- Research article
- Open Access
Cetaceans evolution: insights from the genome sequences of common minke whales
BMC Genomics volume 16, Article number: 13 (2015)
Whales have captivated the human imagination for millennia. These incredible cetaceans are the only mammals that have adapted to life in the open oceans and have been a source of human food, fuel and tools around the globe. The transition from land to water has led to various aquatic specializations related to hairless skin and ability to regulate their body temperature in cold water.
We present four common minke whale (Balaenoptera acutorostrata) genomes with depth of ×13 ~ ×17 coverage and perform resequencing technology without a reference sequence. Our results indicated the time to the most recent common ancestors of common minke whales to be about 2.3574 (95% HPD, 1.1521 – 3.9212) million years ago. Further, we found that genes associated with epilation and tooth-development showed signatures of positive selection, supporting the morphological uniqueness of whales.
This whole-genome sequencing offers a chance to better understand the evolutionary journey of one of the largest mammals on earth.
Cetaceans (whales, dolphins and porpoises) are a group of secondarily adapted marine mammals with a history of transition from terrestrial to aquatic environments. Although the exact origin and evolutionary history of cetaceans remains unclear, a widely accepted view is that their terrestrial ancestors returned to the seas around 50 Mya (million years ago) and finally diversified into a group of fully aquatic mammals . These include nearly 85 species that can be subdivided into two suborders, the Mysticeti (baleen whales such as right whale, blue whale, humpback whale, and minke whale) and the Odontoceti (toothed whales such as sperm whales and dolphins), which arose from a common Eocene ancestor around 34 Mya. In spite of their variation in body size, all modern cetaceans are relatively similar in shape.
Aquatic life poses numerous challenges for mammals that were originally adapted for life on land . Therefore, many features that were common in land mammals have changed in the evolutionary process that led to cetaceans. Cetaceans, as a result, lack a hair coat, presumably an adaptation to reduce friction and improve locomotion, and they regulate their body temperature in energetically challenging environments for endotherms using the mechanism such as the insulating layer of adipose tissue [3,4]. Moreover, the mysticetes, compared to odontocetes, lack an adult dentition but instead acquired a novel filter feeding mechanism using baleen plates to filter feed for bulky prey, and ultimately, this key specialization, permitted the evolution of gigantic body size, a hallmark of modern baleen whales [5–7].
Recently, Yim et al.  reported the whole genome sequencing and de novo assembly of the minke whale genome that support the hypotheses regarding adaptation to hypoxic resistance, metabolism under limited oxygen conditions and the development of unique morphological traits. They used a high-depth male minke whale sequence (128× average depth of coverage) to assemble the draft genome. In addition, a high-quality draft genome and three re-sequenced genomes of baiji (Yangtze River dolphin) were reported to reveal potential molecular adaptations of cetaceans to secondary aquatic life such as a decrease in olfactory and taste receptor genes and changes in vision and hearing genes .
In this paper, we use novel methods to analyze resequencing data from four common minke whales to reveal important insights into their evolutionary history without the need for a reference sequence. We identified genes common to cetaceans with accelerated rates of evolution when compared with other mammals, which are likely to control cetacean specific traits.
Results and discussion
Genome assembly, gene prediction and variant detection
DNA from four common minke whales from the Northeast Pacific were sequenced using the Illumina HiSeq 2000 whole genome shotgun sequencing protocol. The contig information of each common minke whale sample was generated from error corrected reads using the Allpath-LG algorithm  and is described in Additional file 1: Table S1. One sample (S30) showed better assembly statistics in comparison to the other three samples. Considering the contigs longer than 2,000 bp, the genome assembly of the S30 sample had 262,747 contigs (maximum length: 105,339, N50 length: 10,321 bp, total residue count: 2,010,222,571) with 15,243 N bases. This covered approximately 67% of the estimated common minke whale genome of 3 Gbp. The various repeat elements of the genome (SINE, LINE, etc) identified by RepeatMasker are shown in Additional file 1: Table S2. Gene prediction results from masked genome sequences of each sample are described in Additional file 1: Table S3. Using the gene predictions based on Augustus  and blastp  searches, we were able to classify contigs from each sample into four categories (Additional file 1: Table S4). After merging, extension and a bridging process based on the S30 genome assembly and the three other samples, we created a consenus genome assembly of the common minke whale. The combined genome assembly had the same maximum length as the S30 genome assembly but the N50 length and average length were slightly increased to 10,400 bp and 7,727 bp, respectively. In addition, the genome coverage was increased from 67.0% to 73.7% with 23,031 genes from BlastP. Summary statistics of the combined common minke whale genome assembly are shown in Additional file 1: Table S5 and the repeat elements are described in Additional file 1: Table S6.
