- Methodology article
- Open Access
The next generation of target capture technologies - large DNA fragment enrichment and sequencing determines regional genomic variation of high complexity
© The Author(s). 2016
- Received: 4 August 2015
- Accepted: 15 June 2016
- Published: 9 July 2016
The ability to capture and sequence large contiguous DNA fragments represents a significant advancement towards the comprehensive characterization of complex genomic regions. While emerging sequencing platforms are capable of producing several kilobases-long reads, the fragment sizes generated by current DNA target enrichment technologies remain a limiting factor, producing DNA fragments generally shorter than 1 kbp. The DNA enrichment methodology described herein, Region-Specific Extraction (RSE), produces DNA segments in excess of 20 kbp in length. Coupling this enrichment method to appropriate sequencing platforms will significantly enhance the ability to generate complete and accurate sequence characterization of any genomic region without the need for reference-based assembly.
RSE is a long-range DNA target capture methodology that relies on the specific hybridization of short (20-25 base) oligonucleotide primers to selected sequence motifs within the DNA target region. These capture primers are then enzymatically extended on the 3’-end, incorporating biotinylated nucleotides into the DNA. Streptavidin-coated beads are subsequently used to pull-down the original, long DNA template molecules via the newly synthesized, biotinylated DNA that is bound to them. We demonstrate the accuracy, simplicity and utility of the RSE method by capturing and sequencing a 4 Mbp stretch of the major histocompatibility complex (MHC). Our results show an average depth of coverage of 164X for the entire MHC. This depth of coverage contributes significantly to a 99.94 % total coverage of the targeted region and to an accuracy that is over 99.99 %.
RSE represents a cost-effective target enrichment method capable of producing sequencing templates in excess of 20 kbp in length. The utility of our method has been proven to generate superior coverage across the MHC as compared to other commercially available methodologies, with the added advantage of producing longer sequencing templates amenable to DNA sequencing on recently developed platforms. Although our demonstration of the method does not utilize these DNA sequencing platforms directly, our results indicate that the capture of long DNA fragments produce superior coverage of the targeted region.
- DNA target capture
- Targeted enrichment
- Genomic resequencing
- DNA sequencing
- MHC haplotype
Next-Generation Sequencing (NGS) technology has forever transformed the field of genetics, enabling large-scale, high throughput genetic studies for a variety of research and diagnostic applications. While economically sequencing entire genomes remains an important goal of NGS, many research and diagnostic applications are best achieved through targeted DNA sequencing of specific genomic loci. Targeted DNA sequencing is advantageous not only because it is more cost effective, as it facilitates higher sample throughput than whole genome sequencing, but also because it improves accuracy by optimizing the read depth coverage and by reducing the complexity of the DNA to be sequenced.
Several methods have been developed for the targeted enrichment of genomic DNA [1–4] for a variety of clinical and research applications [5–11]. They are typically based upon a multiplexed PCR amplification reaction , DNA hybridization to a capture oligonucleotide (either on an array or in solution) [13–15] or DNA capture via molecular inversion probe circularization [16, 17]. Regardless of the method employed, all of these DNA enrichment methods rely heavily on fragmentation of genomic DNA prior to amplification, resulting in relatively short (less than 1000 base-pair) sequencing templates. As a result, existing methods for genomic partitioning remain a severely limiting factor for comprehensively characterizing complex genomic loci because they cannot provide the larger size fragments that are required to successfully span confounding sequence elements, such as extended repeats, or resolve sections of unknown or unexpected sequence that have been inserted or rearranged within the targeted region [18, 19].
Importantly, such large DNA templates can now be utilized by the newer, “third generation” sequencing platforms which are capable of producing significantly larger read lengths [20–22] and sequencing through traditionally difficult sequence templates with high GC content . The longer read lengths produced by these platforms have been shown to be highly advantageous in characterizing structural variants, haplotype phasing within complex genomic loci and de novo genome assembly [22, 24–26].
A specific program (Antholigo; see “Methods”) we developed for the primer design can be instructed to position the primers at variable distances from their nearest neighbors. If desired, this distance can be 8-10 kbp or greater in order to minimize the number of primers used, while providing for optimal coverage of the targeted region. RSE is simple to use and requires no fragmentation of the genomic sample prior to capture, as other enrichment technologies do. Although the typical size of captured fragments in this study was about 20 kbp, the same principle has been used to extract significantly larger segments depending on DNA quality and the method used for its extraction .
Here we demonstrate the utility of RSE for the targeted sequencing of the most complex region of the human genome, the major histocompatibility complex (MHC; HG19 coordinates chr6:29618227-33618227) on the short arm of chromosome 6. The MHC is known to be the most gene-dense region of the human genome, with many transcribed genes playing an important role in innate and adaptive immune processes . Consequently, numerous loci throughout the MHC have been associated with immune-mediated diseases [29–32]. The MHC contains dozens of highly polymorphic genes and large regions of duplication and repetitive elements . Interestingly, despite its significance, there are only two completely characterized MHC haplotypes from two homozygous B cell lines namely PGF (the reference sequence for the MHC in the reference human genome) and COX [33–36]. The same region of the MHC and of the same cell line PGF has been targeted by other capture technologies  and offers a unique opportunity for comparisons that demonstrate the advantages of RSE. Eventually this technology can contribute greatly to the comprehensive characterization of such difficult regions around the genome by providing both accurate sequencing and description of structural variations including deletions, insertions and duplications.
