Williams BA, McCue K, Schaeffer L, Wold B. Mapping and quantifying mammalian transcriptomes by RNA-Seq. Nat Methods. 2008;5(7):621–8.PubMedView ArticleGoogle Scholar
- Legendre M, Pochet N, Pak T, Verstrepen KJ. Sequence-based estimation of minisatellite and microsatellite repeat variability. Genome Res. 2007;17(12):1787–96.PubMed CentralPubMedView ArticleGoogle Scholar
- Castillo NR, Reed BM, Graham J, Fernández-Fernández F, Bassil NV. Microsatellite markers for raspberry and blackberry. J Am Soc Hortic Sci. 2010;135(3):271–8.Google Scholar
- Nakasugi K, Crowhurst R, Bally J, Waterhouse P. Combining transcriptome assemblies from multiple de novo assemblers in the allo-tetraploid plant nicotiana benthamiana. PLoS One. 2014;9(3):e91776.PubMed CentralPubMedView ArticleGoogle Scholar
- Ramos-Solano B, Garcia-Villaraco A, Gutierrez-Mañero F, Lucas J, Bonilla A, Garcia-Seco D. Annual changes in bioactive contents and production in field-grown blackberry after inoculation with Pseudomonas fluorescens. Plant Physiol Bioch. 2014;74:1–8.View ArticleGoogle Scholar
- Martin JA, Wang Z. Next-generation transcriptome assembly. Nat Rev Genet. 2011;12(10):671–82.PubMedView ArticleGoogle Scholar
- de Bruijn NG, Erdos P. A combinatorial problem. K Ned Akad Van Wet-P. 1946;49(49):758–64.Google Scholar
- Untergasser A, Nijveen H, Rao X, Bisseling T, Geurts R, Leunissen JA. Primer3Plus, an enhanced web interface to Primer3. Nucleic Acids Res. 2007;35 suppl 2:W71–4.PubMed CentralPubMedView ArticleGoogle Scholar
- Sokal RR, Rohlf F. Biometry. 2nd ed. New York: WH Feeman and Company; 1981.Google Scholar
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.