The results of short read mapping obtained using Bowtie2  are shown in Additional file 1: Table S7 and Additional file 1: Figure S1. Unified genotyper detected 554,937 small InDel variants and 5,137,672 Single Nucleotide Variants (SNVs). After filtering the variants, 389,542 InDels and 3,730,122 SNVs remained (detailed filtering options described in Methods). The number of variants in each sample is shown in Additional file 1: Table S8.
Comparison to the previous genome assembly analysis
The assembly metrics showed the smaller number of contigs (262,747 vs 278,792), shorter genome length (by 0.2 Gbp), more genes predicted (by 2,426), but similar proportion of repeat elements and raw reads realignment rate (approximately 91% on average) compared to the previous version of genome assembly.
We then performed re-sequencing analysis using the 1) reported draft of common minke whale genome  and 2) our assembled scaffolds as reference to call SNP genotypes of our 4 common minke whale samples to examine the concordance between two studies (Additional file 1: Table S9). The number of matched loci was 550,202 and the genotype concordance was 97.95% on average. This concordance rate may indicate that our assembly metrics are comparable to the previous study of minke whale genome with high-coverage data and various libraries.
Evolutionary phylogenetic relationships of baleen whales
Using four different methods (Bayesian coalescent approaches, Bayesian inference, maximum likelihood, and neighbor-joining methods), we reconstructed an evolutionary phylogenomic tree from 22 mitochondrial genome sequences consisting of 4 newly determined and 18 published sequences of the baleen whales (Figure 1 and Additional file 1: Figure S2 and Table S10). Kogia breviceps (Odontoceti, Kogiidae) was used as an outgroup. Common minke whales (Balaenoptera acutorostrata) diverged from a single maternal origin approximately 2.3574 (95% HPD, 1.1521 – 3.9212) Mya and were closely related to Antarctic minke whale (Balaenoptera bonaerensis). The time to the most recent common ancestor of the baleen whales was estimated to be about 28.7671 (95% HPD, 28.0336 – 31.0237).
Genes showing accelerated evolution in the common minke whale lineage
Taking into consideration the phylogenetic relationships among baleen whales, we next searched for genes that could possibly explain the specific characteristics of common minke whale. We identified 5,539 orthologous genes from 8 species (human; Homo sapiens, mouse; Mus musculus, dog; Canis familiaris, horse; Equus caballus, pig; Sus scrofa, cow; Bos taurus, dolphin; Tursiops truncatus, and common minke whale; Balaenoptera acutorostrata) to measure the rate of evolution using the ratio of nonsynonymous to synonymous substitution rate (dN/dS) analysis. Using a branch model with F3X4 codon frequencies (model = 2, NSsites = 0), we found 249 common minke whale genes that were significantly accelerated compared with the other mammal species (Figure 2). To understand the functional significance of these genes, we performed an enrichment test of Gene Ontology (GO) terms for biological processes. The genes were enriched in the function related to Wnt receptor signaling pathways (GO:0016055, P = 0.0299, 6 genes) (Additional file 1: Figure S3). The WNT gene family consists of structurally related genes that encode secreted signaling proteins. These include WNT4, WNT5A, WNT7A, WNT10b, and WNT11, and are important in skin development and also maintaining the hair-inducing activity of the dermal papilla [14,15]. In addition, SFN is a cell cycle regulator involved in epithelial keratinization and is expressed primarily in epithelial cells . A mutation in this gene was found to be responsible for the repeated epilation phenotype [16,17]. These accelerated genes may have played partial roles in the evolution of skin, hair loss, and baleen plates in baleen whales. Another interesting gene, neuropeptide Y (NPY), is a neurotransmitter in the brain and ubiquitously distributed in both the central and peripheral nervous systems . NPY is known to produce thermogenesis through brown adipose  and thus influences thermoregulation [19–21]. This gene likely reflect the physiological activities required for adaptation to underwater environment, such as cold temperature.