The optimal spacing of capture primers depends in part on the particular DNA extraction method that was used to prepare the DNA from blood, tissue or cells: The larger the fragments of DNA generated during extraction, the larger the spacing of the primers can be. To study the dependence of capture efficiency at variable distances from the point of primer hybridization, we designed qPCR assays at varying distances from single RSE primers at multiple genomic regions: CLEC16A, EGFR, BRCA2, KCNE1, NOS3, KCNJ2 and CETP (Fig. 2b). We purposely selected unrelated genomic targets to avoid any potential capture bias due to local sequence content and likewise controlled for reliable qPCR amplification at the selected positions. For the DNA used in this study (human genomic DNA extracted by magnetic particle-based isolation on the BioRobot EZ1 (Qiagen), stored frozen in EB and approximately 6-24 months old), qPCR probes located within 1 kbp of a single RSE capture primer generated target to non-target ratios of greater than ≈ 35:1, and primers 2–4 kbp distant produced target to non-target ratios of ≈ 20:1 or greater (Fig. 2b). At a distance of approximately 8-9 kbp from a capture primer, the target to non-target ratio dropped to ≈ 10:1. Estimating this trend beyond 10 kbp, we projected that beyond approximately 25 kbp there will be little to no difference between targeted and non-targeted material for the DNA used here.
CGH – Determination of effective primer spacing
As seen in Fig. 3c, the hybridization signal (Log2Score) at the mid-point between RSE primers decreases rapidly with increasing spacing. As predicted by the qPCR data (Fig. 2b), the array results suggest that primer spacing intervals greater than ≈ 25 kbp produce no net increase in the amount of targeted material retrieved per capture primer. For the purpose of defining sufficient enrichment for sequencing, the results suggest that primer spacing of <10 kbp is required to avoid dropout of target template due to any capture efficiency differences that may occur between primers.
RSE primer design and MHC capture
The RSE capture method was tested and evaluated on the human MHC because the MHC represents an important and highly complex genomic region that challenges the sequencing enhancement abilities of RSE in a “worst case” scenario. For validation, the homozygous cell line PGF was chosen because a majority of the MHC region within the human reference sequence is based exclusively on the PGF haplotype. A stable and well-characterized reference genome is critical for detecting variant calling errors caused by potential sequence alignment problems, assessing any observed gaps in read coverage and a comparison with existing DNA capture methodologies, which were also evaluated on the MHC .
Based upon the qPCR and array CGH results, we designed RSE primers to capture the 4Mbp of the MHC (HG 19 coordinates chr6-29618227-33618227) of the homozygous cell line PGF. The primers were designed based on the reference MHC sequence of the reference genome (HG19). Using in-house developed software (antholigo.chop.edu), 500 RSE primers were designed at ≈ 8 kbp intervals of across the MHC (Additional file 1: Table S1) with an average melting temperature of 58 °C and a target GC content of 50 % (+/-10 %). The primers are designed with similar biophysical characteristics that optimize their performance in the capture reaction, which requires the hybridization of oligonucleotides to genomic DNA.
Sequencing of the MHC
Targeted Region (bp)
Targeted Bases Called
Unique Bases (bp)
Unique Bases Called
% of Repeat Sequences
% of Unique Sequences
Total # of Reads Mapped to Whole Genome
Total # of Mapped Reads to Targeted Region
Average Depth of Coverage for Entire Genome (Non-Targeted)
Average Depth of Coverage for Entire Targeted Region
Average Depth of Coverage for Unique Sequence in Targeted Region
qPCR correlation to sequencing coverage
qPCR Probe Position within MHC
(3) Coverage Depth
Gap-free robustness of capture
From an optimization standpoint, this means that only 16 locations would require further RSE primer design or development to provide better depth of coverage at these sites. Considering that only 500 primers are needed to capture the entire MHC, the need to redesign 16 sites out of 500 from a first pass primer design is further evidence of the robustness of the method. From an overall efficiency standpoint, RSE capture produced an enrichment factor of about 82.7; less than that seen with some other technologies. The reasons for this are in part inherent in the capture of very large fragments: cross-hybridization between targeted and non-targeted regions can occur if the targeted genomic segments contain sequences - such as highly repetitive elements - that are also present on other, non-targeted fragments, unless suppressed by blocking such sites during the extraction. Shearing the DNA before capture can reduce the amount of off-target DNA, however this also decreases the available linkage distance. An alternative way to reduce off target material is the use of freshly prepared DNA. Regardless, however, sufficient enrichment for the region of interest is obtained to detect variants accurately.
In a recent publication whereby the MHC (4.9 Mb) of PGF was targeted using a Roche-Nimblegen array , the authors acknowledge the limitation of their targeting approach, as well as of most other methods, stating that they were unable to fully cover long, repeated regions and present 100 % coverage of the MHC region. They were able to cover about 94 % of the MHC, as compared to the 99.4 % covered by the RSE at a depth of ≥10×. They recognize that capturing fragments of 5 kbp or even longer will have a beneficial effect in coverage, particularly for regions that are long and highly repetitive.
While current technologies with closely spaced capture oligos suffer from any underlying variability across the targeted area, RSE primers are designed every 8-10 kbp. As such they can be located within regions of lower variability in order to avoid any placement in areas of genomic complexity. This strategy does not completely rule out any instances of variability at a chosen primer hybridization site, but it does provide for the greatest likelihood that any given capture primer is unaffected by every known genetic variance. In addition, because of the very short length of RSE primers compared to that of other types of capture probes (or “baits”), the RSE primers can reliably and redundantly be placed throughout even the most inaccessible regions of highly complex genomes (such as certain plant and animal genomes) that typically get completely repeat-masked and leave no adequately spaced unique sequence regions for the binding of larger capture probes (“baits”). Furthermore the Roche-Nimblegen array, mentioned earlier  for the capture of the MHC, needs to include probes that cover 85 % of the total bases of the MHC, which is close to 3.4Mbp, while the 500 primers used for the RSE cover about 0.25 % of the MHC, which is about 10kbp. Therefore there is a substantive lower number of oligos that need to be synthesized for the RSE vs the array capture method by Roche-Nimblegen.