Genes under positive selection during speciation of dolphins and common minke whales
We then investigated the genes under positive selection between whales and dolphins using the McDonald and Kreitman test (MKT), which is one of the most powerful and extensively used tests for detecting signatures of natural selection at the molecular level . Among 11,698 orthologous genes in dolphins and common minke whales, we found evidence for significant positive selection in 13 genes (SND1, ELMSAN1, GDI1, AGA, EIF3F, GLUL, ENSTTRT00000001243, USP7, RBL2, PLK1, HPN, EGR1, and ZNF423). These genes reflect a paucity of nonsynonymous polymorphism relative to nonsynonymous divergence and thus is indicative of positive selection. Previously, EGR1 was identified as one of genes differentially expressed in bowhead whales, another baleen whale species, compared to other mammals . EGR1 encodes a zinc-finger transcription factor and regulates cell growth and differentiation [24,25]. It is highly expressed during tooth development by cells of the enamel epithelium and the dental mesenchyme, and may be a key mediator of anabolic response in cementoblasts [26,27]. RBL2 is associated with developmental delay of tooth germs and hair follicles . Mutation in AGA causes a heritable lysosome storage disorder and is associated with changes in the facial skin, dental arches and occlusion [29,30]. Mysticeti today have baleen and lack teeth as adults, whereas Odontoceti is the clade of living toothed whales . Although the roles of these genes remain incompletely understood, we speculate that this series of genes may support the transition from tooth-aided predation to filter feeding using baleen.
The draft common minke whale genome sequence supports further evolutionary and comparative genomics studies of the baleen whales. The common minke whale seems to benefit from positive selection on specific genes functioning in the hairless body and thermoregulation. The presence of this benefit is supported by the detection of higher measure of adaptive evolution in protein-coding sequences.
Comparative genomics is a promising tool for determining the genetic basis of biological functions. Sequencing more mammalian genomes will facilitate our ability to annotate the human genome more thoroughly. So far, however, only a few mammals have had their complete genomes sequenced, and clearly, more data are necessary for carrying out detailed mammalian genomics. The primary limitations are due to the extreme cost and amount of time needed to sequence and assemble very large genomes that would be suitable for such analyses . Despite relatively low sequencing depth, the assembled contigs and scaffolds of the common minke whale genome were sufficiently long to allow us to perform our gene prediction and comparative analyses. Our capability to generate and assemble a draft sequence for an entire mammalian genome indicates that such technology can be used to generate many other mammalian genome draft sequences in a time- and cost-effective manner.
The common minke whale genome provides unique insight into the origin and evolution of the baleen whale lineage, especially with continued refinements in the assembly and extensive functional analysis.
Common Minke whale genome sequencing and assembly
Four individual common minke whale samples (S30, S34, S35, and S37) were collected from the Whale Research Institute at the National Fisheries Research & Development Institute (NFRDI), Korea. The samples were caught incidentally by fishing net in Hupo, Ganggu, Pohang, and off the east coast of Korea, and were donated to NFRDI for research purposes. The process was guided and investigated by the coast guard, Cetacean Research Institute and Fisheries Cooperation Association. DNA was extracted from the muscle tissue of each common minke whale, and paired-end libraries were constructed with insert sizes of about 270 bp and 480 bp. Then 101 cycle paired-end sequencing was conducted using the Illumina HiSeq 2000 sequencer. The data are listed in Additional file 1: Table S11.
FastQC  was used to check the quality of the raw read data, and sequencing errors were discarded using the error-correction module of Allpaths-LG . Fq2fa was used to merge error-corrected paired-end reads of each sample into one shuffled-form fasta file, with a filter option for filtering N bases in the reads. We assembled error-corrected paired-end reads using IDBA_UD  with the option of pre-correction and kmin = 40. Gaps (N bases) in assembled sequences were filled using Gapcloser  with parameter k value = 31. We carried out a genome assembly for the S30 sample using CLC Assembly with minimum contig lengths = 2000, similarity = 0.85, length fraction = 0.5, insert cost = 3, deletion cost = 3, and mismatch cost = 2.
Before gene prediction of the assembled sequence, sequence patterns including repeats were screened using RepeatMasker  with mammal species and the no-low, and no-is options. Augustus  was run across the repeat masked sequence for gene prediction, and the results were used as the input for a BLASTP  search. The results of the BLASTP search were filtered by length (peptides of more than 100 amino acids) and gene coverage (over 70% without gap).
The overall processes of genome assembly and gene prediction are shown in Additional file 1: Figure S4A. To maximize the gene contents of the genome assembly and construct the representative genome assembly of the four common minke whale genomes, we combined the assembly results from each sample. The process is described in further detail in Additional file 1: Figure S4B. All predicted gene sequences (>100 amino acid sequences) were merged and used as the BLASTP DB. Next, we queried the gene sequences of each sample against the DB and filtered BLASTP results (identity > 95%, 70% < q.cov and s.cov < 130%). Every contig from each sample was classified into four groups (contigs without genes, contigs with sample-specific genes, contigs with only one gene, and contigs with multiple genes). Based on the genome assembly of the S30 sample, which showed the best result from among the four samples (N50 length, N contents, coverage, maximum contig length), we added the contigs to the sample-specific genes from the other samples. We conducted multiple sequence alignments for clustered contigs from each group (contig with only one gene and contig with multiple genes) using ClustalW . Contig extension and bridging were conducted based on the S30 contigs, or consensus sequence (if there was no S30 contig) in the cluster. The contig extension and bridging process is described in Additional file 1: Figure S5. The combined genome sequence was masked, and genes were predicted using the same process as in Additional file 1: Figure S4A.
The short reads were mapped to the combined assembled genome using Bowtie2  with the default option. Alignment of the SAM file and removal of duplicated reads were conducted using Picard (http://picard.sourceforge.net) and SAMtools . Local realignment was conducted using the Genome Analysis Toolkit (GATK)  and SNPs were extracted from the reads alignment file using UnifiedGenotyper, based on multi sample calling. Detected variants (QUAL < 30, QD < 5, FS > 200, MQ0 > 4, MQ0/DP > 0.1) and missing variants (which were found in one sample) were discarded from further analysis. The overall variant-calling process using GATK is shown in Additional file 1: Figure S4B.
Resequencing analysis based on the previously reported draft genome was performed to compare SNP genotypes of each sample that were called upon using reported draft genome and our assembled scaffolds as reference. Using LAST , we redefined the coordinate of our assembled scaffolds according to the reported draft genome. The following parameter options were adopted: ‘-c –m1111110’ and ‘-q3 –e35.’ We then isolated the loci that were exactly matched and calculated SNP genotype concordance for each sample.
The data matrix for the phylogenomic analyses consisted of four newly determined and 18 published mitochondrial genome sequences of baleen whales: 2 eschrichtiids, 14 balaenopterids, 2 neobalaenids, and 4 balaenids. Here, Kogia breviceps (Odontoceti, Kogiidae) was used as an outgroup. The mitochondrial genome sequences were initially aligned using MAFFT v6  and then corrected by visual inspection. The final alignment included 16,435 nucleotides.
The phylogenomic analysis was carried out using the BI, ML, and NJ methods. We chose the best-fit model of nucleotide substitution with the standard ModelTest PAUP block in PAUP 4.0b10  and Akaike’s information criterion (AIC) in ModelTest 3.7; GTR + I + G was selected as the best evolutionary model. The uniformed BI analysis was implemented using MrBayes 3.2.1 with the GTR + I + G model. For the partitioned model approach of BI analysis, mitochondrial genomes were divided into 18 partitions and the following models were applied: GTR + I + G for the 12S rRNA, 16S rRNA, COX1, and 22 tRNAs regions; SYM + I for the 2 STS region; TVM + I + G for the NADH1, COX3, NADH4, and Control regions; HKY + G for the NADH2, ATPase8, and NADH4L regions; TVM + G for the COX2 region; HKY + I + G for the ATPase6 and NADH6 regions; TVM + I for the NADH3 region; K81uf + I + G for the NADH5 region; TrN + G for the Cytb region (Additional file 1: Table S12). Each analysis consisted of 20,000,000 generations with a burn-in of 20,000 and a sample frequency of 500. Bayesian posterior probability (BPP) values are shown on internal nodes to indicate the robustness of the phylogenomic analysis.