Universal capture sets for highly variable target regions
Our current experience is that, irrespectively of the complexity of a genomic region, a single standard set of primers can be designed and is able to successfully capture the full extent of complex targeted regions of many different DNA samples (the 4 Mb of the MHC from five other homozygous cell lines have been successfully captured and sequenced; data not shown). This is possible because, in contrast to other capture methodologies, the number of primers to target a particular region is over 100 fold reduced and we can therefore create a near-universal primer set for any given region that contains at least a number of conserved reference points; even when the target region is otherwise highly polymorphic or contains unexpected, unknown sequence or repeat elements.
In the event that some of the designed primers do turn out to be ineffective in terms of capturing a particular region because of local variation, the nature of the method is such that such primers can easily be redesigned and included in the mixture of primers that capture the entire region of interest, without the need to change or re-synthesize any of the others. The capture primers are only about 20-25 nucleotides long, which means that the vast majority of the targeted region never directly comes in contact with any capture primers. This is important because it makes the enrichment nearly immune to pull-down failure and allelic dropout in the case of genomic variations that have not been or could not be anticipated in the capture primer design.
In comparison, other methods may require capture probe/primer sets with a combined coverage of the probe/primer that sums up to more than half the sequence of a targeted region (85 % in the case of Roche-Nimblegen array for the MHC ). This leads to a correspondingly high risk of pull-down failure when mutations occur in the region because any stretches of unknown or unexpected sequence within the target region will likely be missed since no capture primers were designed for them. It is important to note at this point that in order to enable streamlined applications in medical diagnostics and theranostics, a single set of reliable capture primers is essential. Designing a single set of reliable capture primers can also be a valuable asset for navigating around other complex and variable sequences that are not fully referenced yet, such as oncology specimens and many plant or animal genomes that are of scientific and economic interest.
Variant analysis and sanger validation
From a sequencing perspective, the ultimate goal is to provide high depth of coverage across an entire genomic region to promote accurate alignment and variant calling, including sections of the targeted region that may contain unexpected or novel sequence variants. With an average depth of coverage of 164× for all 4 Mb of the targeted MHC, the RSE extraction produces very high depth of coverage. The greatest advantage of RSE is that the depth of coverage is maintained contiguously for almost all bases across the entire region - not merely for exonic regions – and therefore includes important elements such as regulatory and promoter regions that may be key to explaining phenotypes associated with diseases.
The sequencing results were then analyzed to detect variations between the reference genome and the PGF sequencing data. Out of 4 million bases sequenced, a total of 430 variants were found with 409 being single nucleotide substitutions and 21 being in/dels. This defines a variant load of ≈ 1 variant per 9302 bp for the targeted region. Among unique sequences, 102 variants were found corresponding to a variant load of 1 in 18,585 bp. Raw variants were filtered to include only those variants with a coverage depth greater than 20× and a QUAL score greater than 30, leaving 92 identified single nucleotide substitutions and 10 indels.
Sanger validation of identified NGS variants
Type of variants
Sanger agrees with NGS
Sanger agrees with reference
61 Sanger Validated Variants (Gene Regions)
25 Sanger Validated Variants (Intergenic)
RSE resolves erroneous classification of MHC variants
Two additional variants were caused by read misalignment from a segmental duplication (Additional file 1: Figure S1) (data not included in Table 3). In this case, read alignment identified a “polymorphism” between the two copies of a known segmental duplication. The erroneous classification of this paralogous sequence variant (PSV) as a SNP in the reference sequence was caused by improper segregation of the reads due to an error in the reference sequence located at one of the duplications: The reference error incorrectly identified the central portion of the duplications as being identical, when in reality there was a single base difference between them. The reference error was confirmed by Sanger sequencing and upon editing of the reference sequence, the NGS reads were properly aligned, eliminating the two identified discrepancies (see Additional file 1: Figure S1). A large portion of the NGS errors have known causes, but clearly premature assumptions should not be made when examining variant tables even when the depth of coverage is very high. We strongly suggest that critical variants be further examined at the bam-file level to determine the likelihood of an NGS error.
Detecting variation within the HLA genes
Considering that the accuracy of the overall unique MHC sequences was 1 variant in every 18,585 bases and that cumulatively the number of bases for the 6 HLA genes is ≈ 38.4 kbp, it would be expected to have no more than 2 variants in the 6 HLA sequences. However, our HLA typing results were found to be concordant with those alleles previously reported by the MHC haplotype project  for the homozygous cell line, PGF, with 100 % sequence identity between our consensus sequence for each locus and the reported allele for each locus considered. The exact typing determined by our method was HLA-A*03:01:01:01, B*07:02:01, C*07:02:01:03, DRB1*15:01:01:01, DQB1*06:02:01, DPB1*04:01:01:01.
Due to the nature of its underlying principle, RSE has distinct advantages over current techniques as well as restrictions that can limit its effectiveness depending on the application. For example, the ability to capture DNA segments that are at least an order of magnitude larger than those isolated with other methods comes with a lower overall capture efficiency per locus compared to short-fragment pull-down methods. For most RSE captures, the maximum amount of material extracted at any targeted region is generally less than 30 % and usually around 10 % of the total DNA captured (Table 1: reads mapped to targeted region/reads mapped to whole genome = 10.34 %), again dependent on the length of the DNA template before RSE and the target DNA’s degree of entanglement with other strands during isolation by RSE.
Hybridization of primers to non-targeted sites and the addition of the capture moiety, biotin, via primer extension-based nucleotide addition can result in random accumulation of off-target material. DNA quality - i.e. primarily age, the method used for its extraction from blood/tissue/cells, and conditions for its storage and handling - play a crucial role here and can be a major cause for off-target material accumulation. Extensive heating also creates DNA damage. For certain applications it may therefore be advisable to perform an alkaline denaturation instead of one by heat.