ML analysis was performed using PHYML 3.0 with a BIONJ starting tree under the GTR model and nonparametric bootstrap analysis was conducted with 500 pseudoreplicates. The proportion of invariable sites and gamma shape parameter were estimated from the dataset and the number of substitution rate categories was set to 6. The tree topology optimization was chosen.
NJ analysis  was conducted using the PHYLIP package 3.69 , based on Kimura’s  two-parameter distance. Ts/Tv ratios (10.10) were estimated from the data set using PUZZLE 4.0.2  and then were used as inputs for the SEQBOOT, DNADIST, NEIGHBOUR, and CONSENS programs of the PHYLIP package. A bootstrap test (with 1,000 pseudoreplicates)  was performed to determine the statistical support for each node of the NJ tree.
Co-estimation of evolutionary rates, TMRCA
To co-estimate the evolutionary rates and times to the most recent common ancestor (TMRCA), Bayesian coalescent approaches were implemented in BEAST 1.6.2 . Crown Cetacea was calibrated based on the oldest mysticete fossil Llanocetus [50,51] (34 Mya, 35 mean, 1.0 SD. The age of the basal of the crown Mysticeti was calibrated based on an unnamed balaenid from New Zealand  (28 Mya, 29.0 mean, 1.0 SD). Kogia breviceps (Odontoceti; Kogiidae) was used as an outgroup. The analysis was conducted under the GTR + I + G model, nst = 6, and rates = gamma derived from AIC in ModelTest 3.7 . We employed relaxed uncorrelated lognormal for molecular clock model and Yule process for tree topology prior. The data sets were each run for 20,000,000 generations to ensure convergence of all parameters (ESSs > 200) with discarded burn-in of 10%. The resulting convergence was analyzed using Tracer 1.5 (http://beast.bio.ed.ac.uk/Tracer) and the statistical uncertainties were summarized in the 95% highest probability density (HPD) intervals. Trees were summarized as maximum clade credibility trees using the TreeAnnotator program, which forms part of the BEAST package, and were visualized using FigTree 1.4.0 (http://tree.bio.ed.ac.uk/software/figtree/).
dN/dS ratio of orthologous genes
We used protein and reference cDNA sequences of human, mouse, dog, pig, cow, horse, and dolphin from Ensembl  and the common minke whale from our results. We used Hcluster_sg  to generate clusters based on BLAST 2.2.27 +  results. Then we generated multiple alignments for input into Mestortho  using PRANK31 . Mestortho was used to identify the 1:1 orthologs of all eight species. As a result, 5,539 1:1 orthologs were identified and used to estimate the synonynous and nonsynonymous substitution rates. We obtained phylogenetic tree information from Timetree (www.timetree.org). Orthologous gene sets were aligned using PRANK31 , and poorly aligned sites were eliminated using Gblocks . We used the ML method from codeml of PAML 4  to estimate the dN (the rate of non-synonymous substitution), dS (the rate of synonymous substitution), and ω (the ratio of non-synonymous substitutions to the rate of synonymous substitutions) with F3X4 codon frequencies under the branch (model = 2, NSsites = 0) and basic models (model = 0, NSsites = 0). Results from the branch model were filtered with dS > 3 or dN/dS > 5. A log likelihood ratio test (LRT) was performed to compare these models; FDR adjustments for multiple testing corrections were applied , and a significance level of P < 0.05 was used.
We used the protein and reference cDNA sequences of common minke whales and dolphins. We used the RBH method from BLAST 2.2.27 + . As a result, 11,698 1:1 orthologs for the two species were identified. We generated multiple alignments using PRANK31  and eliminated poorly aligned sites using Gblocks  before performing a standard McDonald-Kreitman test .
Dawkins R. The ancestor's tale: a pilgrimage to the dawn of evolution. Houghton Mifflin Harcourt; 2005
Reidenberg JS. Anatomical adaptations of aquatic mammals. Anat Rec. 2007;290(6):507–13.
Thewissen J, Cooper LN, George JC, Bajpai S. From land to water: the origin of whales, dolphins, and porpoises. Evol: Educ Outreach. 2009;2(2):272–88.
Heyning JE. Thermoregulation in feeding baleen whales: Morphological and physiological evidence. Aquat Mammals. 2001;27(3):284–8.
Deméré TA, McGowen MR, Berta A, Gatesy J. Morphological and molecular evidence for a stepwise evolutionary transition from teeth to baleen in mysticete whales. Syst Biol. 2008;57(1):15–37.
Uhen MD. The origin (s) of whales. Annu Rev Earth Planet Sci. 2010;38:189–219.
Werth A. Feeding in marine mammals. In: Feeding: form, function and evolution in tetrapod vertebrates. New York: Academic; 2000. p. 475–514.
Yim H-S, Cho YS, Guang X, Kang SG, Jeong J-Y, Cha S-S, et al. Minke whale genome and aquatic adaptation in cetaceans. Nature genetics. 2014;46:88–92.
Zhou X, Sun F, Xu S, Fan G, Zhu K, Liu X, et al. Baiji genomes reveal low genetic variability and new insights into secondary aquatic adaptations. Nature communications. 2013;4:2708.
Gnerre S, MacCallum I, Przybylski D, Ribeiro FJ, Burton JN, Walker BJ, et al. High-quality draft assemblies of mammalian genomes from massively parallel sequence data. Proc Natl Acad Sci. 2011;108(4):1513–8.
Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008;24(5):637–44.
Altschul SF, Madden TL, Schäffer AA, Zhang J, Zhang Z, Miller W, et al. Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997;25(17):3389–402.
Langmead B, Salzberg SL. Fast gapped-read alignment with Bowtie 2. Nat Methods. 2012;9(4):357–9.
Reya T, Clevers H. Wnt signalling in stem cells and cancer. Nature. 2005;434(7035):843–50.
Kishimoto J, Burgeson RE, Morgan BA. Wnt signaling maintains the hair-inducing activity of the dermal papilla. Genes Dev. 2000;14(10):1181–5.
Hammond NL, Headon DJ, Dixon MJ. The Cell Cycle Regulator Protein 14-3-3[sigma] Is Essential for Hair Follicle Integrity and Epidermal Homeostasis. J Invest Dermatol. 2012;132(6):1543–53.
Herron BJ, Liddell RA, Parker A, Grant S, Kinne J, Fisher JK, et al. A mutation in stratifin is responsible for the repeated epilation (Er) phenotype in mice. Nat Genet. 2005;37(11):1210–2.
Tatemoto K. Neuropeptide Y: complete amino acid sequence of the brain peptide. Proc Natl Acad Sci U S A. 1982;79(18):5485–9.
Bi S, Kim YJ, Zheng F. Dorsomedial hypothalamic NPY and energy balance control. Neuropeptides. 2012;46(6):309–14.
Bi S. Role of dorsomedial hypothalamic neuropeptide Y in energy homeostasis. Peptides. 2007;28(2):352–6.
Gray TS, Morley JE. Neuropeptide Y: anatomical distribution and possible function in mammalian nervous system. Life Sci. 1986;38(5):389–401.
Egea R, Casillas S, Barbadilla A. Standard and generalized McDonald–Kreitman test: a website to detect selection by comparing different classes of DNA sites. Nucleic Acids Res. 2008;36 suppl 2:W157–62.
Seim I, Ma S, Zhou X, Gerashchenko MV, Lee S-G, Suydam R, et al. The transcriptome of the bowhead whale Balaena mysticetus reveals adaptations of the longest-lived mammal. Aging. 2014;6(10):879–99.
Gashler A, Sukhatme VP. Early growth response protein 1 (Egr-1): prototype of a zinc-finger family of transcription factors. Prog Nucleic Acid Res Mol Biol. 1995;50:191–224.
Tsai-Morris CH, Cao XM, Sukhatme VP. 5' flanking sequence and genomic structure of Egr-1, a murine mitogen inducible zinc finger encoding gene. Nucleic Acids Res. 1988;16(18):8835–46.