Lastly, due to the large DNA segments captured by RSE, it also isolates any repeat regions that are located within 10-20 kbp of a target site. If present in high copy numbers, DNA fragments deriving from these segments can result in unintended self-priming events during any required subsequent whole genome amplification (WGA) step, which may disproportionately increase the amount of these sequences if the amplification time is allowed to be long. While there is no indication in the depth of coverage data that this was a significant problem adversely affecting our sequencing results, it is known that excessive WGA times can lead to bias in template over-representation. We therefore recommend limiting any WGA to 1-2 h (for the Qiagen REPLI-g Mini kit) unless forced to work with very small amounts of input DNA for RSE. Recent advances in NGS library preparation protocols have drastically reduced the amount of input DNA needed (< 20-50 ng), which obviates the need to perform the WGA step at all provided that sufficient amounts of genomic DNA template are available for RSE.
The main advantage of RSE is its ability to specifically capture and provide unambiguous sequence data even for DNA sections that are embedded in highly repetitive, complex or unknown regions. The corresponding amount of off-target material still does present challenges to the sequence alignment process and limits the degree of sample multiplexing per NGS run, but it can be controlled to some degree through the steps listed above. As seen in the sequencing results shown here, the number of reads that aligned to the targeted MHC region is ≈ 10 % of the total number of reads that map to the genome (Table 1). The amount of off-target material is largely spread evenly across the entire genome with very low coverage. This reduces its impact and allows for high quality sequencing and accurate variant detection for large, contiguous genomic regions of interest.
Region specific extraction is a genomic targeting method with distinct advantages over other, currently employed targeting approaches. By capturing very long (≈ 20 kbp in this study), overlapping DNA segments directly from a sample of genomic DNA, RSE can isolate an entire contiguous target region, including exonic, intronic and intergenic regions. As such it provides the framework for the reliable characterization of any genomic region, regardless of its complexity and variability. With an appropriate sequencing technology that can characterize long fragments (i.e. Pacific BioSciences, Oxford Nanopore), RSE can also provide haplotype phase information, thereby setting the stage for accurate de novo assembly of targeted genomic regions such as the MHC.
RSE was able to deliver adequate coverage (99.937 %) and impressive accuracy (99.99 %-1 variant in every 9302 bases) throughout a highly complex target region. While our analysis of short Illumina reads, derived from the homozygous cell line PGF, has facilitated the comprehensive characterization of the PGF MHC through reference-guided read mapping to the corresponding MHC haplotype, RSE is uniquely positioned to characterizing the inherent sequence complexity of the MHC derived from a heterozygous sample. This could be accomplished via sequencing platforms that generate long reads which can be used to phase long stretches of repeat sequence elements and structural variations present throughout the MHC of a heterozygous sample. Towards this end, our lab has demonstrated the utility of RSE to generate long read sequencing templates from the targeted MHC capture of the homozygous cell lines PGF and COX, and subsequent PacBio sequencing. Our initial results produce PacBio sequencing reads with an average length of ≈ 4.5 kbp and very encouraging de novo assembly results (manuscript in preparation), suggesting that haplotype resolved de novo assembly of heterozygous MHC samples is feasible.
Genomic DNA preparation
The PGF and GM 12248 (CEPH collection) cell lines were obtained from Coriell Cell Repositories. Cells were cultured overnight at 37 °C, 5 % CO2. On the next day, cells were split into two 75 cm2 culture flasks and cultured in 10 ml of RPMI1640 containing 10 % Fetal Calf Serum at 37 °C, 5 % CO2. After obtaining 2 × 107 cells per flask, gDNA was extracted using a Blood & Cell Culture DNA Midi Kit (Qiagen, Cat# 13343).
Whole genome amplification
The enriched samples were amplified with REPLI-g Midi Kit (Qiagen Cat.# 150043) according to manufacturer’s protocol using 5 μl of RSE template and incubating at 30 °C for 16 h followed by inactivation of the enzyme at 65 °C for 3 min. Residual primers and dNTPs were deactivated with ExoSAP-IT (Affymetrix, Cat.# 78201 1 μl) according to the manufacturer’s protocol (http://media.affymetrix.com/support/technical/usb/brochure/ExoSAP-IT_Brochure.pdf).
RSE capture primer design
The design of RSE primers used for the capture of targeted regions was performed using a custom designed software program called RSE Antholigo (available via http://antholigo.chop.edu/dgdweb/oligo/home.html). It utilizes and integrates tools and databases to automatically generate primer sets that satisfy several user-defined criteria at predefined genomic intervals. It accesses a local installation of the UCSC database and human genome sequence library downloaded from UCSC Genome Browser to retrieve DNA sequences that are masked for repeat regions and SNPs. A genomic region of interest is parsed into smaller regions in which the primers are designed approximately equidistant to each other based upon user settings (currently, the primers are 6-10 kbp apart). It then uses the primer design software Primer3  to design the primers based on user-defined criteria including GC content, melting temperature and length. After primers are chosen, homology between selected primers and the rest of the genome is checked with BLAT .
The program targets conserved sequence across the region of interest. The RSE capture primers had a melting temperature of approximately 58 °C and GC content of 50 % (+/-10). Antholigo uses proprietary software UNAFold  that performs a pair-wise assessment of all primers to ensure minimal primer dimer formation and minimal hairpin formation. In this experiment, 500 capture primers were designed to target the entire 4 Mbp of the MHC (HG19 coordinates chr6:29618227-33618227) at an average spacing of ≈ 8 kbp and a target to primer sequence coverage ratio of > 300 (see Additional file 1: Table S1 for the list of primers and supporting information). The primers were synthesized by IDT (Integrated DNA Technologies), (Coralville, IA) and provided in their “Lab Ready” format, pre-diluted to 100 μM. Primers were then combined (in water) to an equimolar ratio of all 500 primers.
Region Specific Extraction (RSE)
Each 30 μl RSE reaction contained approximately 550 ng genomic DNA, 5 μM region specific primer mixture, H-Buffer containing polymerase, dNTPs and biotinylated dNTPs (Generation Biotech, Prod.# 720; www.generationbiotech.com) and DNAse-free water. Extractions were placed on a heat block with a heated lid (SciGene Hybex™; www.scigene.com/details.php?pid=1180) to denature the DNA at 95 °C for 7.5 min. The samples were then transferred to a BioRobot EZ1 (Qiagen). An automated protocol completes a 20 min incubation at 64 °C during which the region specific primers anneal and are enzymatically extended, incorporating a mix of unmodified and biotinylated dNTPs. The targeted genomic DNA was captured by incubating with 60 μl of streptavidin-coated magnetic microparticles (Generation Biotech, Prod.# 710) at room temperature on the EZ1 following GB protocol. The EZ1 protocol washes the microparticles containing the captured DNA to remove non-targeted DNA. The particles carrying the targeted DNA are then collected and resuspended in 50 μl Qiagen EB buffer on the EZ1. The captured DNA is then removed from the magnetic particles by heating the solution at 80 °C for 15 min and magnetically collecting the particles. The target DNA is retained in the supernatant.
Capture efficiency assessment
The capture efficiency at different distances from the primer hybridization site was assessed using, seven loci (CLEC16A, EGFR, BRCA2, KCNE1, NOS3, KCNJ2 and CETP) all outside the MHC, by qPCR (quantitative PCR) using RSE captured material from the GM 12248 DNA sample. For each 25 μl reaction, 10 μl of enriched DNA sample were combined with 1× Qiagen Quantitect Probe PCR master mix (Cat. # 204345), 0.4 μM each of forward and reverse primers (IDT) and 0.2 μM probe (IDT). See Additional file 1: Table S2 for a list of qPCR primers and probes.
For the five qPCR assays used to quantify the PGF MHC extraction (Additional file 1: Table S2, MHC-1, MHC-2, MHC-3, MHC-4, MHC-5), 10 μl of sample were combined with 1× Qiagen Quantitect Probe PCR master mix (Cat. # 204345), 0.4 μM each of forward and reverse primers (IDT) and 0.2 μM probe (IDT) for assays in target region. Six 1:3 serially diluted GM12248 or PGF genomic DNA standards were run in duplicate for each locus as well as a single negative control. Forty cycles of (95 °C for 15 s, 60 °C for 1 min) were run after the initial denaturation at 95 °C for 15 min. Fluorescence was collected at 60 °C. The selection of sites for the design of the qPCR assays is made accounting for the sequencing characteristics of a particular region and its surrounding context, such that each assay will have reasonable chances to work. Depending on the size of the targeted region, multiple qPCR assays should be designed for both target and non-targeted regions for an accurate estimation of enrichment and of the corresponding depth of coverage that can be achieved after sequencing (See Additional file 1: Table S2 for a list of qPCR primers and probes).
Agilent custom array comparative genomic hybridization
Comparative Genomic Hybridization was used to assess optimal spacing of primers. Four loci (EGFR, BRCA2, KCNJ2 and CLEC2) were targeted with 46 primers (See Additional file 1: Table S5 for the complete list of primers used to capture the four regions) using genomic DNA from GM 12248 cell line. DNA was prepared using standard automated bead-based methods from Qiagen. This process generally produces genomic fragments in the 20–40 kbp range. A custom Agilent 8 × 15 K Agilent Comparative Genome Hybridization microarray (CGH) was designed using Agilent’s online tools (https://earray.chem.agilent.com/suredesign) and ordered using their standard custom array process. The array was used according to the manufacturer’s protocol, ver 5.0. Briefly, genomic DNA and whole genome amplified RSE extracted material was restriction digested with Alu I and Rsa I. The digested material was then labeled with Cy3 or Cy5 using the random priming process of the manufacturer. Labeled samples were then washed, filtered and checked for expected yields. 8 μl of each labeled sample was then prepared for hybridization by placing in blocking buffer (Cot-1, Agilent 10× blocking buffer and 2× hyb buffer), heated to 95 °C for 3 min, then placed in a water bath at 37 °C for 30 min. The custom array was prepared as per instructions. Sample was hybridized to the array at 65 °C for 24 h. The hyb cassette was opened and the array washed per instructions. The array was scanned at 5 μm resolution. Raw data was analyzed with the Agilent Feature Extraction software version 9.5 using default parameters.
Enrichment was estimated based on a haploid genome size of 3.2 Gb for the cell line used and on the data shown in Table 1. The enrichment was: (6,951,692/67,257,141)/(4,000,000/3.2*10^9) = 82.7.
Illumina GAIIx sequencing
Five micrograms of enriched, amplified material were used as input for preparation of the sequencing library. The library was prepared for sequencing using the Illumina Paired-End DNA Sample Prep Kit (Cat. # PE-102-1001), according to the manufacturer’s protocol. Sequencing was performed using an Illumina Genome Analyzer IIx, 2 × 125 base paired-end chemistry. Raw data (fastq) files have been made publicly available and are accessible on the NCBI SRA website (SRA accession: SRP075425).
To validate variant calls, genomic or whole genome amplified DNA was used. PCR primers for each variant were designed manually using the IDT website (www.idtdna.com). The full list of PCR primers is provided in Additional file 1: Table S3.