Karavanova I, Vainio S, Thesleff I. Transient and recurrent expression of the Egr-1 gene in epithelial and mesenchymal cells during tooth morphogenesis suggests involvement in tissue interactions and in determination of cell fate. Mech Dev. 1992;39(1–2):41–50.
Pham L, Bezouglaia O, Camargo PM, Nervina JM, Tetradis S. Prostanoids induce egr1 gene expression in cementoblastic OCCM cells. J Periodontal Res. 2007;42(5):486–93.
Ruiz S, Segrelles C, Bravo A, Santos M, Perez P, Leis H, et al. Abnormal epidermal differentiation and impaired epithelial-mesenchymal tissue interactions in mice lacking the retinoblastoma relatives p107 and p130. Development. 2003;130(11):2341–53.
Arvio P, Arvio M, Pirinen S. Characteristic dental arches and occlusion in patients with aspartylglucosaminuria. J Craniofac Genet Dev Biol. 1997;17(3):133–40.
Arvio P, Arvio M, Kero M, Pirinen S, Lukinmaa P-L. Overgrowth of oral mucosa and facial skin, a novel feature of aspartylglucosaminuria. J Med Genet. 1999;36(5):398–404.
Li R, Fan W, Tian G, Zhu H, He L, Cai J, et al. The sequence and de novo assembly of the giant panda genome. Nature. 2009;463(7279):311–7.
Andrews S: FASTQC. A quality control tool for high throughput sequence data. http://www.bioinformatics.babraham.ac.uk/projects/fastqc/ 2010.
Peng Y, Leung HC, Yiu S, Chin FY. IDBA-UD: a de novo assembler for single-cell and metagenomic sequencing data with highly uneven depth. Bioinformatics. 2012;28(11):1420–8.
Luo R, Liu B, Xie Y, Li Z, Huang W, Yuan J, et al. SOAPdenovo2: an empirically improved memory-efficient short-read de novo assembler. GigaScience. 2012;1(1):1–6.
Tarailo-Graovac M, Chen N. Using RepeatMasker to identify repetitive elements in genomic sequences. Curr Prot Bioinformatics. 2009;4:Unit 4.10.
Chenna R, Sugawara H, Koike T, Lopez R, Gibson TJ, Higgins DG, et al. Multiple sequence alignment with the Clustal series of programs. Nucleic Acids Res. 2003;31(13):3497–500.
McKenna A, Hanna M, Banks E, Sivachenko A, Cibulskis K, Kernytsky A, et al. The Genome Analysis Toolkit: a MapReduce framework for analyzing next-generation DNA sequencing data. Genome Res. 2010;20(9):1297–303.
Kiełbasa SM, Wan R, Sato K, Horton P, Frith MC. Adaptive seeds tame genomic sequence comparison. Genome Res. 2011;21(3):487–93.
Katoh K, Misawa K, Kuma KI, Miyata T. MAFFT: a novel method for rapid multiple sequence alignment based on fast Fourier transform. Nucleic Acids Res. 2002;30(14):3059–66.
Swofford D. PAUP*: phylogenetic analysis using parsimony, version 4.0 b10. Sunderland, MA: Sinauer Associates; 2003.
Posada D, Crandall KA. Modeltest: testing the model of DNA substitution. Bioinformatics. 1998;14(9):817–8.
Ronquist F, Huelsenbeck JP. MrBayes 3: Bayesian phylogenetic inference under mixed models. Bioinformatics. 2003;19(12):1572–4.
Guindon S, Gascuel O. A simple, fast, and accurate algorithm to estimate large phylogenies by maximum likelihood. Syst Biol. 2003;52(5):696–704.
Saitou N, Nei M. The neighbor-joining method: a new method for reconstructing phylogenetic trees. Mol Biol Evol. 1987;4(4):406–25.
Plotree D, Plotgram D. PHYLIP-phylogeny inference package (version 3.2). Cladistics. 1989;5:164–6.
Kimura M. A simple method for estimating evolutionary rates of base substitutions through comparative studies of nucleotide sequences. J Mol Evol. 1980;16(2):111–20.
Strimmer K, Von Haeseler A. Quartet puzzling: a quartet maximum-likelihood method for reconstructing tree topologies. Mol Biol Evol. 1996;13(7):964–9.
Felsenstein J. Confidence limits on phylogenies: an approach using the bootstrap. Evolution. 1985;39(4):783–91.
Drummond AJ, Rambaut A. BEAST: Bayesian evolutionary analysis by sampling trees. BMC Evol Biol. 2007;7(1):214.
Steeman ME. Cladistic analysis and a revised classification of fossil and recent mysticetes. Zool J Linn Soc. 2007;150(4):875–94.
Mitchell ED. A New Cetacean from the Late Eocene La Meseta Formation Seymour Island, Antarctic Peninsula. Can J Fish Aquat Sci. 1989;46(12):2219–35.
Hubbard T, Barker D, Birney E, Cameron G, Chen Y, Clark L, et al. The Ensembl genome database project. Nucleic Acids Res. 2002;30(1):38–41.
Ruan J, Li H, Chen Z, Coghlan A, Coin LJM, Guo Y, et al. TreeFam: 2008 update. Nucleic Acids Res. 2008;36 suppl 1:D735–40.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990;215(3):403–10.
Kim KM, Sung S, Caetano-Anollés G, Han JY, Kim H. An approach of orthology detection from homologous sequences under minimum evolution. Nucleic Acids Res. 2008;36(17):e110.
Loytynoja A, Goldman N. An algorithm for progressive multiple alignment of sequences with insertions. Proc Natl Acad Sci U S A. 2005;102(30):10557–62.
Talavera G, Castresana J. Improvement of phylogenies after removing divergent and ambiguously aligned blocks from protein sequence alignments. Syst Biol. 2007;56(4):564–77.
Yang Z. PAML 4: phylogenetic analysis by maximum likelihood. Mol Biol Evol. 2007;24(8):1586–91.
Benjamini Y, Yekutieli D. The control of the false discovery rate in multiple testing under dependency. Annals of Statistics. 2001;29(4):1165–88.
This work was funded by a grant from the National Fisheries Research and Development Institute (NFRDI), contribution number RP-2014-BT-003. We are grateful to our colleagues from the Laboratory of Bioinformatics and Population Genetics for technical assistance and helpful discussion.
The authors declare that they have no competing interests.
JP, YA, NK, CA, HA, JK, EK, DA, HJ, MJ and MP, performed the research. JP and HK designed the research. SY, BL, TL, KK, WP, DH, YL, JK, WK, HK, YJK, SM and YK analyzed data. JP, DWB, SC and HK wrote the manuscript. All authors read and approved the final manuscript.
Summary of read mapping to three assembled genomes using Bowtie2. Figure S2. BI tree using the partitioned model approach. Here the complete mitochondrial genome sequences were divided into 18 partitions. Figure S3. Biological Process of Gene Ontology of common minke whale showing 249 accelerated genes among 8 mammals. Figure S4. Overview of the assembly, gene prediction and variant calling process. Figure S5. Process of contig extention and bridging. Table S1. Summary statistics of common minke whale genome assembly by sample. Table S2. Summary of RepeatMasker results by sample. Table S3. Summary of gene prediction results using Augustus and Blastp. Table S4. Contig classification of the four samples. Table S5. Summary statistics of the combined common minke whale genome assembly. Table S6. Summary of repeat masking results using RepeatMask. Table S7. Summary of read mapping using Bowtie2. Table S8. Summary of variant calling results using GATK. Table S9. The result of SNP genotype concordance between using the reference of 1) reported draft genome and 2) assembled scaffolds of our study. Table S10. Species name of the sequences used in the present study with the GenBank accession numbers. New sequences obtained in this study are marked with an asterisk (*). Table S11. Sequencing results of the four common minke whale samples. Table S12. Best fitted model of each MT genomic region of the whales.
About this article
Cite this article
Park, J.Y., An, Y., Kanda, N. et al. Cetaceans evolution: insights from the genome sequences of common minke whales. BMC Genomics 16, 13 (2015) doi:10.1186/s12864-015-1213-1
- Common minke whale
- Positive selection