To set up each PCR reaction, 150 ng of gDNA or whole genome amplified DNA was combined with 10× PCR buffer (Qiagen), 10 mM dNTP mix (Life Technologies, Cat. # 18427088), 5U/μl HotStar Taq DNA Polymerase (Qiagen, Cat. # 203203), 5 μM each of forward and reverse primers and water. The thermocycling protocol was 10 min at 94 °C for the initial denaturation followed by 37 cycles of 30 s at 94 °C, 30 s at 53 °C or 57 °C, 30 s at 72 °C and a final extension for 5 min at 72 °C.1 After PCR, 2 % gel electrophoresis was performed to validate amplification. Then each amplicon was purified with 4 μl of ExoSAP-IT (Affymetrix, Cat. # 78201 1 μl) by incubation for 45 min at 37 °C, followed by inactivation of the enzyme for 15 min at 80 °C. Sanger sequencing was performed using the same primers, which were used for PCR amplification. Two μl of each amplicon were combined with 0.5 μl of 3.2 μM of each forward or reverse sequencing primer, 1.5 μl Big Dye 5× sequencing buffer, 1 μl Big Dye Terminator v 1.1 (Life Technologies, cat#4336701) and 5 μl water. The cycle sequencing protocol was 10 s at 96 °C followed by 25 cycles of 10 s at 96 °C, 10 s at 50 °C and 2 min at 60 °C. Reactions were precipitated with 2 μl NaOAc/EDTA buffer, followed by a wash using absolute ethanol and a second wash using 80 % ethanol and resuspended in 15 μl HiDi-formamide. The raw data was analyzed with Sequencing Analysis software, version 5.2 (Life Technologies/Applied Biosystems).
Sequence alignment & variant detection
PGF sequencing data was generated from 125 bp paired-end reads generated on the Illumina GAIIx sequencing platform. The paired-end reads were quality trimmed (minimum PHRED score of 30) using sickle version 1.010 (https://github.com/najoshi/sickle). Quality trimmed reads were aligned to the reference genome (HG19) using BWA version 0.6.2-r126 with default parameters . After alignment, variant calling was performed following GATK v3 best practices with recommended parameters for accurate and efficient variant calls  (GATK version 1.6-2-gc2b74ec and Picard version 1.57). The only step not applied was the removal of duplicates since the target (4 Mb of the MHC) was relatively small compared to the whole human genome.
Sequence variation within HLA loci
Reads mapped to the reference genome (HG19) were used to generate a consensus sequence for all HLA loci considered for typing (HLA-A, HLA-B, HLA-C, HLA-DRB1, HLA-DQB1, HLA-DPB1). For each locus, a consensus sequence was generated from the set of mapped reads using Samtools . The consensus sequence obtained from each locus was then aligned pairwise against each fully characterized allele within the IMGT database (ImMunoGeneTics; www.ebi.ac.uk/ipd/imgt/hla) for each respective locus using the Needleman-Wunsch algorithm as implemented within MATLAB. The highest alignment score was then used to call the allele for each locus and the percent sequence identity between a given consensus sequence and assigned allele for the particular locus in question was also calculated.
CGH, competitive genomic hybridization; MHC, major histocompatibility complex; NGS, next generation sequencing; PSV, paralogous sequence variant; RSE, region specific extraction; WGA, whole genome amplification
This work was supported by the National Institutes of Health [NIAID AT SBIR 5R44AI051036 to J.D.]; and The Children’s Hospital of Philadelphia Institutional Funds [to D.M]. Funding for open access charge: The Children’s Hospital of Philadelphia. Institutional support by Rider University is gratefully acknowledged [STARI Fellowship to J.D.].
Availability of data and materials
Raw data (fastq) files have been made publicly available and are accessible through the NCBI SRA website (SRA accession: SRP075425).
JD and DM designed the study and drafted the manuscript. DF, JD and KM carried out experimental work for the manuscript. PC, MD, AS and XG performed the computational analysis, data interpretation and prepared figures and text for the manuscript. ER performed the SNP array experiments. JS and KK performed the sequencing experiments for the manuscript. All authors read and approved the final manuscript.
JD is founder and president of Generation Biotech. All other authors declare that they have no competing interests.
Consent for publication
Ethics approval and consent to participate
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
- Mertes F, Elsharawy A, Sauer S, van Helvoort JM, van der Zaag PJ, Franke A, Nilsson M, Lehrach H, Brookes AJ. Targeted enrichment of genomic DNA regions for next-generation sequencing. Brief Funct Genomics. 2011;10(6):374–86.View ArticlePubMedPubMed CentralGoogle Scholar
- Altmuller J, Budde BS, Nurnberg P. Enrichment of target sequences for next-generation sequencing applications in research and diagnostics. Biol Chem. 2014;395(2):231–7.View ArticlePubMedGoogle Scholar
- Turner EH, Ng SB, Nickerson DA, Shendure J. Methods for genomic partitioning. Annu Rev Genomics Hum Genet. 2009;10:263–84.View ArticlePubMedGoogle Scholar
- Ballester LY, Luthra R, Kanagal-Shamanna R, Singh RR. Advances in Clinical Next-Generation Sequencing: Target Enrichment and Sequencing Technologies. Expert Rev Mol Diagn. 2016;16(3):357–72.View ArticlePubMedGoogle Scholar
- Lin X, Tang W, Ahmad S, Lu J, Colby CC, Zhu J, Yu Q. Applications of targeted gene capture and next-generation sequencing technologies in studies of human deafness and other genetic disabilities. Hear Res. 2012;288(1-2):67–76.View ArticlePubMedGoogle Scholar
- Christodoulou K, Wiskin AE, Gibson J, Tapper W, Willis C, Afzal NA, Upstill-Goddard R, Holloway JW, Simpson MA, Beattie RM et al. Next generation exome sequencing of paediatric inflammatory bowel disease patients identifies rare and novel variants in candidate genes. Gut. 2013;62(7):977–84.View ArticlePubMedGoogle Scholar
- Steinberg KM, Ramachandran D, Patel VC, Shetty AC, Cutler DJ, Zwick ME. Identification of rare X-linked neuroligin variants by massively parallel sequencing in males with autism spectrum disorder. Mol Autism. 2012;3(1):8.View ArticlePubMedPubMed CentralGoogle Scholar
- Ghosh S, Krux F, Binder V, Gombert M, Niehues T, Feyen O, Laws HJ, Borkhardt A. Array-based sequence capture and next-generation sequencing for the identification of primary immunodeficiencies. Scand J Immunol. 2012;75(3):350–4.View ArticlePubMedGoogle Scholar
- Li J, Zhu X, Wang X, Sun W, Feng B, Du T, Sun B, Niu F, Wei H, Wu X, et al. Targeted genomic sequencing identifies PRRT2 mutations as a cause of paroxysmal kinesigenic choreoathetosis. J Med Genet. 2012;49(2):76–8.View ArticlePubMedGoogle Scholar
- Nikopoulos K, Gilissen C, Hoischen A, van Nouhuys CE, Boonstra FN, Blokland EA, Arts P, Wieskamp N, Strom TM, Ayuso C, et al. Next-generation sequencing of a 40 Mb linkage interval reveals TSPAN12 mutations in patients with familial exudative vitreoretinopathy. Am J Hum Genet. 2010;86(2):240–7.View ArticlePubMedPubMed CentralGoogle Scholar
- Rehman AU, Morell RJ, Belyantseva IA, Khan SY, Boger ET, Shahzad M, Riazuddin S, Khan SN, Riazuddin S, et al. Targeted capture and next-generation sequencing identifies C9orf75, encoding taperin, as the mutated gene in nonsyndromic deafness DFNB79. Am J Hum Genet. 2010;86(3):378–88.Google Scholar
- Tewhey R, Warner JB, Nakano M, Libby B, Medkova M, David PH, Kotsopoulos SK, Samuels ML, Hutchison JB, Larson JW, et al. Microdroplet-based PCR enrichment for large-scale targeted sequencing. Nat Biotechnol. 2009;27(11):1025–31.View ArticlePubMedPubMed CentralGoogle Scholar
- Gnirke A, Melnikov A, Maguire J, Rogov P, LeProust EM, Brockman W, Fennell T, Giannoukos G, Fisher S, Russ C, et al. Solution hybrid selection with ultra-long oligonucleotides for massively parallel targeted sequencing. Nat Biotechnol. 2009;27(2):182–9.View ArticlePubMedPubMed CentralGoogle Scholar
- Albert TJ, Molla MN, Muzny DM, Nazareth L, Wheeler D, Song X, Richmond TA, Middle CM, Rodesch MJ, Packard CJ, et al. Direct selection of human genomic loci by microarray hybridization. Nat Methods. 2007;4(11):903–5.View ArticlePubMedGoogle Scholar
- Cao H, Wu J, Wang Y, Jiang H, Zhang T, Liu X, Xu Y, Liang D, Gao P, Sun Y, et al. An integrated tool to study MHC region: accurate SNV detection and HLA genes typing in human MHC region using targeted high-throughput sequencing. PLoS One. 2013;8(7):e69388.View ArticlePubMedPubMed CentralGoogle Scholar
- Porreca GJ, Zhang K, Li JB, Xie B, Austin D, Vassallo SL, LeProust EM, Peck BJ, Emig CJ, Dahl F, et al. Multiplex amplification of large sets of human exons. Nat Methods. 2007;4(11):931–6.View ArticlePubMedGoogle Scholar
- Nilsson M, Malmgren H, Samiotaki M, Kwiatkowski M, Chowdhary BP, Landegren U. Padlock probes: circularizing oligonucleotides for localized DNA detection. Science. 1994;265(5181):2085–8.View ArticlePubMedGoogle Scholar
- Narzisi G, Mishra B. Comparing de novo genome assembly: the long and short of it. PLoS One. 2011;6(4):e19175.View ArticlePubMedPubMed CentralGoogle Scholar
- Treangen TJ, Salzberg SL. Repetitive DNA and next-generation sequencing: computational challenges and solutions. Nat Rev Genet. 2011;13(1):36–46.PubMedPubMed CentralGoogle Scholar
- McCarthy A. Third generation DNA sequencing: pacific biosciences’ single molecule real time technology. Chem Biol. 2010;17(7):675–6.View ArticlePubMedGoogle Scholar
- Mikheyev AS, Tin MM. A first look at the Oxford Nanopore MinION sequencer. Mol Ecol Resour. 2014;14(6):1097–102.View ArticlePubMedGoogle Scholar
- Rhoads A, Au KF. PacBio sequencing and its applications. Genomics Proteomics Bioinformatics. 2015;13(5):278–89.View ArticlePubMedPubMed CentralGoogle Scholar
- Ferrarini M, Moretto M, Ward JA, Surbanovski N, Stevanovic V, Giongo L, Viola R, Cavalieri D, Velasco R, Cestaro A, et al. An evaluation of the PacBio RS platform for sequencing and de novo assembly of a chloroplast genome. BMC Genomics. 2013;14:670.View ArticlePubMedPubMed CentralGoogle Scholar
- Ritz A, Bashir A, Sindi S, Hsu D, Hajirasouliha I, Raphael BJ. Characterization of structural variants with single molecule and hybrid sequencing approaches. Bioinformatics. 2014;30(24):3458–66.View ArticlePubMedPubMed CentralGoogle Scholar
- Wang M, Beck CR, English AC, Meng Q, Buhay C, Han Y, Doddapaneni HV, Yu F, Boerwinkle E, Lupski JR, et al. PacBio-LITS: a large-insert targeted sequencing method for characterization of human disease-associated chromosomal structural variations. BMC Genomics. 2015;16:214.View ArticlePubMedPubMed CentralGoogle Scholar
- English AC, Richards S, Han Y, Wang M, Vee V, Qu J, Qin X, Muzny DM, Reid JG, Worley KC, et al. Mind the gap: upgrading genomes with Pacific Biosciences RS long-read sequencing technology. PLoS One. 2012;7(11):e47768.View ArticlePubMedPubMed CentralGoogle Scholar
- Rothe J, Watkins Jr NE, Nagy M. New prediction model for probe specificity in an allele-specific extension reaction for haplotype-specific extraction (HSE) of Y chromosome mixtures. PLoS One. 2012;7(9):e45955.View ArticlePubMedPubMed CentralGoogle Scholar
- Horton R, Wilming L, Rand V, Lovering RC, Bruford EA, Khodiyar VK, Lush MJ, Povey S, Talbot CC, Jr., Wright MW, et al. Gene map of the extended human MHC. Nat Rev Genet. 2004;5(12):889–99.View ArticlePubMedGoogle Scholar
- Clark PM, Kunkel M, Monos DS. The dichotomy between disease phenotype databases and the implications for understanding complex diseases involving the major histocompatibility complex. Int J Immunogenet. 2015;42(6):413–22.View ArticlePubMedGoogle Scholar
- de Bakker PI, Raychaudhuri S. Interrogating the major histocompatibility complex with high-throughput genomics. Hum Mol Genet. 2012;21(R1):R29–36.View ArticlePubMedPubMed CentralGoogle Scholar
- Rioux JD, Goyette P, Vyse TJ, Hammarstrom L, Fernando MM, Green T, De Jager PL, Foisy S, Wang J, de Bakker PI, et al. Mapping of multiple susceptibility variants within the MHC region for 7 immune-mediated diseases. Proc Natl Acad Sci U S A. 2009;106(44):18680–5.View ArticlePubMedPubMed CentralGoogle Scholar
- Trowsdale J. The MHC, disease and selection. Immunol Lett. 2011;137(1-2):1–8.View ArticlePubMedGoogle Scholar
- Horton R, Gibson R, Coggill P, Miretti M, Allcock RJ, Almeida J, Forbes S, Gilbert JG, Halls K, Harrow JL, et al. Variation analysis and gene annotation of eight MHC haplotypes: the MHC Haplotype Project. Immunogenetics. 2008;60(1):1–18.View ArticlePubMedPubMed CentralGoogle Scholar
- Traherne JA, Horton R, Roberts AN, Miretti MM, Hurles ME, Stewart CA, Ashurst JL, Atrazhev AM, Coggill P, Palmer S, et al. Genetic analysis of completely sequenced disease-associated MHC haplotypes identifies shuffling of segments in recent human history. PLoS Genet. 2006;2(1):e9.View ArticlePubMedPubMed CentralGoogle Scholar
- Stewart CA, Horton R, Allcock RJ, Ashurst JL, Atrazhev AM, Coggill P, Dunham I, Forbes S, Halls K, Howson JM, et al. Complete MHC haplotype sequencing for common disease gene mapping. Genome Res. 2004;14(6):1176–87.View ArticlePubMedPubMed CentralGoogle Scholar
- Allcock RJ, Atrazhev AM, Beck S, de Jong PJ, Elliott JF, Forbes S, Halls K, Horton R, Osoegawa K, Rogers J, et al. The MHC haplotype project: a resource for HLA-linked association studies. Tissue Antigens. 2002;59(6):520–1.View ArticlePubMedGoogle Scholar
- Schirmer M, Ijaz UZ, D'Amore R, Hall N, Sloan WT, Quince C. Insight into biases and sequencing errors for amplicon sequencing with the Illumina MiSeq platform. Nucleic Acids Res. 2015;43(6):e37.View ArticlePubMedPubMed CentralGoogle Scholar
- Duke JL, Lind C, Mackiewicz K, Ferriola D, Papazoglou A, Derbeneva O, Wallace D, Monos DS. Towards allele-level human leucocyte antigens genotyping - assessing two next-generation sequencing platforms: Ion Torrent Personal Genome Machine and Illumina MiSeq. Int J Immunogenet. 2015;42(5):346–58.View ArticlePubMedGoogle Scholar
- Bronner IF, Quail MA, Turner DJ, Swerdlow H. Improved protocols for illumina sequencing. Curr Protoc Hum Genet. 2014;18:18.2:18.2.1-18.2.42.Google Scholar
- Untergasser A, Cutcutache I, Koressaar T, Ye J, Faircloth BC, Remm M, Rozen SG. Primer3--new capabilities and interfaces. Nucleic Acids Res. 2012;40(15):e115.View ArticlePubMedPubMed CentralGoogle Scholar
- Kent WJ. BLAT--the BLAST-like alignment tool. Genome Res. 2002;12(4):656–64.View ArticlePubMedPubMed CentralGoogle Scholar
- Markham NR, Zuker M. UNAFold: software for nucleic acid folding and hybridization. Methods Mol Biol. 2008;453:3–31.View ArticlePubMedGoogle Scholar
- Gupta T, Marlow FL, Ferriola D, Mackiewicz K, Dapprich J, Monos D, Mullins MC. Microtubule actin crosslinking factor 1 regulates the Balbiani body and animal-vegetal polarity of the zebrafish oocyte. PLoS Genet. 2010;6(8):e1001073.View ArticlePubMedPubMed CentralGoogle Scholar
- Li H, Durbin R. Fast and accurate short read alignment with Burrows-Wheeler transform. Bioinformatics. 2009;25(14):1754–60.View ArticlePubMedPubMed CentralGoogle Scholar
- McKenna A, Hanna M, Banks E, Sivachenko A, Cibulskis K, Kernytsky A, Garimella K, Altshuler D, Gabriel S, Daly M. The Genome Analysis Toolkit: a MapReduce framework for analyzing next-generation DNA sequencing data. Genome Res. 2010;20(9):1297–303.View ArticlePubMedPubMed CentralGoogle Scholar
- Li H, Handsaker B, Wysoker A, Fennell T, Ruan J, Homer N, Marth G, Abecasis G, Durbin R. The sequence alignment/Map format and SAMtools. Bioinformatics. 2009;25(16):2078–9.View ArticlePubMedPubMed CentralGoogle Scholar